Flame Arrestor Ram Airflow Air Intake Enhancer
Holley or Demon Without Choke Tower

We have all probably seen many claims for horsepower gains from simple devices. But unlike most of them, this actually does what it claims it does. It actually works engine dyno tests proved time and time again this simple power adding device on several different engines at different dyno shops showed no less than a 7 HP gain with as much as 10 HP on some combinations. It works on a very simple principle. It allows the air to flow more efficiently into the carburetor. By directing the air flows current path downward into the carburetor the more power your engine will make. Without the Ram Airflo, the air rushing in from the outer diameter of the flame arrestor collides in the center which slows down the airspeed. The Ram Airflo allows the air to make a clean direct shot down into the carburetor thus producing more power. Each unit Adjust for heights from 3.3" to 6.4".

Industry News:

Professional Products AirFlo is awarded the National Street Machine Club "Garage Tested" Seal of Approval!!!

The National Street Machine Club is a national organization of 204,000 members. The club has their own magazine titled Street Thunder. The "Garage Tested" program is set up by the club to allow manufacturers like Professional Products to provide actual parts to a select group of club members to test in real world use conditions. Professional Products opted to send out forty of our AirFlo devices. We asked the club to try to get these to members who raced their cars so we could get some actual race results. And where possible, we asked to have the members do back to back runs at the dragstrip before installing the AirFlo and after. The members are asked to score the product on a scale of 1 to10 on several criteria. Here's how we scored based on responses from club users.

This is four of eleven different criteria:

Ease of Use - 9.8
Durability - 8.1
Design - 9.1
Performance - 7.8

Overall average score on 11 different criteria was 8.0 and was given an approval rating by 100% of the users thus earning the product the club's Seal of Approval. Here are a couple of comments from users: Jake Stokes from Marysville, OH - "We used the Air- Flo on our local track and I was amazed by its performance." Jana Owen from Haltern City, TX said - "I would recommend the AirFlo for its ability to help the engine breathe easier leading to an increase in horsepower, response and mpg."

Flame Arrestor Ram Airflow Air Intake Enhancer
Holley With Choke Tower

We have all probably seen many claims for horsepower gains from simple devices. But unlike most of them, this actually does what it claims it does. It actually works, engine dyno tests proved time and time again this simple power adding device on several different engines at different dyno shops showed no less than a 7 HP gain with as much as 10 HP on some combinations. It works on a very simple principle. It allows the air to flow more efficiently into the carburetor. By directing the air flows current path downward into the carburetor the more power your engine will make. Without the Ram Airflo, the air rushing in from the outer diameter of the flame arrestor collides in the center which slows down the airspeed. The Ram Airflo allows the air to make a clean direct shot down into the carburetor thus producing more power. Each unit Adjust for heights from 3.3" to 6.4".

Industry News:

Professional Products AirFlo is awarded the National Street Machine Club "Garage Tested" Seal of Approval!!!

The National Street Machine Club is a national organization of 204,000 members. The club has their own magazine titled Street Thunder. The "Garage Tested" program is set up by the club to allow manufacturers like Professional Products to provide actual parts to a select group of club members to test in real world use conditions. Professional Products opted to send out forty of our AirFlo devices. We asked the club to try to get these to members who raced their cars so we could get some actual race results. And where possible, we asked to have the members do back to back runs at the dragstrip before installing the AirFlo and after. The members are asked to score the product on a scale of 1 to10 on several criteria. Here's how we scored based on responses from club users.

This is four of eleven different criteria:

Ease of Use - 9.8
Durability - 8.1
Design - 9.1
Performance - 7.8

Overall average score on 11 different criteria was 8.0 and was given an approval rating by 100% of the users thus earning the product the club's Seal of Approval. Here are a couple of comments from users: Jake Stokes from Marysville, OH - "We used the Air- Flo on our local track and I was amazed by its performance." Jana Owen from Haltern City, TX said - "I would recommend the AirFlo for its ability to help the engine breathe easier leading to an increase in horsepower, response and mpg."

Flame Arrestor Ram Airflow Air Intake Enhancer
Demon With Choke Tower

We have all probably seen many claims for horsepower gains from simple devices. But unlike most of them, this actually does what it claims it does. It actually works, engine dyno tests proved time and time again this simple power adding device on several different engines at different dyno shops showed no less than a 7 HP gain with as much as 10 HP on some combinations. It works on a very simple principle. It allows the air to flow more efficiently into the carburetor. By directing the air flows current path downward into the carburetor the more power your engine will make. Without the Ram Airflo, the air rushing in from the outer diameter of the flame arrestor collides in the center which slows down the airspeed. The Ram Airflo allows the air to make a clean direct shot down into the carburetor thus producing more power. Each unit Adjust for heights from 3.3" to 6.4".

Industry News:

Professional Products AirFlo is awarded the National Street Machine Club "Garage Tested" Seal of Approval!!!

The National Street Machine Club is a national organization of 204,000 members. The club has their own magazine titled Street Thunder. The "Garage Tested" program is set up by the club to allow manufacturers like Professional Products to provide actual parts to a select group of club members to test in real world use conditions. Professional Products opted to send out forty of our AirFlo devices. We asked the club to try to get these to members who raced their cars so we could get some actual race results. And where possible, we asked to have the members do back to back runs at the dragstrip before installing the AirFlo and after. The members are asked to score the product on a scale of 1 to10 on several criteria. Here's how we scored based on responses from club users.

This is four of eleven different criteria:

Ease of Use - 9.8
Durability - 8.1
Design - 9.1
Performance - 7.8

Overall average score on 11 different criteria was 8.0 and was given an approval rating by 100% of the users thus earning the product the club's Seal of Approval. Here are a couple of comments from users: Jake Stokes from Marysville, OH - "We used the Air- Flo on our local track and I was amazed by its performance." Jana Owen from Haltern City, TX said - "I would recommend the AirFlo for its ability to help the engine breathe easier leading to an increase in horsepower, response and mpg."