Now In: Welcome to CP Performance

| Checkout our hottest specials! |
 |
Standard Straight Cut Exhaust Tip
4" Diameter Standard Length with Internal Flapper
These popular straight end tips share the same great
construction and gleaming finish as our angle cut tips but with
a straight style end These tips include flaps and will accept
our popular slip-in silencers on the 4" models These tips will
also accept external Salisbury flappers. Sold Each.
| Dimensions: |
| Length Overall |
8-3/4" |
| Flange To Inside End |
5" |
| Flange To Outside End |
3-3/4"" |
Regular Price: $87.95 On Sale For: $79.99
|
|
|
 |
Angle Cut Exhaust Tip
4" Diameter Standard Length with Internal Flapper
These angle cut tips give a powerful attractive look to
any boat They're all 316L stainless steel construction assures a
long lasting and beautifully polished tip for years to come All
of our tips include flaps.4" models will accept slip in silencers. Sold Each.
| Dimensions: |
| Length Overall |
11-1/2" |
| Flange To Inside End |
5" |
| Flange To Outside End |
6-1/2" |
Regular Price: $89.99 On Sale For: $79.99
|
|
|
 |
Tall Aluminum Single Carburetor Air Scoop
This scoop features heavy duty .080 aluminum construction providing
durability and strength. Each scoop is welded inside and out to prevent
cracking. Then the scoop is polished to a show quality shine that is just
incredible. It also features a raised mounting flange providing plenty of
clearance for any carburetor. 5-1/2" front height, 4-1/2" rear
height, 10" width, 15-3/4" length.
Regular Price: $129.99 On Sale For: $119.99
|
|
|
 |
Stainless Steel Five Gauge Combination Set
Hardin
Marine has finally done it! They have revolutionized the marine gauge
market They have taken all the great features that were once only available
from the high priced gauge manufacturers and brought them down to an
incredibly affordable price Features like their "Domelux
Technology" that has taken the marine industry by storm This feature
helps to reduce surface glare by as much as 70% over old flat style lenses,
but that's not all! Coupled with flood incandescent lighting, easy gasket
sealed bezels and glass lens, couple that to a vibration resistant air core
movement and see why this style gauge has become the standard of most boat
builders today and the best part of all, it's at a price almost to good to
believe. Shop and compare, we're sure your new gauges will be Hardin Marine.
Includes:
- 3-3/8" 6000 RPM Tach
- 2-1/16" Fuel Level
- 2-1/16" Water Temp
- 2-1/16" Oil Pressure
- 2-1/16" Voltmeter
Regular Price: $169.99 On Sale For: $159.99
|
|
|
 |
Mayfair Deluxe Inside Hydraulic Steering Kit -Single Bravo With Dual Rams
This kit includes:
- (1) Power Steering Dump Cap
- (1) Banjo Fitting
- (1) Power Steering Reservoir Tank
- (1) 4 Inch Steering Column
- (1) Hydraulic Helm Control Unit
- (4) 3/8" NPT Adapter
- (1) Remote Reservoir Hose Kit
- (100) Feet -6 AN Hydraulic Hose Line
- (12) -6 AN Straight Brass Fittings
- (2) -6 AN X 1/4" NPT 90 Degree Fittings
- (6) -6 AN X 3/8" NPT Straight Fittings
- (2) -6 AN X 1/4" NPT Tee Fittings
- (1) Hi-pressure Power Steering Filter
- (1) -6 AN Hose End
The Mayfair by Hardin Marine full power
steering system is supplied with all the highest quality components that
are available today. This system will allow you to go from a
Mercury add-on system to a full hydraulic power steering system.
This will eliminate any back feed to the steering wheel that comes from
a cable assisted steering system. Mayfair by Hardin Marine is now
offering these full power steering systems for the new Mercury XR ITS
system, and the #6 SSM Speedmaster, and Bravo. Included in the kit
is a hydraulic helm, 4" extreme billet steering column, remote
reservoir, high pressure oil filter assembly, four special o-ring helm
fittings, the new billet power steering pump cap, -6 high pressure
hydraulic hose, hose ends, and complete instructions.
Regular Price: $1,599.99 On Sale For: $1,499.99
|
|
|
| more... |
|