755-8644
Hardin Billet Aluminum Flywheel Internal Balance for GM (LS1-LS7)
Ring Gear Tooth Quantity:168-tooth, Rear Main Seal Style:1-piece, Flywheel Material:Aluminum
These precision billet aluminum flywheels deliver all of the strength and reliability that you desire with the light weight and advantages that only aluminum can provide. Lightweight Aluminum alloy flywheels can offer substantial benefits for certain situations such as light weight boats or racing boats that need rapid engine rpms instantaneously. These are recommended as replacements for factory-cast flywheels in high performance and racing applications. They're better for acceleration of heavier race boats. All Hardin flywheels are CNC-machined from certified materials.
- Accepts Mercury HP couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- Bottom Mount Starter Flywheel
- Weight: 12 lbs
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Billet Aluminum Flywheel - Externally Balanced For Gen 4, 5 & 6 Big Block Chevy 454 CID
These all new Keith Eickert billet aluminum flywheels are manufactured from
certified billet material that will not break up under stress and severe
punishment of on and off throttle in high RPM marine environments.
By using a lighter aluminum flywheel you
will be rewarded with both faster acceleration and deceleration giving you the
edge you're looking for.
- Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Lightweight yet durable
- Zero/neutral balance
- 168 tooth gear
- 33 Ounce (Gen 4) and 42.5 Ounce (Gen 5/6) Counterweight options
- Weight: 12 lbs
- Bottom Mount Starter
NOTE: Big block Chevy's flywheel (or flexplate) counterweight balance changed significantly with the introduction of the Gen 5 and 6 engines around 1991 due to the switch to a one-piece rear main seal. This change increased the external balance offset from approximately 33.0 to 42.5 ounce-inches for the Gen 5/6 engines and even shifted to a different spec of 41.7 ounce-inches for some Gen 6 forged cranks.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO ->
External Balance Alum. Flywheel Gen 4,5, & 6 B/B Chevy (Top/Bellhousing
Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- 33 Ounce (Gen 4) and 42.5 Ounce (Gen 5/6) Counterweight options
- Zero/neutral balance • 168 tooth gear
- Weight: 12lbs
NOTE: Big block Chevy's flywheel (or flexplate) counterweight balance changed significantly with the introduction of the Gen 5 and 6 engines around 1991 due to the switch to a one-piece rear main seal. This change increased the external balance offset from approximately 33.0 to 42.5 ounce-inches for the Gen 5/6 engines and even shifted to a different spec of 41.7 ounce-inches for some Gen 6 forged cranks.
|
|
755-8611 Billet Aluminum Flywheel - Externally Balanced For Gen 4, 5 & 6 Big Block Chevy 502 CID
These all new Keith Eickert billet aluminum flywheels are manufactured from
certified billet material that will not break up under stress and severe
punishment of on and off throttle in high RPM marine environments.
By using a lighter aluminum flywheel you
will be rewarded with both faster acceleration and deceleration giving you the
edge you're looking for.
- Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Lightweight yet durable
- Zero/neutral balance
- 168 tooth gear
- Weight: 12 lbs
- Bottom Mount Starter
|
|
755-8609
External Balance Alum. Flywheel Gen 4,5, & 6 B/B Chevy 502 CID (Top/Bellhousing
Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- Weight: 12lbs
|
|
755-8612 Billet Aluminum Flywheel - Neutral Balance For GM Gen 4 Big Block Chevy
These all new Keith Eickert billet aluminum flywheels are manufactured from
certified billet material that will not break up under stress and severe
punishment of on and off throttle in high RPM marine environments.
Attaching
locating tabs that have been installed on the ring gear making rear gear shift
and movement a thing of the past. By using a lighter aluminum flywheel you
will be rewarded with both faster acceleration and deceleration giving you the
edge you're looking for.
- Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Works with bottom mount block mounted starters
- Lightweight yet durable
- Zero/neutral balance
- 168 tooth gear
- Weight: 12 Lbs
- Bottom Mount Starter
|
|
755-8645 Flywheel Aluminum, SBC 86 And Up (1 piece rear main seal, Bottom Mount Starter / Internal Balance 2.067ID. 14-1/4" 168 tooth flywheel. Weight: 12 lbs
|
|
755-8647 Flywheel Aluminum, SBC 86 And Up (1 piece rear main seal, Top Mount Starter / Internal Balance 2.067ID. 14-1/4" 168 tooth flywheel. Weight: 12 lbs
|
|
755-8601 Internal Balance Alum. Flywheel Gen 4,5, & 6 B/B Chevy (Top/Bellhousing Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 12 lbs.
|
|
755-8650 Internal Balance Alum. Flywheel LS 1, 2, 3, 6, 7 Chevy (Top/Bellhousing Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 12 lbs.
|
|
755-8651 Internal Balance Alum. Flywheel LSA/LSX Chevy (Bottom Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 12 lbs
|
|
755-8653 Internal Balance Alum. Flywheel LSA/LSX Chevy (Top Mounted Starter)
These all new billet aluminum flywheels are manufactured from certified
billet material that will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift and
movement a thing of the past. By using a lighter aluminum flywheel, you will be
rewarded with both faster acceleration and deceleration. Giving you the edge
you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Light weight yet durable
- Zero/neutral balance • 168 tooth gear
- 12 lbs.
|
|
755-8643
Hardin Steel Flywheel Internal Balance GM (LS1-LS7)
Ring Gear Tooth Quantity:168-tooth, Rear Main Seal Style:1-piece, Flywheel Material: Steel
These precision steel flywheels deliver all of the strength and reliability that you need in a performance application) Cast flywheels are porous units designed for low rpm truck and industrial applications) Steel provides a shatter free strength that could mean the difference between ripping your boat in half under way. These neutrally balanced units drilled to accept popular Mercruiser high Performance couplers.
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- Zero/neutral balance • 168 tooth gear
- Bottom Mount Starter Flywheel
- Weight: 32 Lbs
|
|
221-1005 Heavy Duty Crashbox Damper Plate
- 13-1/2 outside diameter mounting plate.
- plate is .100 thick.
- smaller bolt pattern: (8) 3/8 holes on 9" bolt circle
- larger bolt pattern: (12) 3/8 holes on 12-5/8 bolt circle
- part is 1-1/2 overall thickness
- 2" x 10 Spline
Heavy Duty damper plate with eight cryo-treated springs and chrome moly backing plate. Built to withstand the extreme HP and torque of today’s high performance engines.
|
|
221-1007 Heavy Duty Mercury 1075 Damper / Drive Plate
New 1075 Mercury HP direct replacement damper plate with dual bolt patterns, eight cryo-treated springs and 26 spline chromoly hub and backing plate. Built to withstand the extreme HP and torque of today’s high performance engines. Replaces OEM # 8M0050119, 842554A1. This will fit both 755-8602 top mount, neutral balanced steel flywheel as well as stock Mercury flywheel
|
|
221-1006 Heavy Duty Mercury 1350 / 1650 Damper / Drive Plate
Direct replacement for the factory Mercury Racing 1350/1650 QC4V Damper plate with a 1.375” shaft that has 26 splines. Heavy duty design with 8 cryo-treated springs and a chromoly backing plate and hub that can withstand significantly more torque than the OEM units. Replaces OEM #8M0058750
|
|
220-96116 High Performance Damper Plate
Heavy Duty - Similar to the standard duty but designed to take the punishment of a high performance engine. 26 Spline.
- Overall Dia.: 13-1/4"
- Spring Housing: 7-1/8"
- Outer Lip: 9-1/2"
- Inner Dia: 1-1/4"
- Spline: 26
- Thickness: 1-1/16"
OEM: Drive Plate Mercury 816618
|
|
220-96115 Standard Duty Damper Plate
Standard Duty - These plates contain damper springs similar to a car clutch
disc. These springs take the shock out of the shift. Not recommended
for high performance applications.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> External Balance Steel Flywheel Gen 4,5 & 6 B/B Chevy (Top/Bellhousing Mount Starter)
These all new steel flywheels are manufactured from certified billet material that will not break up under the stress and severe punishment of on and off throttle in high RPM marine environments.
Attaching locating tabs have been installed on the ring gear making rear gear shift and movement a thing of the past. Giving you the edge you’re looking for.
Billet construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- 33 Ounce (Gen 4) and 42.5 Ounce (Gen 5/6) Counterweight options
- Light weight yet durable
- 168 tooth gear
- Weight: 28 lbs.
NOTE: Big block Chevy's flywheel (or flexplate) counterweight balance changed significantly with the introduction of the Gen 5 and 6 engines around 1991 due to the switch to a one-piece rear main seal. This change increased the external balance offset from approximately 33.0 to 42.5 ounce-inches for the Gen 5/6 engines and even shifted to a different spec of 41.7 ounce-inches for some Gen 6 forged cranks.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Steel Flywheel - External Balance For Gen 4, 5 & 6 Big Block Chevy 454 CID (Bottom Mount Starter)
These all new steel flywheels will not break up under the stress and severe punishment of
on and off throttle in high RPM marine environments.
Attaching
locating tabs have been installed on the ring gear making rear gear shift
and movement a thing of the past. Giving you the edge you’re looking for.
- Steel construction
- Accepts Mercury couplers and heavy duty drive plates
- Multi-point ring gear attachment
- 33 Ounce (Gen 4) and 42.5 Ounce (Gen 5/6) Counterweight options
- 168 tooth gear
- Weight: 32 lbs
NOTE: Big block Chevy's flywheel (or flexplate) counterweight balance changed significantly with the introduction of the Gen 5 and 6 engines around 1991 due to the switch to a one-piece rear main seal. This change increased the external balance offset from approximately 33.0 to 42.5 ounce-inches for the Gen 5/6 engines and even shifted to a different spec of 41.7 ounce-inches for some Gen 6 forged cranks.
|
|