710-12-920 In-Line Electric Fuel Pump
This electric fuel pump is for fuel injection systems and designed to work in-line for easy installation. It is rated for continuous duty service and has been tested up to 2,500 hours. It mounts below the fuel level of the tank for a good gravity feed on the inlet side. It includes a rubber isolator, mounting clamps, and electrical hardware.
|
|
710-20-78 Accelerator Pump Arm
Plastic 30cc accelerator Pump Arm
|
|
710-20-12 Accelerator Pump Cam
- Tailor Accelerator Pump Performance
- Each Cam is Different Shape/Profile
Accelerator pump shot relative to cam color from lightest to heaviest are as follows: White, Blue, Red, Orange, Black, Green, Pink & Brown
|
|
710-20-11 Accelerator Pump Conversion Kit - 50cc
Models
2300, 4150, 4160
Instantaneous response! Pull strongly through the RPM band! A
"must" for tunnel ram setups! This kit is for those who
demand ultimate performance from their Holley carburetor(s). The
Holley 50cc accelerator pump will substantially increase fuel
capacity over the standard 30cc pump system. Eliminates flat spots
off idle or at any other RPM range. This kit includes everything
required for easy installation including new pump housing, arm, diaphragm, spring and longer pump housing screws.
|
|
710-121-132 Accelerator Pump Discharge Nozzle
Accelerator Pump Discharge Nozzle 0.032 in. Hole Size Straight Type Includes 2 Gaskets
|
|
710-121-131 Accelerator Pump Discharge Nozzle
Accelerator Pump Discharge Nozzle 0.031 in. Hole Size Straight Type Includes 2 Gaskets
|
|
710-121-25 Accelerator Pump Discharge Nozzle
Accelerator Pump Discharge Nozzle 0.025 in. Hole Size Tube Type Includes 2 Gaskets
|
|
710-20-109-10 Accelerator Pump Spring 50cc (10 Pack)
|
|
710-108-51 Base Gasket
- Fits Holley Models 4150 and 4160
- 1-9/16” Throttle Bore
- 1/4” Thick
|
|
710-108-92-2 Blue Non-Stick Fuel Bowl Gasket
- Fits Holley Model 4165 and 4175
- Blue Non-Stick
- 2 per Pakage
|
|
710-12-704 Carbureted Fuel Pressure Regulator
- Adjustable fuel regulation from 4-1/2 to 9 psi
- One 1/2" NPT inlet and two 1/2" NPT outlet ports
- .437" (7/16") restriction
- Includes mounting hardware and an style fittings
- Alcohol compatible
|
|
710-135-5 Carburetor Diaphragm
30cc accelerator pump diaphragm (black) Rubber w/o Screws
|
|
710-135-7 Carburetor Diaphragm
Carburetor Diaphragm Diaphragms 50cc (black) Rubber w/o Screws
|
|
710-135-14 Carburetor Diaphragm 50cc
50cc accelerator pump diaphragm (black) rubber with screws
|
|
710-3-1184 Carburetor Rebuild Kit For PN [64-3006/64-3008/64-3010/64-3011] and numerous
other Holley 4150 Model 4 Bbl. applications.
This rebuild/renew kit is available for all marine carburetors as well as Carter and Rochester carburetors. It contains all parts and gaskets to restore performance to marine carburetors and includes:
- O-rings
- pump diaphragms
- needles and seats
- power valves
- and detailed instructions and hardware for a complete rebuild.
|
|
710-37-474 Carburetor Renew Kit for 2BBL 4412 Model 2300
- Serves All Holley Perf. Carburetors
- Genuine Holley Quality Parts
- Extra Parts For Perf. Tuning
- Step-By-Step Instructions
- Detailed Tuning Guide
|
|
710-37-720 Carburetor Renew Kit for Model 4160 600 cfm.
- Serves All Holley Perf. Carburetors
- Genuine Holley Quality Parts
- Extra Parts For Perf. Tuning
- Step-By-Step Instructions
- Detailed Tuning Guide
|
|
710-37-754 Carburetor Renew Kit for Model 4160 750 cfm.
- Serves All Holley Perf. Carburetors
- Genuine Holley Quality Parts
- Extra Parts For Perf. Tuning
- Step-By-Step Instructions
- Detailed Tuning Guide
|
|
710-20-37 Carburetor Throttle Stud
Throttle Stud 7/32" diameter
|
|
710-116-2 Center Hung Float Brass Kit
Use of brass floats on the secondary side of Model 4160 carburetors factory equipped with nitrophyl secondary floats such as part number 0-3310C for Example, may cause the float to contact the metering plate resulting on loss of fuel control and flooding.
|
|
