See us on:
Visit CP on Facebook Visit CP on Twitter Visit CP on YouTube
Is your boat in the gallery?
Image Gallery  
Instructions & Guides:
Instructions  
Find Parts by Mercury Model:
OEM Part Finder  
What's on sale today?
Sale Specials  
What are you looking for Today?

Need Help? Call Us:

1-800-225-9871

Outside the USA? Call 707-585-9871

Livorsi Marine

We carry a full line of Livorsi Marine Gauges, including GPS Speedometer Kits, 5 Gauge Kits, and many other Livorsi Gauges and all the senders needed to use them. We also carry Livorsi Shifters and Controls. We also carry many accessories such as hatch actuators and LED Cup Holders!



Featured Products:

1/8

1/8" NPT Female to 1/4" Male Push-on Hose Speedometer Fitting

1/8" NPT Female to 1/4" Male Push-on Hose Speedometer Fitting

Used on Speedometers to attach hose to back of gauge. This or the 1/8" version is required on all new Autometer Pitot Operated Speedometers.
Your Price: $2.99 
Part Number: 730-GCF4

1/8

1/8" NPT Female to 1/8" Male Push-on Hose Speedometer Fitting

1/8" NPT Female to 1/8" Male Push-on Hose Speedometer Fitting

Used on Speedometers to attach hose to back of gauge. This or the 1/4" version is required on all new Autometer Pitot Operated Speedometers.
Your Price: $2.99 
Part Number: 730-GCSF1/8

12 Inch Electric Hatch Actuator

12 Inch Electric Hatch Actuator

  • 12" Stroke.
  • Overall Length Closed is 19-7/8".
  • Strong eyelet mount allows a wide range of angles for easy installation.
  • Highly polished stainless steel tube offers a beautiful appearance and the very best in corrosion resistance.
  • Sealed precision die cast housing.
  • A 12-volt severe duty motor offers excellent load capacity and reliability.
  • 400 LB maximum load capacity.
Your Price: $346.99 
Part Number: 730-SSA12

13

13" Isotta Carbon Fiber Steering Wheel

  • 13" diameter wheel.
  • Carbon Fiber.
  • Includes Hub for 3/4" tapered shaft.
  • Made in Italy.
Your Price: $190.99 
Part Number: 730-ISWK13CFBK

2-5/8

2-5/8" Water Flow Gauge Kits

2-5/8" Water Flow Gauge Kits

The Raw Water Flow system is a new patented system that indicates your engine’s water flow volume. This system warns you of a potential problem or danger that would otherwise not be indicated by a water pressure gauge alone, thus preventing cosmetic and structural damage to expensive exhaust headers, intercoolers and other cooling systems. Water flow is a real indication of water surging through a cooling system such as: exhaust headers, sea strainers, impellers, Gen sets, intercoolers and any other marine or industrial applications that utilize water flow. Don’t confuse water flow with water pressure; as many OEM engine manufacturers measure water pressure in different areas of the motor. This number may not be telling you the real story of water flow. Your water pressure can be constant from the first day you bought your new boat. The danger may be lurking in the water flow which could be caused by:
  •     A plugged heat exchanger
  •     Extensive debris build-up in the intercooler or sea strainer
  •     A kinked hose
  •     Worn impeller
  •     Water pickups not collecting enough water for cooling system
These may be the culprits causing the good water pressure reading, when in actuality there is poor water flow. Low water flow results in; cosmetic and structural damage to expensive exhaust headers caused by burned impellers and/or the clogging and damage of intercoolers or strainers. Calibration is set at idle and at wide open throttle (WOT). This will generate the cooling system’s normal operating range. When water flow rises or drops more than 20% from that range (regardless of RPM), it will trip the alarm illuminating the built-in LED light; an optional audible alarm may be added. Pick the size of the hose and mount the Tee in-line on the output side of a sea strainer or sea pump. The paddle wheel sensor installs in the Tee and can be easily removed for inspection. The Raw Water Flow system consists of:
  • 2 5/8” panel mounted gauge with internal warning light
  • Bronze Tee
  • PCB board
  • Harness
  • Paddlewheel transducer
    Your Price: $432.99 
    Part Number: 730-WFG

    Adjustable Position LED Indicators

    Adjustable Position LED Indicators

    Adjustable LED Indicators can be applied to a wide range of applications:
    Tabs • Drives • Jackplates • Rudder indicators • Water level • Fuel Level

    These state-of-the-art indicators by Livorsi Marine, Inc. are capable of reading CAN Bus protocols such as SmartCraft® (with Gateway), NMEA 2000® and J1939, as well as 0-5 volt or resistive-type (ohms) inputs. The technology used for these indicators can be applied to a wide range of applications such as trim tabs, drives, jackplates, rudder indicators, water level, or fuel level.

    The LED position indicators eliminate the need for mechanical 33C cables which are typically used for drive and tab indication. These cables have a tendency to deteriorate, will fail over time, and are inaccurate due to lost cable motion. With the Adjustable Position LED indicators, mechanical cables are replaced by more reliable network wiring that allows 'plug n play' connectivity into existing tab or drive position sensors.

    If you do not have drive trim or tab sensors, we have the solution. For applications or retrofits that do not have electronic position sensors, Livorsi can provide you with a mechanical to electronic converter solution so that you may take advantage of the accuracy and benefits of Livorsi's LED Indicators.

    What sets these displays apart from anything else is the single middle green LED. During calibration, this LED display can be set to indicate 50% of actuator travel, fuel level or whatever you are monitoring. What makes it so special is that it allows you to establish the optimum running angle - or sweet spot (not at 50%), to dial-in the vessel for optimal running efficiency so the novice boater always runs at the correct trim.

    No matter what information you are looking to display (fuel level, drive trim, tab position, etc.), the data is brought into the communication network (Rx) with 'plug n play' harnessing and is received via the network cable to the LED indicator for display. The LED indicator can also transmit (Tx) this information via CAN bus to other compatible displays such as Garmin, Lowrance or Raymarine via NMEA 2000®, SmartCraft® (with Gateway) or J1939 protocols. If your boat is already transmitting (Tx) NMEA 2000® data (tabs, drives, fuel level, water level, rudder angle, etc.), simply plug the indicator into the NMEA 2000® backbone to begin displaying the desired feature on the indicator.

    The super bright LED's can be seen in direct sunlight even with polarized sunglasses. With a range of 250 brightness intensity levels, you are guaranteed the best view possible, day or night. We accomplish this with the use of an ambient light sensor which provides automatic adjustment of the LED brightness according to available light conditions.

    Setup of the indicator is performed via the proximity/ambient light sensor located on the front of the unit. Simple to follow and easy to use step-by-step instructions are included to ensure installation and setup is a snap.

    By setting the 'running point', the indicator can more accurately track the entire range of operation, giving more resolution than if only a high and low point were known.

    In order for these new indicators to function, there must be either an electronic sender to transmit the signal, or a mechanical to electrical device to convert the mechanical operation into an electronic voltage or resistance, which will ‘feed’ the signal to the indicator. Many of today’s tabs, drives, jackplates, fuel or water tanks, or rudders already have a sender on it. These versatile indicators can be used with a wide variety of senders such as voltage, resistance, or CAN bus NMEA 2000®, SmartCraft® or SAEJ1939 protocols. We have many ideas to adapt senders for these devices. Let us know your situation, and we will determine the best solution for your application.

    The type of sender used whether voltage, resistance, or CAN bus must be known at the time of order with respect to how the indicator will be programmed to read the type of connection used.

    BECAUSE OF THE ADVANCED NATURE OF THESE INDICATORS, THEY CANNOT BE ORDERED ONLINE. PLEASE CALL US TO RECEIVE A QUOTE.

    WE WILL NEED A COMPLETED BUILD SHEET WHICH YOU CAN OBTAIN HERE: BUILD SHEET

    Your Price: $0.00 
    Part Number: 730-ALEDI

    Cigarette Lighter Bezel

    Cigarette Lighter Bezel

    Cigarette Lighter Bezel

    Powdercoated bezel for cigarette lighter. 7/8" I.D, 1-3/8" O.D
    Your Price: $8.99 
    Part Number: 730-FL78

    Deutsch Connector for Livorsi Gauges

    Deutsch Connector for Livorsi Gauges

    4 Pin Connector & Wire Harness 18 inch

    The Plug-In Connector feature which makes Livorsi's new Deutch gaugesuniquemake installation a breeze, saving you a lot of rigging time &frustration.

    NOTE: Connectors sold separately from gauges. Most Livorsi Gauges except GPS Speedos and Mechanical Gauges will require this connector!

    Your Price: $6.99 
    Part Number: 730-DCH

    Dock Line 1/2

    Dock Line 1/2"

    Dock Line 1/2"
    • Oversized Loops
    • Made of Water resistant polyprolene
    • Extremely Flexible & Resists Knotting
    • Will not Mildew
    • Floats
    • Available in 15 and 20 foot lengths
    Your Price: $25.99 
    Part Number: 730-DL12

    Dock Line 5/8

    Dock Line 5/8"

    Dock Line 5/8"
    • Oversized Loops
    • Made of Water resistant polyprolene
    • Extremely Flexible & Resists Knotting
    • Will not Mildew
    • Floats
    • Available in 15 and 20 foot lengths
    Your Price: $43.99 
    Part Number: 730-DL58

    LED Lighted Cup Holder

    LED Lighted Cup Holder

    LED Lighted Beverage Holders

    Light up the night, or at least your drink with these lighted beverage holders! Available in Blue, Red, Amber, White and Green!
    • Fits: cans, bottles and kuzis
    • Stainless steel rim
    • 3/8” drain fitting
    • 12” harness to hook up to boats electrical system
    • 3-1/2" cutout, 4-3/4" overall width
    Your Price: $31.99 
    Part Number: 730-LBH

    LED Pop-up Bow Light Cup

    LED Pop-up Bow Light Cup

    LED Pop-up Bow Light Cup

    For use with 730-LEDPUBL.

    Your Price: $11.99 
    Part Number: 730-LEDPUBLWC

    Livorsi Control Bezels

    Livorsi Control Bezels

    Livorsi Control Bezels

    Powdercoated bezels for use with Livorsi Controls. 8-1/4" Long.
    Your Price: $72.99 
    Part Number: 730-TB

    Livorsi Diesel Tachometer Gauge Mega & Race Rim 3-3/8

    Livorsi Diesel Tachometer Gauge Mega & Race Rim 3-3/8"

    Livorsi 3-3/8" Mega or Race Series 0-4000 RPM Diesel Tachometer with Plug-In Connectors

    Livorsi Marine's brand new line of performance gauges featuring the new Mega& Race Rims with Plug-In Connectors.  This new series is a whole new familyof gauges from 2" to 5" that you can mix & match to create a custom look.

    Livorsi Marine gauges are now easier than ever to install!  The Plug-Infeature on these instruments significantly decreases rigging time.  Theplug-in connectors are waterproof and resist salt corrosion.  Gauges areencased in all non-ferrous hardware.  These gauges include state-of-the-artL.E.D. lighting, for easy viewing in low light conditions.

    These gauges feature newly designed rims.  The Mega rim has a boldstrong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operatingyour boat.  The Race rim has a sleek look, that make your gauges standout.

    Overall gauge width is 3-3/4" and dash cutout size is 3-3/8".

    ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 5-7 DAYS

    Your Price: $186.99 
    Part Number: 730-DC4000

    Livorsi Industrial Series Five Gauge Kits

    Livorsi Industrial Series Five Gauge Set

    Livorsi Industrial Series Five Gauge Kits

    We've decided to take some of the guess work our of your next gauge setpurchase. By combining the five most popular gauges we are able to offer you thevery best gauges at the very best value. The industrial series gauges are only available in the Standard size. The Industrial Series is characterized by the SAE Rim.

    Gauge sets include:

    • 3-3/8" 6000 RPM Tachometer
    • 2-1/16" Oil Pressure
    • 2-1/16" Water Temperature
    • 2-1/16" Fuel Level
    • 2-1/16" Voltmeter

    Note:  Plug-In Connectors are sold separately.

    ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 5-7 DAYS

    These gauges are available with a WHITE or BLACK face, and WHITE, BLACK or STAINLESS STEEL rims.

    Your Price: $369.99 
    Part Number: 730-4002

    Industrial Series GPS Speedometer 3-3/8

    Livorsi Industrial Series GPS Speedometer Gauge 3-3/8"

    Industrial Series GPS Speedometer Gauge 3-3/8"

    The Livorsi Industrial Series Gauges have a bold and classic look.

    • GPS satellite guided analog speedometer
    • Provides accuracy with no needle bounce
    • No pitot tube needed
    • Memory recall retains highest speed
    • Accurate readings on stepped or ventilated bottoms
    • Connects to the output of some GPS antenna/receivers
    • Available in 3 3/8"
    • Choose gauge/harness only or full kit
    • Kits include speedometer, compact antenna/receiver, memory recall and harness
    • Click here to see a comparison on rim types
    • Overall gauge width is 3-3/4" and dash cutout size is 3-3/8"
    Your Price: $221.99 
    Part Number: 730-GPSS

    Livorsi Mega Series Five Gauge Standard  Set

    Livorsi Mega Series Five Gauge Standard Set

    Livorsi Marine Mega Rim Series Five Gauge Kits

    We've decided to take some of the guess work our of your next gauge set purchase. By combining the five most popular gauges we are able to offer you the very best gauges at the very best value.

    Standard Gauge sets include:

    • 3-3/8" 6000 RPM Tachometer
    • 2-1/16" Oil Pressure
    • 2-1/16" Water Temperature
    • 2-1/16" Fuel Level
    • 2-1/16" Voltmeter

    Note:  Plug-In Connectors are sold separately.

    ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 5-7 DAYS

    Livorsi Gauges are available in many color combinations, under the face color below, please choose a rim color to add this item to your cart.

    Your Price: $379.99 
    Part Number: 730-200

    Livorsi 3-3/8

    Livorsi Tachometer Gauge Industrial Series 3-3/8"

    Livorsi 3-3/8" Industrial Series 6k, 8k, 10k or 12k RPM Tachometer with Plug-In Connectors

    Livorsi Marine's brand new line of Industrial Series gauges featuring SAE Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 3-3/8" that you can mix & match to create a custom look. These gauges feature SAE stepped rims. Click here to see a comparison on rim types.

    Livorsi Marine gauges are now easier than ever to install!  The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion.  All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Industrial Series gauges are only available in Standard sizes.

    Overall gauge width is 3-3/4" and dash cutout size is 3-3/8"

    NOTE:  Required DCH connectors are sold separately and will be added to your order along with the gauge.

    ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 5-7 DAYS

    Your Price: $184.99 
    Part Number: 730-DCS

    Livorsi 3-3/8

    Livorsi Tachometer Gauge Mega & Race Rim 3-3/8"

    Livorsi 3-3/8" Mega or Race Series 6k, 8k, 10k or 12k RPM Tachometer with Plug-In Connectors

    Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims.  The Mega rim has a bold strong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat.  The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.

    Livorsi Marine gauges are now easier than ever to install!  The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion.  All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes.  Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs!  Create the look you want, with the gauges you want.

    Overall gauge width is 3-3/4" and dash cutout size is 3-3/8"

    NOTE:  Required DCH connectors are sold separately and will be added to your order along with the gauge.

    ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 5-7 DAYS

    Your Price: $195.99 
    Part Number: 730-DCS

    Livorsi 3-3/8

    Livorsi Tachometer Gauge Mega & Race Rim 4-5/8"

    Livorsi 4-5/8" Mega or Race Series 6k, 8k or 10k RPM Tachometer with Plug-In Connectors

    Livorsi Marine's brand new line of performance gauges featuring the new Mega& Race Rims with Plug-In Connectors.  This new series is a whole new familyof gauges from 2" to 5" that you can mix & match to create a custom look.

    Livorsi Marine gauges are now easier than ever to install!  The Plug-Infeature on these instruments significantly decreases rigging time.  Theplug-in connectors are waterproof and resist salt corrosion.  Gauges areencased in all non-ferrous hardware.  These gauges include state-of-the-artL.E.D. lighting, for easy viewing in low light conditions.

    These gauges feature newly designed rims.  The Mega rim has a boldstrong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operatingyour boat.  The Race rim has a sleek look, that make your gauges standout.

    Mega & Race gauges are available in Standard or Monster sizes.  Havefreedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or4-5/8" speedos and tachs!  Create the look you want, with the gauges youwant.

    Overall gauge width is 5" and dash cutout size is 4-5/8".

    Note: Connectors Sold Separately!

    ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 5-7 DAYS

    Your Price: $219.99 
    Part Number: 730-DCL

    Page:1 2 3 4 … 8  Move Next