See us on:
Visit CP on Facebook Visit CP on Twitter Visit CP on YouTube
Is your boat in the gallery?
Image Gallery  
Instructions & Guides:
Instructions  
Find Parts by Mercury Model:
OEM Part Finder  
What's on sale today?
Sale Specials  
What are you looking for Today?

Need Help? Call Us:

1-800-225-9871

Outside the USA? Call 707-585-9871

Deck & Dash Hardware - IMCO Marine

1-Piece Aerospace Alloy Prop Shaft
Your Price:
$399.99

1-Piece Aerospace Alloy Prop Shaft

421-BRV-125

1-Piece Aerospace Alloy Prop Shaft

34.5" Bravo Tie Bar
Your Price:
$375.00

34.5" Bravo Tie Bar

615-4119

34.5" Bravo Tie Bar

  • Available: (1) One
  • 304 Stainless IMCO Brand

3-port Superflow Fuel Selector Valve
Your Price:
$529.99

3-port Superflow Fuel Selector Valve

421-SF-20

3-port Superflow Fuel Selector Valve

This electric fuel valve has high capacity flow, 250 gallons per hour and a 400 pound maximum operating pressure Designed with a brass ball valve construction and a 1/2" thru-hole for non restricted flow This valve has an automatic "switch-over" switch built-in for fuel tanks sending unit The mechanical switch makes it easy in case of electrical failure This unit measures 2" deep x 4" tall x 12-3/4" long with 1/2" NPT This is also available as a 6 port with fuel returns perfect for fuel injected motors.


6-port Superflow Fuel Selector Valve With Fuel Returns
Your Price:
$679.99

6-port Superflow Fuel Selector Valve With Fuel Returns

421-SF-206

6-port Superflow Fuel Selector Valve With Fuel Returns

This electric fuel valve has high capacity flow, 250 gallons per hour and a 400 pound maximum operating pressure Designed with a brass ball valve construction and a 1/2" thru-hole for non restricted flow This valve has an automatic "switch-over" switch built-in for fuel tanks sending unit The mechanical switch makes it easy in case of electrical failure This unit measures 2" deep x 4" tall x 12-3/4" long with 1/2" NPT This is also available as a 6 port with fuel returns perfect for fuel injected motors.


8" Flat Bottom Style Tank Bracket
Your Price:
$39.99

8" Flat Bottom Style Tank Bracket

421-280202

8" Flat Bottom Style Tank Bracket (each)

These are heavy gauge steel brackets that have been vinyl dipped to provide a non slippery hold on the fuel tank without marring the finish These brackets are available in two sizes. Bolt hole center to center is 4".


8-1/2" Flat Bottom Style Tank Bracket
Your Price:
$39.99

8-1/2" Flat Bottom Style Tank Bracket

421-280203

8-1/2" Flat Bottom Style Tank Bracket (each)

These are heavy gauge steel brackets that have been vinyl dipped to provide a non slippery hold on the fuel tank without marring the finish These brackets are available in two sizes. Bolt hole center to center is 4".


Adjustable Engine Mount Kit - Black
Your Price:
$289.99

Adjustable Engine Mount Kit - Black

421-04-2294KB

Adjustable Engine Mount Kit - Black

Easier and stronger, IMCO's new complete motor mounting system is fully adjustable (height and width) for 25" to 30" stringers. Compact size allows easy access to hoses, oil coolers, water pumps, wiring and other hardware. All parts are pre-fabricated and ready to mount. Adjustable hardware is all stainless steel. Block mounts and stringer mounts are 356 aluminum heat treated to T6 hardness for maximum strength. Sold as Pair.


Adjustable Engine Mount Kit - Polished
Your Price:
$424.99

Adjustable Engine Mount Kit - Polished

421-04-2294KP

Adjustable Engine Mount Kit - Polished

Easier and stronger, IMCO's new complete motor mounting system is fully adjustable (height and width) for 25" to 30" stringers. Compact size allows easy access to hoses, oil coolers, water pumps, wiring and other hardware. All parts are pre-fabricated and ready to mount. Adjustable hardware is all stainless steel. Block mounts and stringer mounts are 356 aluminum heat treated to T6 hardness for maximum strength.


Alpha Dual Drive Dual Ram Power Steering - Narrow

Your Price:
$3,469.99

This Part has options, please click the button below to order.

Alpha Dual Drive Dual Ram Power Steering - Narrow

421-SA-28R

Dual Ram Power Steering for Dual Alpha Applications 9" Narrow Mount

The IMCO Standard Dual Ram Power Steering System is intended for Dual Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a dual ram steering system in approximately six hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK11, Brazilian manifold style, 1994 and later
421-HK-9, Saginaw fitting style, 1994 and earlier.

Alpha Dual Ram Power Steering - Narrow

Your Price:
$3,279.99

This Part has options, please click the button below to order.

Alpha Dual Ram Power Steering - Narrow

421-SA-26R

Dual Ram Power Steering for Alpha Applications 9" Narrow Mount

The IMCO Standard Dual Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a dual ram steering system in approximately five hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK11, Brazilian manifold style, 1994 and later
421-HK-9, Saginaw fitting style, 1994 and earlier.

Alpha Dual Ram Power Steering - Standard

Your Price:
$3,089.99

This Part has options, please click the button below to order.

Alpha Dual Ram Power Steering - Standard

421-SA-25

Dual Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Dual Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a dual ram steering system in approximately five hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK11, Brazilian manifold style, 1994 and later
421-HK-9, Saginaw fitting style, 1994 and earlier.

Alpha Single Ram Power Steering - Narrow

Your Price:
$1,849.99

This Part has options, please click the button below to order.

Alpha Single Ram Power Steering - Narrow

421-SA-26R

Single Ram Power Steering for Alpha Applications 9" Narrow Mount

The IMCO Standard Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds. This kit has a narrower mount for applications with limited horizontal clearance.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK11, Brazilian manifold style, 1994 and later
421-HK-9, Saginaw fitting style, 1994 and earlier.

Alpha Single Ram Power Steering - Standard

Your Price:
$1,749.99

This Part has options, please click the button below to order.

Alpha Single Ram Power Steering - Standard

421-SA-26

Standard Single Ram Power Steering for Alpha Applications 10.5" Standard Mount

The IMCO Standard Single Ram Power Steering System is intended for Alpha powered recreational performance sport boats. The system consists of through-transom hydraulic port bracketry with all necessary hose, fittings, fasteners, aluminum drive end caps and stainless braided line Once installed, boat drivers will experience significantly more precise steering control, especially at higher speeds.

Do it yourself. Install a single ram steering system in approximately four hours or less.

Note: These kits contain non-assembled rubber hoses and brass fittings. See steering component section for stainless steel braided line options.

Requires Installation Kit:

421-HK11, Brazilian manifold style, 1994 and later
421-HK-9, Saginaw fitting style, 1994 and earlier.

Alternator/Power Steering Bracket
Your Price:
$149.99

Alternator/Power Steering Bracket

421-PFB90

Alternator/Power Steering Bracket

Designed for Bravo applications to allow clearance of Big Block Powerflow exhaust manifolds Allows for the use of all stock belts and power steering hoses in most applications.


2- Groove Billet Crankshaft Pulley For Big Block Chevy
Your Price:
$78.99

Big Block Chevy 2-Groove Billet Crankshaft Pulley

421-843

2-Groove Billet Crankshaft Pulley For Big Block Chevy

  • Machined from 6061-T6 billet aluminum. 
  • Set up for a Mercury replacement with deeper v-groove. 
  • Comes highly polished.
  • Diameter of 6.5"

Big Block Chevy Polished Aluminum Timing Cover
Your Price:
$69.99

Big Block Chevy Polished Aluminum Timing Cover

421-054

Big Block Chevy Polished Aluminum Timing Cover - Without Pump Drive Hole

These beautifully polished cast aluminum timing covers are perfect for any performance engine. Each cover is CNC machined to provide an excellent seal and their rigid construction assures your camshaft stays where it should.


Big Block Chevy Polished Aluminum Timing Cover - Gen 5
Your Price:
$129.99

Big Block Chevy Polished Aluminum Timing Cover - Gen 5

421-053

Big Block Chevy Polished Aluminum Timing Cover - Gen 5 Without Pump Drive Hole
(Use Gasket #300-17872 & seal #300-16872)

These beautifully polished cast aluminum timing covers are perfect for anyperformance engine. Each cover is CNC machined to provide an excellentseal and their rigid construction assures your camshaft stays where it should.


Big Block Chevy Polished Aluminum Timing Cover - Gen 6
Your Price:
$129.99

Big Block Chevy Polished Aluminum Timing Cover - Gen 6

421-052

Big Block Chevy Polished Aluminum Timing Cover - Gen 6 Without Pump Drive Hole (Use Seal #300-16872)

These beautifully polished cast aluminum timing covers are perfect for any performance engine. Each cover is CNC machined to provide an excellent seal and their rigid construction assures your camshaft stays where it should. Does not fit Double Roller Timing Chains. Back utilizes O ring seal.


Big Block Chevy Polished Aluminum Timing Cover - Gen 6
Your Price:
$155.99

Big Block Chevy Polished Aluminum Timing Cover - Gen 6 - Double Roller

421-051

Big Block Chevy Polished Aluminum Timing Cover - Gen 6 Without Pump Drive Hole (Use Seal #300-16872) - Double Roller Compatible

These beautifully polished cast aluminum timing covers are perfect for any performance engine. Each cover is CNC machined to provide an excellent seal and their rigid construction assures your camshaft stays where it should. This model will fit Double Roller Timing Chains.


Billet Serpentine Pulley Kit
Your Price:
$699.99

Billet 454/502 Mercury Serpentine Pulley Kit

421-301K

Billet 454/502 Mercury Serpentine Pulley Kit

This kit comes with:

  • 1 - Crankshaft pulley
  • 1 - Circulating pump pulley
  • 1 - Sea pump pulley
  • 1 - Power steering pulley
  • 1 - Alternator pulley
  • 1 - Idler pulley

All pulleys are CNC machined and highly polished.
NOTE: This kit will not retrofit V-Belt Pulley Systems to Serpentine. It is to replace existing Serpentine setups only!