Heim End 1/4-28, 43C Cable Applications

These rod ends are constructed of high grade stainless steel to withstand theabusive marine environment Never use non-stainless rod ends - they corrode andfail when you least expect it.

33C Cable Heim End - 10-32 Thread

These heim ends are used in severe duty and racing applications. This heim end is designed to be threaded on the end of a 33C cable and bolt to the mounting location on the carburetor.

Stainless Steel 1/2 Braided Line Kit For Hydraulic Place Diverter

Place Diverter braided line kit features custom braided line on the outside of the boat only Uses your stock plastic lines inside.

Stainless Full Braided Line Kit for Hydraulic Place Diverter

CP Performance has come up with the ultimate hydraulic line kit Features all stainless steel fittings and braided line from the hydraulic cylinder to the pump.

Hydraulic Place Diverter System for Berkeley 12JC, JG, JB & American Turbine

This kit provides the freedom of instant control with the flip of a switch This unit travels its full range in approximately 2 seconds, and due to its hydraulic operation it is infinitely adjustable Each kit comes complete with a hydraulic diverter assembly, hydraulic pump, wiring harness, switch, and all necessary hydraulic fittings and lines.

Place Diverter Replacement Inner Teflon O-Ring

This is the Inner Teflon O-ring that provides the sealing on a Place Diverter Trim Nozzle. These should be changed periodically to maintain peak performance.

Low-Profile Place Diverter Berkeley System for 12JC, JG, JB

This system was designed to solve the problem that occurs in limited clearance applications such as swim step interference By eliminating the vertical loop in the reverse cable and re-routing the cable in a horizontal S shape out of the transom.

Manually Controlled Place Diverter Kit for Berkeley 12JC, JG, JB, American Turbine

These complete manually controlled Place diverter kits come with everything you need to make this installation a snap Each kit includes a manual Place diverter, a 7-position manual control floor mount or stringer mount, your choice when ordering and a heavy duty control cable. (specify length when ordering)

Place Diverter Nozzle Inserts

Through years of research we found the 3-1/8" nozzle to be, by far, the most effective size for most jet boats with big block Chevy, Ford or Oldsmobile. In some cases, larger and heavier jet boats might require a little larger size 3-1/4". Your diverter must be machined for the inserts. Stock Place Diverters will not be machined for these inserts.

Place Diverter Replacement Nozzle O-Ring

This is the Teflon nozzle O-ring that provides sealing on a Place Diverter Trim nozzle. These should be changed periodically to maintain peak performance.

Diode Kit Only

For Optional Steering Wheel Mounted Trim Switch.

Place Diverter version of the Berkeley Droop Snoot

Offers advanced engineering and versatility by lowering the thrust point of the diverter. Shown with optional ride plate that is available separately.

Heavy Duty Manual Place Diverter Control - Black Floor Mount, 7-Position Control

Each of these heavy duty controls feature a solid cast aluminum construction with a unique 7-position positive detent lock so you know when you adjust your Place diverter to where you want it it's going to stay there Each unit features a 2 to 1 leverage ratio allowing fast, smooth, effortless operation.

HPH Place Diverter High Performance Droop Nozzle Housing Kit

A flow chamber designed to deliver maximum hole-shot and top end performance. A great way to gain 3.5 degrees of up angle in your nozzle and lower the thrust point of water flow 1/2". Lowering the thrust point of water will increase bow lift resulting in less drag. Includes gaskets, bushings, and mounting bolts.

Place Diverter Manual Diverter To Hydraulic Diverter Conversion Kit

So you have a manual Place Diverter kit and you would like it to be a hydraulic kit? No Problem! With this simple kit you get all the necessary components to make an effortless change.

Place Diverter Replacement Hydraulic Pump

Are you in need of a replacement hydraulic Place Diverter pump? We've got them Restore your diverter to it's fast operating original condition with a new pump.

Place Diverter Hydraulic Ram Heim End

These heim ends are used in severe duty and racing applications. This heim end is designed to be threaded on the end of the hydraulic ram on a hydraulically operated Place Diverter.

Manually Controlled Place Diverter Kit for Berkeley E Pump

These complete manually controlled Place diverter kits come with everything you need to make this installation a snap Each kit includes a manual Place diverter, a 7-position manual control floor mount or stringer mount, your choice when ordering and a heavy duty control cable. (specify length when ordering )