410-1503
- Constructed of 316L Stainless Steel.
- Fits BBC applications.
- 1" NPT inlet water crossover (allowing you to use a number of assorted fittings to adapt to your application).
- Includes bolts and gaskets.
|
|
625-4453
- Constructed of 316L stainless steel and billet aluminum.
- Offers a optional cooling system bypass port as well as a single inlet.
- Includes pulley for 454/502 Mag applications.
- This model ONLY fits 454/502
- Other models available for popular HP Mercury engines including the 500, 525, 600, and 700's.
- O-ring sealed, no gaskets required.
- Includes mounting bolts.
- Multiple plumbing options from three 1" NPT ports.
- Includes one 1" NPT x 1-1/4" Hose fitting and two 1" NPT pipe plugs.
- Allows for the removal of the factory power robbing circulating pump.
|
|
620-300100
- Eliminate your power robbing circulating pump!
- Constructed of 316L stainless steel.
- One large 1" bypass hose for increased water volume.
- Includes 142 degree thermostat.
- Includes Crossover, Thermostat housing, 142 degree thermostat, hose with clamps, bolts & gaskets.
|
|
625-4452
- Constructed of 316L stainless steel and billet aluminum water crossover.
- Offers a optional cooling system bypass port as well as a single inlet.
- No pulley included.
- Kits available for all popular HP Mercury engines including the 500, 525, 600, and 700's.
- O-ring sealed, no gaskets required.
- Includes mounting bolts.
- Multiple plumbing options from three 1" NPT ports.
- Includes one 1" NPT x 1-1/4" Hose fitting and two 1" NPT pipe plugs.
- Allows for the removal of the factory power robbing circulating pump.
|
|
625-4383
- 1" NPT Dual Inlet
- For Use with 1 or 2 Stage Sea Pump
- Includes #625-4382 high flow water inlet crossover in a dual inlet configuration.
- Extreme Series Power Steering Pump.
- Steering pump uses a short V-belt that is run off of a custom designed 2-groove sea pump pulley.
- Kit includes: a power steering pump, crossover with power steering mount, a dual groove sea pump pulley, the V-belt and mounting hardware.
|
|
625-4373
- 1-1/4" Single Inlet Crossover Power Steering System.
- For Use with 1 or 2 Stage Sea Pump
- Includes #625-4372 high flow water inlet crossover in a dual inlet configuration.
- Extreme Series Power Steering Pump.
- Steering pump uses a short V-belt that is run off of a custom designed 2-groove sea pump pulley.
- Kit includes a power steering pump, crossover with power steering mount, a dual groove sea pump pulley, the V-belt and mounting hardware.
|
|
410-1505
- Constructed of 316L Stainless Steel.
- 3/4" NPT outlet on the top of the crossover tube, for bypass.
- 1" NPT inlet.
- For BBC applications.
- Includes bolts and gaskets.
|
|
410-1504
- Constructed of 316L Stainless Steel.
- 1" slip-on on the top of the crossover tube(can be used to bypass water to the thermostat housing).
- 1-1/4" slip-on connection inlet fitting.
- O-ring sealed, no gaskets required.
- Includes bolts.
|
|
625-4380
- CNC machined from 6061-T6 billet aluminum
- These units fit all popular B/B GM type engines.
- Inlet hose barb fittings are available separately.
- Dual side entry 1" NPT inlets.
- O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
- Polished to a mirror finish or can be custom color finished by the customer.
- Inlet hose barb fitting sold separately.
|
|
625-4382
- CNC machined from 6061-T6 billet aluminum.
- Eliminates the need for any additional power steering brackets.
- These units fit all popular B/B GM type engines.
- Features power steering mounting ears to be used in conjunction with the Hardin Marine crossover mounted power steering pump.
- Inlet hose barb fittings are available separately.
- Dual 1" NPT inlets.
- Includes mounting bolts.
- O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
- Polished to a mirror finish or can be custom color finished by the customer.
|
|
625-4535 GM LS1 - LS3 Thermostatic Control Crossover Cooling System for Non-Circulating Pump Applications
AT last a cooling system solution for adapting the popular GM LS engine into any Jet Boat or application with an external water pump source. This system allows removal of the Automotive engine mounted water circulation pump and provides both water inlet/outlet and temperature control through the integrated thermostat assembly. Clean, simple, and reliable the perfect solution for retrofitting the LS modern engine into a jet boat or any boat not utilizing the OEM circulating pump.
WARNING**** will not work with Variable Valve Timing covers.
|
|
625-4454
- Constructed of 316L Stainless steel and billet aluminum water crossover.
- Allows for the removal of the factory power robbing circulating pump.
- Offers an optional cooling system bypass port as well as a single inlet.
- Fits HP500 only
- Includes pulley for HP500 Mercury engines. Use 625-4452 if you already have pulley
- O-ring sealed, no gaskets required.
- Includes mounting bolts.
- Multiple plumbing options from three 1" NPT ports.
- Includes one 1" NPT x 1-1/4" Hose fitting and two 1" NPT pipe plugs.
|
|
410-1506 This hose is a replacement hose for the one included in the 620-300100 Crossover Kit. 9" overall length on the long run, 4" overall length on the short run
|
|
410-1509
- Made from 316L Stainless Steel.
- Standard 1-1/4" Slip-On Port Entry Stainless Steel Water Inlet Crossover.
- Precisely machined inlet plates welded to a large diameter crossover tube to provide equal water distribution.
- Uses a standard 1-1/4" slip-on inlet connection.
- Port inlet configuration, (check before ordering) for Small Block Chevy engines only.
|
|
410-1512
- Constructed of 316L Stainless Steel.
- Standard 1-1/4" Slip-On Port Entry Stainless Steel Water Inlet Crossover.
- Precisely machined inlet plates welded to a large diameter crossover tube to provide equal water distribution.
- Uses a standard 1-1/4" slip-on inlet connection.
- Bypass
|
|
410-1510
- Constructed of 316L Stainless Steel.
- Standard 1-1/4" Slip-On Starboard Entry Stainless Steel Water Inlet Crossover.
- Precisely machined inlet plates welded to a large diameter crossover tube to provide equal water distribution.
- Uses a standard 1-1/4" slip-on inlet connection.
- Available in port and starboard inlet configuration, (check before ordering) for Small Block Chevy engines only.
|
|
625-4370
- Standard version of our single inlet crossover.
- Feature a single 90 degree 1-1/4” hose barb.
- Inlet can be clocked or indexed to different positions.
- Accommodates various water inlet hose routing.
- These units fit all popular B/B GM type engines.
- Dual side entry 1" NPT inlets also included.
- O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
- Polished to a mirror finish or can be custom color finished by the customer.
- Includes bolts and pipe plugs.
|
|
|
|
|
625-4372
- Low profile swivel 1-1/4"hose barb provision.
- Power steering pump mounting provision.
- CNC machined from 6061-T6 billet aluminum
- O-ringed on all sealing surfaces (eliminated the need for sealing gaskets).
- Polished to a mirror finish or can be custom color finished by the customer.
- Single center inlet 1-1/4" hose fitting.
- Dual side entry 1" NPT inlets also included.
- Inlet can be indexed or clocked to different positions.
- Fit all popular B/B GM type engines.
- Includes bolts and pipe plugs.
|
|
This Part has options, please click the button below to order.
620-300102
- Eliminate your power robbing circulating pump!
- Constructed of 316L stainless steel.
- One large 1" bypass hose for increased water volume.
- Includes 142 degree thermostat.
- Includes Crossover, Thermostat housing, 142 degree thermostat, hose with clamps, bolts & gaskets.
- NOTE: You may need to upgrade to a belt driven bravo sea water pump as applications without one may get too hot at idle.
|
|