|
|
|
880-1480 Calibration Kit for #EDE1407 & #EDE1410
Each kit includes one pair of metering rod retaining springs
and assorted pairs of metering rods, metering jets, and step-up springs.
|
|
880-1488 Calibration Kit for #EDE1409
Each kit includes one pair of metering rod retaining springs
and assorted pairs of metering rods, metering jets, and step-up springs.
|
|
880-1485 Calibration Kit for #EDE1409 on a 4.3L V6
Each kit includes one pair of metering rod retaining springs
and assorted pairs of metering rods, metering jets, and step-up springs.
|
|
880-1466 High Flow Needles and Seats (pair)
|
|
880-1465 Off-Road Needles and Seats (pair)
|
|
880-1464 Step-Up Spring Assortment (5 pair)
|
|
740-64929 Pair of Stainless Steel Throttle Return Springs
These stainless steel throttle return springs are universal. Can be used in
numerous applications. These springs measure 5" in length and 1/2" in OD. They
can be trimmed to length.
|
|
710-300-124 Holley LS Hi-Ram EFI Manifold
- Runner Length – 6.29”, As-Cast Runner Cross-Sectional Area – Tapered 4.67in² to 2.84 in²
- Throttle Body Flange Location, with 92/102mm EFI Plenum Top : Height – 8.42” (from engine block lifter valley cover flange), Longitudinal Location – 3.84” (forward from engine block front flange), Angle – 25 deg. (down from vertical)
- Plenum Top Gasket Type – 3/32” Round O-ring Cord
- Mounting Flange Gasket Type – Standard LS3 Molded O-Ring
- Port Size – 2.49” Height x 1.21” Wide
- Total Height with 92/102mm EFI Plenum Top – 12.32” to the lifter valley cover flange on engine block.
- Base Plenum Top Mounting Flange Height – 8.42” to the lifter valley cover flange on engine block.
These parts should be used for the following applications: Racing/Performance/Street Rodder where hood restrictions are NOT a consideration. Top can be mounted forward or backward.
Holley EFI LS main harnesses have a map sensor connecter designed for use with an LS1/2 style map sensor. The 558-416 is an adapter harness that can be used to adapt any LS harness that uses a LS1/2 MAP sensor connection to a LS3 MAP, which is recommended for this manifold.
|
|
710-122 Carburetor Standard Main Jet
- Fits All Holley Model 2010, 2300, 4010, 4011, 4150, 4160 & 4500
- Sizes from 50-100
- 1/4-32 Thread
- Standard Main Jet
- Not for Use with Carburetors Originally Designed for Alcohol
|
|
710-125-25 Single-Stage Power Valve
Single-Stage Power Valve Standard Flow 2.5 in. Hg
|
|
710-125-50 Single-Stage Power Valve
Single-Stage Power Valve Standard Flow 5.0 in. High
|
|
710-125-55 Single-Stage Power Valve
Single-Stage Power Valve Standard Flow 5.5 in. High
|
|
710-125-65 Single-Stage Power Valve
Single-Stage Power Valve Standard Flow 6.5 in. High
|
|
710-125-75 Single-Stage Power Valve
Single-Stage Power Valve Standard Flow 7.5 in. High
|
|
710-125-85 Single-Stage Power Valve
Single-Stage Power Valve Standard Flow 8.5 in. High
|
|
