710-80320-1 Holley 0-80320-1 Model 2300 300 CFM Two Barrel Marine Carburetor - Application: Ford 302 CID (5.0L) V-8
Features:
- Model 2300
- Electric choke
- 30cc accelerator pump
-
Single fuel inlet
-
5" air horn
|
|
710-80364 Holley 0-80364 Model 4160 450 CFM Four Barrel Marine Carburetor - Application: Ford 302 CID (5.0L) V-8
Features:
- Model 4160
- Vacuum secondaries
- Electric choke
- 30cc accelerator pump
- Single fuel inlet
- 5" air horn
|
|
710-80443 Holley 0-80443 Model 4150 850 CFM Four Barrel Marine Carburetor with Mechanical Secondaries
Features:
- Model 4150
- Universal marine calibration
- Mechanical Secondaries
- Automatic electric choke
- "J" style vent tubes
- 30cc accelerator pump
- 50cc secondary pump
- Dual fuel inlet
- 5" air horn
|
|
710-80492 Holley 0-80492 Model 4160 600 CFM Four Barrel Marine Carburetor with Vacuum Secondaries - Application OMC/Volvo 4.3L V-6
Features:
- Model 4160
- Vacuum secondaries
- Electric choke
- 30cc accelerator pump
- Single fuel inlet
- 5" air horn
|
|
710-80537 Holley 0-80537 Model 4150 750 CFM Four Barrel Marine Carburetor with Mechanical Secondaries
All Holley Marine Carburetors are designed to meet Coast Guard specifications. A marine carburetors fuel metering system is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel/fumes back into the carburetor for safe operation while on rough waters.
Features:
- Gold Dichromate finish for corrosion resistance
- Manual (Cable driven, hand operated) choke for precise cold start control
- Dual feed fuel inlets for constant high volume fuel delivery
- Meets Coast Guard Specifications
Specs:
- Barrels 4
- Booster Down Leg
- Choke Manual
- Emission Code 3
- Throttle Bore 1.688 inch
|
|
710-80551 Holley 0-80551 Model 4160 600 CFM Four Barrel Marine Carburetor with Vacuum Secondaries
Features:
- Model 4160
- Universal marine calibration
- Vacuum secondaries
- "J" style vent tubes
- Electric choke
- 30cc accelerator pump
- Single fuel inlet
- 5" air horn
|
|
710-80559 Holley 0-80559 Model 4150 600 CFM Four Barrel Marine Carburetor with Mechanical Secondaries
Features:
- Model 4150
- Performance calibration
- Mechanical secondaries
- "J" style vent tubes
- Electric choke
- 30cc accelerator pump
- Dual fuel inlets
|
|
710-0-80903HBM The patent pending GEN 3 main–body is 5/16” taller than the previous generation! This new height allowed for larger radius air entries which were optimized using Computational Fluid Dynamics (CFD) software to deliver smoother flow into new fully machined, big bore venturii.
The main-body also features an integrated idle bypass valve that allows for idle adjustments while maintaining the correct throttle plate to transfer slot relationship as well as an extended air cleaner flange for easy air scoop attachment when using the available air scoop adapter.
The Gen 3 utilizes high capacity fuel bowls which feature 20% more fuel capacity to eliminate starvation, integrated fuel shelf to minimize fuel aeration and internal baffling to control fuel slosh.
Other features include all aluminum construction, 12-hole billet booster inserts, fully tunable billet metering blocks, adjustable external linkage, throttle position sensor mounting points and knurled (hand adjustable) curb idle screws. Each calibration has been dyno tested to deliver proven performance!
|
|
710-82500 Building on the proven performance and durability of the Aluminum Street Avenger Series- we have engineered the new marine models to continue that performance heritage that Holley is known for. The all-aluminum carburetors are hard coat anodized in a Hard Core Gray finish to protect them from corrosion in fresh water or salt water conditions. The new Marine Avengers are built to exceed the Coast Guard standards and are J1223 Marine Standard certified. So, if you are hitting the lake for an easy cruise or some high speed fun, the new Aluminum Marine Avengers will meet and exceed your performance demands! The Marine Avenger Carburetors come with the same Limited Lifetime Warranty as our Street Avengers do. Holley warrants its Marine Avenger Carburetor to be free from defects in material and workmanship for the life of the product on parts and one year on repair labor. After a period of one year, Holley will charge standard rates for repair labor.
All Holley Marine Avenger Carburetors are designed to meet Coast Guard specifications. A marine carburetors fuel metering system is calibrated to compensate for unique engine loads found on boats. The J-style vent tubes direct fuel/fumes back into the carburetor for safe operation while on rough waters. The Holley 0-82500 Marine carburetor is designed with a universal calibration good for small cubic inch marine engines where a 2300 model 2BBL with electric choke is required
Features:
- All aluminum construction
- Calibrated to compensate for unique engine loads found on boats
- Factory preset electric choke for easy startups
- Hard Core Gray finish for corrosion protection in marine environments
- Single feed fuel inlet for easy installation
- J-Style Vent Tubes
- Throttle shafts are PTFE coated for corrosion protection
- Meets Coast Guard Specifications
- 100% wet-flow tested by Holley technicians to assure it arrives ready to run!
|
|
710-82570 Building on the proven performance and durability of the Aluminum Street Avenger Series- we have engineered the new marine models to continue that performance heritage that Holley is known for. The all-aluminum carburetors are hard coat anodized in a Hard Core Gray finish to protect them from corrosion in fresh water or salt water conditions. The new Marine Avengers are built to exceed the Coast Guard standards and are J1223 Marine Standard certified.
So, if you are hitting the lake for an easy cruise or some high speed fun, the new Aluminum Marine Avengers will meet and exceed your performance demands!
The Marine Avenger Carburetors come with the same Limited Lifetime Warranty as our Street Avengers do. Holley warrants its Marine Avenger Carburetor to be free from defects in material and workmanship for the life of the product on parts and one year on repair labor. After a period of one year, Holley will charge standard rates for repair labor.
Features:
- All aluminum construction
- Hard Coat Gray finish for corrosion protection in marine environments
- Built to exceed Coast Guard standards and are J1223 Marine Standard Certified
- Dual metering block system utilizing four corner idle adjustment for precision tuning
- Throttle shafts are PTFE coated for corrosion protection
- Calibrated to compensate for unique engine loads found on boats
- Available in 570 CFM, 670 CFM, and 770 CFM sizes to match your application needs
- 5-1/8" 4150 Flange
- Limited Lifetime Warranty
|
|
This Part has options, please click the button below to order.
710-82670 Building on the proven performance and durability of the Aluminum Street Avenger Series- we have engineered the new marine models to continue that performance heritage that Holley is known for. The all-aluminum carburetors are hard coat anodized in a Hard Core Gray finish to protect them from corrosion in fresh water or salt water conditions. The new Marine Avengers are built to exceed the Coast Guard standards and are J1223 Marine Standard certified.
So, if you are hitting the lake for an easy cruise or some high speed fun, the new Aluminum Marine Avengers will meet and exceed your performance demands!
The Marine Avenger Carburetors come with the same Limited Lifetime Warranty as our Street Avengers do. Holley warrants its Marine Avenger Carburetor to be free from defects in material and workmanship for the life of the product on parts and one year on repair labor. After a period of one year, Holley will charge standard rates for repair labor.
Features:
- All aluminum construction
- Hard Coat Gray finish for corrosion protection in marine environments
- Built to exceed Coast Guard standards and are J1223 Marine Standard Certified
- Dual metering block system utilizing four corner idle adjustment for precision tuning
- Throttle shafts are PTFE coated for corrosion protection
- Calibrated to compensate for unique engine loads found on boats
- Available in 570 CFM, 670 CFM, and 770 CFM sizes to match your application needs
- 5-1/8" 4150 Flange
- Limited Lifetime Warranty
|
|
710-82770 Building on the proven performance and durability of the Aluminum Street Avenger Series- we have engineered the new marine models to continue that performance heritage that Holley is known for. The all-aluminum carburetors are hard coat anodized in a Hard Core Gray finish to protect them from corrosion in fresh water or salt water conditions. The new Marine Avengers are built to exceed the Coast Guard standards and are J1223 Marine Standard certified.
So, if you are hitting the lake for an easy cruise or some high speed fun, the new Aluminum Marine Avengers will meet and exceed your performance demands!
The Marine Avenger Carburetors come with the same Limited Lifetime Warranty as our Street Avengers do. Holley warrants its Marine Avenger Carburetor to be free from defects in material and workmanship for the life of the product on parts and one year on repair labor. After a period of one year, Holley will charge standard rates for repair labor.
Features:
- All aluminum construction
- Hard Coat Gray finish for corrosion protection in marine environments
- Built to exceed Coast Guard standards and are J1223 Marine Standard Certified
- Dual metering block system utilizing four corner idle adjustment for precision tuning
- Throttle shafts are PTFE coated for corrosion protection
- Calibrated to compensate for unique engine loads found on boats
- Available in 570 CFM, 670 CFM, and 770 CFM sizes to match your application needs
- 5-1/8" 4150 Flange
- Limited Lifetime Warranty
|
|
710-9015 Holley 0-9015-1 Model 4160 750 CFM Four Barrel Marine Carburetor
Features:
- Model 4160
- Universal marine calibration
- Vacuum secondaries
- Electric choke
- "J" style vent tubes
- 30cc accelerator pump
- Dual fuel inlet
- 5" air horn
Optional Kit:
P/N 3-720 Renewal Kit
20-13 Secondary spring asst
20-59 Secondary quick change spring kit
|
|
710-712-815-1 Holley Black Pump 140 GPH Free Flowing Pre-set at 14 PSI
- Meets U.S. Coast Guard regulations
- Free-flow capacity of 140 gallons per hour / 530 liters per hour
- Flows 120 gallons per hour maintaining 9 psi line pressure
- Pressure is pre-set at 14 psi (approximately)
- Maximum pressure is 14 psi
- Compatible with alcohol or methanol fuels
- Not designed or recommended for use with fuel injection systems
- Has externally accessible pressure relief valve
- Tumble polished billet look
- Lower housing casting designed for enhanced fuel flow and quiet operation
- Motor draws only 4 amps current
- 7-1/2 amp fuse recommended
- Provides constant fuel flow with no pulsation
- Rotor/vane pump design is more tolerant of contaminated fuels
- Weighs only 3 lbs
- Includes mounting bracket
- Can be serviced from the pump end
A Regulator is sold separately.
The Holley fuel pumps meet USCG requirements and are a great reliable fuel supply for any marine engine. Each pump includes a mounting bracket and fuel/fume vent tube These pumps weigh less than 3 pounds and come with 3/8" NPT inlet and outlet provisions.
|
|
710-712-802-1 Holley Blue Pump 110 GPH Free Flowing Pre-set at 14 PSI
A regulator is included to tailor your fuel pressure to your determined
limit. The Holley fuel pumps meet USCG requirements and are a great reliable
fuel supply for any marine engine. Each pump includes a mounting bracket and
fuel/fume vent tube These pumps weigh less than 3 pounds and come with 3/8" NPT
inlet and outlet provisions.
|
|
710-108-12 Holley Carburetor mounting gasket for 4 barrel Carburetors. Open center. Thick 0.313" gasket.
|
|
710-300-130 Got an LS engine to get running? Nothing is easier than bolting on a carburetor. Holley's dual plane carbureted intake for GM's LS engines will help you get on the streets quick!
Its dual plane design makes it perfect for low end torque, yet it still pulls all the way to 6,500 RPM! Our O–ring cylinder head mounting flange gaskets provide an OEM style seal and make installation a snap. Bolt one on today!
Features:
- 1500-6500 RPM power band
- 4150 Square bore flange
- Optimized runner layout and constant cross sectional area - broad torque curve, best vehicle performance from 1500-6500 RPM
- Minimum carb flange height means it fits in vehicles with minimal or no hood modifications
- Great for carbureted or throttle body EFI street applications
- Cast aluminum construction and efficient casting design for light weight, consistent wall thicknesses and improved casting quality
- Weighs 15.14 lbs.
- Height (front) - 5.07" from front lifter valley cover to carb mounting flange
- Height (rear) - 6.14" from rear lifter valley cover to carb mounting flange
- Port size - 2.72" height x 1" wide
- Mounting flange gasket type - O-ring
- Includes Viton® O-rings - Viton® is a registered trademark of DuPont Performance Elastomers
|
|
710-241-182 Holley LS Chevy Valve Covers - Black
Holley's new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies, and a vintage style finned overcover that hides the unsightly LS coils and messy wiring harness - allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simplified version of our Vintage Series style fins that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14" round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.
Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers are now offered in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins).
- Cast aluminum 2-Piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies
- Retain the performance of factory coil-on-cover ignition without the unsightly styling
- Base fits LS1, LS2, LS3, LS6 and LS7 engines with clearance for .750” lift cam with stock style rocker arms
- Base features internally baffled ventilation system
- Coil cover features Holley vintage style fins and cast-in wiring provisions
- No coil relocation, wire harness extensions, or custom spark plug wires required
- Includes low-profile billet oil fill cap
- Includes all necessary coil mounting and dress-up hardware
|
|
710-241-181 Holley LS Chevy Valve Covers - Polished
Holley's new 2-Piece LS valve covers are a great way to update the look of your LS engine without the use of complicated adapter systems or the hassle of remote coil relocation. These modular LS valve covers feature an OE height, internally baffled LS valve cover base with integrated coil mounts for popular Gen I and Gen V style LS coil bodies, and a vintage style finned overcover that hides the unsightly LS coils and messy wiring harness - allowing the full performance benefits of coil-on-cover ignition setups without the robotic styling. Each modular coil cover features a simplified version of our Vintage Series style fins that seamlessly blends with other finned Holley dress-up accessories such as our LS valley covers and 14" round air cleaners. The coil cover also features cast-in provisions for the spark plug boots and coil wiring harness so no extensions or custom wiring is required.
Each 2-Piece LS valve cover set includes a low-profile billet oil fill cap, hardware and spacers for mounting both versions of LS coil bodies, and 12-point dress up hardware and rubber grommets for the coil covers. These modular LS valve covers are now offered in 5 unique finishes: natural cast, polished, satin black, factory orange, and gloss red (black, factory orange and gloss red sets feature machined fins).
- Cast aluminum 2-Piece LS valve covers designed to mount and hide both Gen I and Gen V style LS coil bodies
- Retain the performance of factory coil-on-cover ignition without the unsightly styling
- Base fits LS1, LS2, LS3, LS6 and LS7 engines with clearance for .750” lift cam with stock style rocker arms
- Base features internally baffled ventilation system
- Coil cover features Holley vintage style fins and cast-in wiring provisions
- No coil relocation, wire harness extensions, or custom spark plug wires required
- Includes low-profile billet oil fill cap
- Includes all necessary coil mounting and dress-up hardware
|
|
710-300-124 Holley LS Hi-Ram EFI Manifold
- Runner Length – 6.29”, As-Cast Runner Cross-Sectional Area – Tapered 4.67in² to 2.84 in²
- Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height – 8.42” (from engine block lifter valley cover flange), Longitudinal Location – 3.84” (forward from engine block front flange), Angle – 25 deg. (down from vertical)
- Plenum Top Gasket Type – 3/32” Round O-ring Cord
- Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
- Port Size – 2.49” Height x 1.21” Wide
- Total Height with 92/102mm EFI Plenum Top – 12.32” to the lifter valley cover flange on engine block.
- Base Plenum Top Mounting Flange Height – 8.42” to the lifter valley cover flange on engine block.
These parts should be used for the following applications: Racing/Performance/Street Rodder where hood restrictions are NOT a consideration. Top can be mounted forward or backward.
Holley EFI LS main harnesses have a map sensor connecter designed for use with an LS1/2 style map sensor. The 558-416 is an adapter harness that can be used to adapt any LS harness that uses a LS1/2 MAP sensor connection to a LS3 MAP, which is recommended for this manifold.
|
|
