755-8644
Hardin Billet Aluminum Flywheel Internal Balance for GM (LS1-LS7)
Ring Gear Tooth Quantity:168-tooth, Rear Main Seal Style:1-piece, Flywheel Material:Aluminum
These precision billet aluminum flywheels deliver all of the strength and reliability that you desire with the light weight and advantages that only aluminum can provide. Lightweight Aluminum alloy flywheels can offer substantial benefits for certain situations such as light weight boats or racing boats that need rapid engine rpms instantaneously. These are recommended as replacements for factory-cast flywheels in high performance and racing applications. They're better for acceleration of heavier race boats. All Hardin flywheels are CNC-machined from certified materials.
- Accepts Mercury HP couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- Bottom Mount Starter Flywheel
- Weight: 12 lbs
|
|
755-8650 Internal Balance Alum. Flywheel LS 1, 2, 3, 6, 7 Chevy (Top/Bellhousing Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 12 lbs.
|
|
755-8651 Internal Balance Alum. Flywheel LSA/LSX Chevy (Bottom Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 12 lbs
|
|
755-8653 Internal Balance Alum. Flywheel LSA/LSX Chevy (Top Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 12 lbs.
|
|
This Part has options, please click the button below to order.
625-8535 In the world of professional offshore powerboat racing the top teams are always looking for ways to save weight without sacrificing performance and durability Hardin Marine knows there is no better way to test a product than to expose it to the abuses and demands of full blown racing While tested in extreme conditions these mounts are still right at home in a recreational pleasure boat.
While bearing the same nominal measurements as the factory Mercury Racing engine mounts that’s where the similarities end. These engine mounts are CNC machined from aero space grade 6061-T6 billet aluminum. Front mounts feature our exclusive billet engine block mounting pads. These pads form a structural bridge like connection to the base of the engine mount. They also provide for an optional speedy engine removal option while the base mount stays in the boat.Next the mounts are machined to accept precision stainless steel bushings in the mounting hole locations to ensure a secure fit and prevent premature wear.
So if your looking for the strongest and lightest engine mount option (half the weight of conventional steel mounts) then there is no better choice than these mounts. The staggered or side by side mounts are perfect for vee bottom installations.
NOTE: THESE ARE RAW FINISH
|
|
This Part has options, please click the button below to order.
625-8529 In the world of professional offshore powerboat racing the top teams are always looking for ways to save weight without sacrificing performance and durability Hardin Marine knows there is no better way to test a product than to expose it to the abuses and demands of full blown racing While tested in extreme conditions these mounts are still right at home in a recreational pleasure boat.
While bearing the same nominal measurements as the factory Mercury Racing engine mounts that’s where the similarities end. These engine mounts are CNC machined from aero space grade 6061-T6 billet aluminum. Front mounts feature our exclusive billet engine block mounting pads. These pads form a structural bridge like connection to the base of the engine mount. They also provide for an optional speedy engine removal option while the base mount stays in the boat.Next the mounts are machined to accept precision stainless steel bushings in the mounting hole locations to ensure a secure fit and prevent premature wear. After construction of the mounts they are then black hard coat anodized for corrosion resistance and long life.
So if your looking for the strongest and lightest engine mount option (half the weight of conventional steel mounts) then there is no better choice than these mounts.
NOTE: THESE ARE RAW FINISH
|
|
625-4533
- 6061 T6 Aluminum Grained and Clear Anodized
- Slotted to mount to the different sized Water Pumps
- 1" NPT inlet. No fittings are included.
|
|

625-8312 LS platform is rapidly being recognized by boaters around the world as the current and future platform for performance and reliability. Hardin Marine has always been at the forefront of engine development and the new Billet-Track LS accessory kit is just one more example.The perfect solution for mounting accessory components on the popular LS-1, LS-2, LS-3 and LS-6 used in engine swap applications.
The kit is engineered from 6061-T6 aluminum is precision CNC machined for strength and perfect fitment keeping a tight profile to the engine block. This all in one system kit includes a custom aluminum circulating pump, Billet crank pulley, Hardin Marine stainless steel water pump and billet pulley, power steering pump and billet pulley, High output 100amp alternator, Polished billet aluminum brackets and hardware, Stainless steel water inlet tube, and to keep it all spinning in style under constant tension a billet aluminum belt tensioner.
This system is sold without a closed cooling tank, however it MUST USE a closed cooled tank of some kind. This system in not designed for raw water cooling. System engineered to work with Fluidamper balancer #212-620121
- 100 amp internal fan alternator
- Billet polished aluminum alternator pulley
- Natural finish custom aluminum LS circulating water pump
- Billet Polished aluminum circulating water pump pulley
- Billet Polished aluminum accessory bracket
- Billet Polished aluminum Serpentine belt tensioner
- Billet Polished aluminum tensioner pulley
- Billet Polished aluminum crankshaft pulley
- Goodyear Gatorback serpentine belt
These will NOT work with IMCO, MP, or front inlet exhaust systems.
These WILL work with Seaward, Hardin Cyclone, Lightning and CMI exhaust systems
|
|

625-8313 LS platform is rapidly being recognized by boaters around the world as the current and future platform for performance and reliability. Hardin Marine has always been at the forefront of engine development and the new Billet-Track LS accessory kit is just one more example.The perfect solution for mounting accessory components on the popular LS-1, LS-2, LS-3 and LS-6 used in engine swap applications.
The kit is engineered from 6061-T6 aluminum is precision CNC machined for strength and perfect fitment keeping a tight profile to the engine block. This all in one system kit includes a custom aluminum circulating pump, Billet crank pulley, Hardin Marine stainless steel water pump and billet pulley, power steering pump and billet pulley, High output 100amp alternator, Polished billet aluminum brackets and hardware, Stainless steel water inlet tube, and to keep it all spinning in style under constant tension a billet aluminum belt tensioner.
This system has an included closed cooling tank that MUST BE USED. This system in not designed for raw water cooling. System engineered to work with Fluidamper balancer #212-620121
- 100 amp internal fan alternator
- Billet polished aluminum alternator pulley
- Natural finish custom aluminum LS circulating water pump
- Billet Polished aluminum circulating water pump pulley
- Billet Polished aluminum accessory bracket
- Billet Polished aluminum Serpentine belt tensioner
- Billet Polished aluminum tensioner pulley
- Billet Polished aluminum crankshaft pulley
- Goodyear Gatorback serpentine belt
- Polished Stainless Steel water inlet tube
These will NOT work with IMCO, MP, or front inlet exhaust systems.
These WILL work with Seaward, Hardin Cyclone, Lightning and CMI exhaust systems
|
|
625-4536 Bypass Hose Kit GM LS1 - LS3 Thermostatic Cooling System
For use with 625-4530 Thermostatic Cooling System.
|
|

620-32550 Cyclone Water Jacketed Headers for GM LS a - Fully Polished - Pair of Headers for one engine.
This new cyclone header system is designed specifically for GM LS engines.
This Cyclone wet exhaust series header works perfectly on both
stock and modified performance applications. Tailpipes not included with this kit.
If you are one of thousands of performance boaters seeking the power and styling from stainless
steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone"
header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and
CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact
tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution
to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing
process that multiplies the durability factor of the header many times over while providing added
protection against corrosion. But the heart of these systems lies in the ability to generate loads of
additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these
systems are capable of maximizing the broadest low end and midrange torque, all the while yielding
incredible peak power gains. These systems are available in many configurations to fit every boaters needs.
Rest assured when you lay down your hard earned money because the system comes complete with
all necessary mounting bolts, gaskets, and shift and oil filter brackets making installation a snap.
Additional Information:
|
|

620-32574 Cyclone Water Jacketed Header System For GM LS and Standard Dimension Bravo - HP Risers - Fully Polished - Pair of Headers for one engine.
This new cyclone header system is designed specifically for GM LS engines. The HP tailpipes are set up for standard Bravo exit locations.
This Cyclone wet exhaust series header works perfectly on both
stock and modified performance applications This header mixes
engine cooling water with the exhaust near the end of the tailpipe That
allows you to use a 4" rubber hose connection to attach your transom
mounted exhaust tips This is the perfect replacement for your factory
exhaust system. Gaskets, and bolts
included.
If you are one of thousands of performance boaters seeking the power and styling from stainless
steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone"
header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and
CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact
tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution
to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing
process that multiplies the durability factor of the header many times over while providing added
protection against corrosion. But the heart of these systems lies in the ability to generate loads of
additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these
systems are capable of maximizing the broadest low end and midrange torque, all the while yielding
incredible peak power gains. These systems are available in many configurations to fit every boaters needs.
Rest assured when you lay down your hard earned money because the system comes complete with
all necessary mounting bolts, gaskets, and shift and oil filter brackets making installation a snap. This kit includes one (1) O2 bung standard, if you need a 2nd O2 bung on your kit, see related parts below.
Additional Information:
|
|

620-32570 Cyclone Water Jacketed Header System For GM LS and Standard Dimension Bravo - Fully Polished - Pair of Headers for one engine.
This new cyclone header system is designed specifically for GM LS engines. The tailpipes are set up for standard Bravo exit locations.
This Cyclone wet exhaust series header works perfectly on both
stock and modified performance applications This header mixes
engine cooling water with the exhaust near the end of the tailpipe That
allows you to use a 4" rubber hose connection to attach your transom
mounted exhaust tips This is the perfect replacement for your factory
exhaust system. Gaskets, and bolts
included.
If you are one of thousands of performance boaters oseeking the power and styling from stainless
steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone"
header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and
CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact
tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution
to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing
process that multiplies the durability factor of the header many times over while providing added
protection against corrosion. But the heart of these systems lies in the ability to generate loads of
additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these
systems are capable of maximizing the broadest low end and midrange torque, all the while yielding
incredible peak power gains. These systems are available in many configurations to fit every boaters needs.
Rest assured when you lay down your hard earned money because the system comes complete with
all necessary mounting bolts, gaskets, and shift and oil filter brackets making installation a snap. This kit includes one (1) O2 bung standard, if you need a 2nd O2 bung on your kit, see related parts below.
Additional Information:
|
|

620-32560 Cyclone Water Jacketed Header System For GM LS with Turbo Adapter Flange - Fully Polished - Pair of Headers for one engine.
This new cyclone header system is designed specifically for GM LS engines. The header has an adapter flange set up to easily adapt a turbo for use with the system.
This Cyclone wet exhaust series header works perfectly on both
stock and modified performance applications This header mixes
engine cooling water with the exhaust near the end of the tailpipe That
allows you to use a 4" rubber hose connection to attach your transom
mounted exhaust tips This is the perfect replacement for your factory
exhaust system. Gaskets, and bolts
included.
If you are one of thousands of performance boaters seeking the power and styling from stainless
steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone"
header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and
CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact
tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution
to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing
process that multiplies the durability factor of the header many times over while providing added
protection against corrosion. But the heart of these systems lies in the ability to generate loads of
additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these
systems are capable of maximizing the broadest low end and midrange torque, all the while yielding
incredible peak power gains. These systems are available in many configurations to fit every boaters needs.
Rest assured when you lay down your hard earned money because the system comes complete with
all necessary mounting bolts, gaskets, and shift and oil filter brackets making installation a snap.
Additional Information:
|
|
620-32496 Exhaust Gaskets for LS Marine Aluminum Exhaust Manifold System
Replacement Exhaust Gaskets for the 620-32940 or 620-32942 LS Exhaust Systems or IMCO LS Exhaust Systems. Sold in pairs for one engine.
|
|
620-24132 Exhaust Manifold To Riser Gaskets - LS Manifolds (each)
Replacement gaskets for the 620-32950 LS manifolds. Each gasket is designed to withstand the high temperatures of marine exhaust applications. Gaskets are sold individually.
Bolt hole center to center is approx 4.75" x 3".
|
|
620-32941 Extra O2 Bung for LS Marine Aluminum Exhaust Manifold System
The 620-32940 Exhaust System comes with a single O2 Bung, however some systems require a 2nd O2 bung. Order this part alongside a 620-32940 system to have two O2 bungs.
|
|

625-4117 Hardin Marine is the first to bring a engine specific sea water pump for the popular LS series of engines. This dual stage sea water pump was designed around the 5.3 ,6.0, and 6.2 liter generation engine platforms. The pump uses Hardin Marine's Extreme Lifetime Series stainless steel impeller housing as well as a proprietary short body construction that allows the necessary access or clearance for the engines factory engine mounting pads when the pump is installed. The pump is designed to mount to the engine blocks factory A/C mounting bosses while positioning the billet aluminum serpentine pulley in line with OEM crankshaft pulley. The billet mounting bracket provides the two necessary idlers that allow this pump to be incorporated into most factory automotive serpentine accessory drive systems. The Sea pump features female (2) 1" NPT and (1) 1-1/4" common inlet and outlet ports for ease of plumbing convenience.
Note: Fits OEM GM LS Corvette / CTS-V / G8 automotive balancer spacing with 1-1/2" offset (NOT Truck or F-Body balancer)
|
|

625-4116 Hardin Marine is the first to bring a engine specific sea water pump for the popular LS series of engines. This single stage sea water pump was designed around the 5.3 ,6.0, and 6.2 liter generation engine platforms. The pump uses Hardin Marine's Extreme Lifetime Series stainless steel impeller housing as well as a proprietary short body construction that allows the necessary access or clearance for the engines factory engine mounting pads when the pump is installed. The pump is designed to mount to the engine blocks factory A/C mounting bosses while positioning the billet aluminum serpentine pulley in line with OEM crankshaft pulley. The billet mounting bracket provides the two necessary idlers that allow this pump to be incorporated into most factory automotive serpentine accessory drive systems. The Sea pump features female 1" NPT inlet and outlet ports for ease of plumbing convenience.
Note: Fits OEM GM LS Corvette / CTS-V / G8 automotive balancer spacing with 1-1/2" offset (NOT Truck or F-Body balancer)
|
|
625-4526 GM LS Series Remote Side Mount Oil Filter Adapter
Earl's billet side mount oil cooler adapters are the slick way to add an oil cooler to your GM LS or Gen-V LT engine. The slim design of these adapters clear most headers and other components and feature -10 AN male connections. These adapters are black anodized and use O-Ring seals for a leak free installation. Fits OEM & Holley Wet Sump oil pans only (Does not Fit Dry Sump Engines).
- Billet Aluminum w/ Black Anodized Finish
- Includes 0-Ring Seal & Hardware
- (2) 1/8” NPT Accessory Ports
- -10 AN Male Connections
- Available w/ 180 Degree Thermostat
- Add an Earl’s Oil Cooler and AN Plumbing to Complete the Installation
|
|