625-4535 GM LS1 - LS3 Thermostatic Control Crossover Cooling System for Non-Circulating Pump Applications
AT last a cooling system solution for adapting the popular GM LS engine into any Jet Boat or application with an external water pump source. This system allows removal of the Automotive engine mounted water circulation pump and provides both water inlet/outlet and temperature control through the integrated thermostat assembly. Clean, simple, and reliable the perfect solution for retrofitting the LS modern engine into a jet boat or any boat not utilizing the OEM circulating pump.
WARNING**** will not work with Variable Valve Timing covers.
|
|
625-4530 GM LS1 - LS3 Thermostatic Cooling System for Freshwater Sterndrive Applications
As Hardin Marine continues the quest towards new product development they have designed an easy to install thermostatic cooling system for freshwater raw water cooled engine applications. This system allows use of an OEM circulating style water pump and multiple accessory drive kits to to be used while providing the necessary thermostat assembly for temperature control. This is perfect for retrofitting a GM LS based engine into most popular sterndrive engine applications using a sea water pump assembly. Precision CNC machined and anodized satin finish make for an attractive compact fitment. Each unit features a 160 degree thermostat while other heat range thermostats and a bypass hose assembly is sold separately.
|
|
625-458 These are the same coolers OEM Engine manufactures use on their LSA Marine engine conversions. The OEM manufacturer builds their own bracketry and it IS NOT available. So if you plan on buying these units each has a mounting bolt pad but you will need to build YOUR OWN bracketry. If you do not understand closed cooling seek a professional engine builder. There is NOT additional specs available what you see is what we sell we have attached plumbing instructions and some diagrams to assist. They are sold as tanks ONLY for both the engine and the intercooler. Seek a knowledgeable professional for installation.
|
|
755-8643
Hardin Steel Flywheel Internal Balance GM (LS1-LS7)
Ring Gear Tooth Quantity:168-tooth, Rear Main Seal Style:1-piece, Flywheel Material: Steel
These precision steel flywheels deliver all of the strength and reliability that you need in a performance application) Cast flywheels are porous units designed for low rpm truck and industrial applications) Steel provides a shatter free strength that could mean the difference between ripping your boat in half under way. These neutrally balanced units drilled to accept popular Mercruiser high Performance couplers.
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Zero/neutral balance • 168 tooth gear
- Bottom Mount Starter Flywheel
- Weight: 32 Lbs
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> This is a "TRUE" High Performance 1.4KW LS marine starter designed for use on late model GM LS Chevrolet marine engine application including 4.8,5.3,6.0,6.2, and 7.0 Litre versions. The application has a slight off-set and uses the OE bolts for installation and features Genuine precision N.D starter motor coupled to patented design billet mount. Available in Short and Long gear versions
Technical specs:
- Rotation CW
- kW 1.4
- Gearing 4.44 to 1
- Rotatable Yes
- Voltage 12v
USCG Approved (SAE J1171)
|
|
625-8548 LS Alternator Bracket, Fits the 4.8, 5.3 and 6.0
This LS alternator bracket fits the 4.8, 5.3 and 6.0 iron block engines with the iron lower stock pulley. It mounts to the upper port cylinder head with the 2 supplied metric bolts. The bracket fits the Denso style 7si case alternators with 2 options available. The 70 amp 602-20112 and the 100 amp version 620-3146. This is available as a bracket only or as a kit which includes the bracket, alternator, and belt which is part number 625-8551.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> LS Billet Aluminum Direct Mount Engine Dipsticks
It’s just that easy! Our Billet Aluminum Direct Mount Gauge To Fit Engine Dipsticks feature an E-Z to Read flexible inner cable, plus they mount directly into the factory dipstick tube making them the ideal replacement for factory dipsticks and handles. Fits GM LS Series. Available in black or polished. Dipstick is 48" long and you cut to length to fit your application.
|
|
625-4563 LS Circulating Pump Pulley
|
|
625-8541 LS Front Port Alternator Adjusting Arm
The Billet aluminum Alternator adjusting arm was designed specifically to aid in mounting of certain Alternators with the Hardin Marine LS engine mount rail kit #625-8538. The Billet Arm is satin raw finished and includes a 10MM mounting bolt as well as a lower mounting bolt hardware. This arm was designed to allow for alternator # 620-3146 or similar alternator with a mounting span from 6-1/4 to 6-3/4"
|
|
625-4520 LS Steam Tube Kit w/ Stainless Steel Hard Line Tubing
Earl's hard line steam tube kit is designed to eliminate trapped air and steam from your engine to prevent hot spots & overheating. Easy bolt-on installation when used with pivoting steam vent adapters - part #625-4521 (2 sets required). Made from attractive stainless steel tubing & black anodized components.
This steam tube kit works w/ the Holley LS Hi-Ram, Holley Single Plane, and Sniper Fabricated Intake Manifolds for the GM LS Engine.
Features:
- Steam Tube Kit Eliminates Trapped Air and Steam from Your Engine to Prevent Hot Spots & Overheating
- Custom Look That is More Attractive than Original Equipment (OE) Hard Lines
- Use w/ Adjustable Pivoting Steam Vent Adapters for Easy Installation
- Four Corner Style - Allows Flow of Steam & Coolant from Front & Back of Cylinder Heads
- Made from Stainless Steel Tubing & Black Anodized Aluminum Components – for Corrosion Protection & a Great Look
- Outlet Size - Use w/ 1/4" Hose
|
|
625-4521 The original GM brazed vent tube manifold does not take into consideration the aftermarket intakes and accessories we put on our performance boats. Replace the rigid hard lines with these adjustable outlet, O-ring seal adapters that converts to -3 or -4 AN plumbing. These steam tube adapters are the most adjustable and lowest profile available. These adapters LOOK as nice as they are installation friendly. There are 6 kits available to allow for the optimal routing on your application including at dual outlet option which eliminates needing a T adapter. -3 Single Out Vent Adapters (One Pair).
|
|
625-4562K Water Circulating Pump for LS Engines.
|
|
625-8545 GM LS Marine engine conversions have grown at a speed no one could have gauged until now. Hardin Marine has been at the forefront of the LS marine engine movement for the past number of years bringing to market a cooling system and exhaust option.
But one hurdle of the engine swap on popular Bravo/Alpha applications has left boaters to fend for themselves on solutions or makeshift homegrown engine mount remedies. So the folks at Hardin took to build a direct replacement engine block mount that allows a popular GM LS1, LS2, LS3 to be dropped right back onto the OEM Stud factory mount or the High Performance Hardin Marine stud mount #620-52380. Sea Pump #625-4117 will not work with these brackets.
|
|
625-4574 LS1, LS2, LS3 and LS6 Closed Cooling Kit - Copper / Brass
While there are numerous universal OEM closed cooling kits, this is not one of those. This is a true custom engineered and developed closed cooling system designed around new LS1, LS2, LS3 and LS6 applications. The kit is perfect for engines making up to 650 horsepower.
We offer the closed cooling tank version with a pre-primed coat, where you can paint-to-finish. This allows you to customize it to your engine for the ultimate in appearance and durability. This High Performance Closed Cooling kit is designed for applications with horsepower levels to 650HP.
The Kit comes with: Tank, Brackets, Hoses.
NOTE: Will not work with port side mounted sea pumps 625-4116, 625-4117.
These will NOT work with IMCO, MP, or front inlet exhaust systems.
These WILL work with Seaward, Hardin Cyclone, Lightning and CMI exhaust systems
|
|
625-8546 Marine GM LS Engine Front and Rear Mounting Plates
The GM LS based engine family has already dominated the automotive industry and has quickly become the high performance standard in the performance boating world. These brackets make installing a LS in your favorite boat a reality.
The GM LS 1,2,3, and 6 series engines can use these Solid Works/CAD engineered engine mounting brackets. These engine mounts are perfect for the boater that wants to make the switch to modern efficient engines.
Manufactured from 6061 T-6 aluminum and CNC machined from 3/8" thick motor mounts are 26" wide and have an (optional) provision for a alternator mount.
Note: These are mounting plates only. No other hardware is included.
|
|

625-8536 The GM LS based engine family has already dominated the automotive industry and has quickly become the high performance standard in the performance boating world. Hardin Marine has taken the guess work out of this by developing the most versatile and complete LS Marine engine swap components found anywhere. Making installing a LS in your favorite boat a reality.
The GM LS 1,2,3, and 6 series engines can use this Solid Works/CAD engineered engine rail kit system for the mounting of a GM LS series engine into a popular Jet driven power boat. The engine mounting swap rail Kit is perfect for the boater that wants to make the switch to modern efficient engines.
Manufactured from 6061 T-6 aluminum and CNC machined from 3/8" thick motor mounts are 26" wide and have an (optional) provision for a alternator mount. The engine mounts sit on top of heavy duty 2-1/2" wide aluminum stringer rails, Comes complete with fasteners.
Note: Spun aluminum flywheel cover, PTO adapter are sold separately.
|
|
625-8813 Marine GM LS Engine Rear Mounting Plate
The GM LS based engine family has already dominated the automotive industry and has quickly become the high performance standard in the performance boating world. This bracket make installing a LS in your favorite boat a reality.
The GM LS 1,2,3, and 6 series engines can use these Solid Works/CAD engineered engine mounting bracket. ThIS engine mount IS perfect for the boater that wants to make the switch to modern efficient engines.
Manufactured from 6061 T-6 aluminum and CNC machined from 3/8" thick rear motor mount is 26" wide.
Note: These are mounting plates only. No other hardware is included.
|
|
620-10100 Polished Aluminum LS, Small & Big Block Chevy Bellhousing / Flywheel Cover
This is a fabricated billet style bellhousing traditionally used with plate
style engine mounts. The high quality construction allows attachment of
drive guards and covers. The bolt center to center diagonally across the opening is 6-1/2"
|
|
625-1027 Replacement O-Ring for LS1 - LS3 Thermostatic Cooling System 625-4535. Qty. (4) used in application.
These fit the square ports on the base of the unit against the block, and the internal connection between the top cover and base.
|
|
625-1025 Replacement O-Ring for LS1 - LS3 Thermostatic Cooling System 625-4535. Qty. (2) used in application.
These fit the round ports on the base of the unit against the block.
|
|