• Highly polished heavy gauge stainless steel.
• Sold Each.
• Fits Hardin Marine hatch actuators.
• Includes a 1/2" stainless steel actuator mounting bolt, washers and locknut.
• Fasteners for mounting the bracket to the boat and hatch are NOT included.

• Stainless steel pin and billet aluminum handle.
• Designed to be used in conjunction with the Hardin Marine hatch rams and mounting brackets.
• Quick and easy way to release the hatch ram for hatch removal or full range opening.
• Can also be used to release the hatch ram in the event of battery failure provided you have an access panel within easy reach of the pin.

• Marine grade stainless steel & aluminum construction
• 12 DC sealed electric motors, 2-wire simple hook-ups
• Compact Size, Light Weight, for Maximum Lifting Capacity
• Two Standard Length Cylinders with Simple Pin Mounts
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer
• Smooth Quiet Responsive Hydraulic Action with No-Coasting
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free
• Operating Temperatures 10 to 165 Degrees F
• System can Operate with Environmentally Responsible Fluid
• 18" Model  Dimensions: 26” Retracted Length, 44” Extended Length.
• NOTE: The 620-920016 is only bracket kit that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

• Marine grade stainless steel & aluminum construction.
• 12 DC sealed electric motors, 2-wire simple hook-ups.
• Compact Size, Light Weight, for Maximum Lifting Capacity.
• Two Standard Length Cylinders with Simple Pin Mounts.
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer.
• Smooth Quiet Responsive Hydraulic Action with No-Coasting.
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250 lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free.
• Operating Temperatures 10 to 165 Degrees F.
• System can Operate with Environmentally Responsible Fluid.
• 24" Model Dimensions: 32” Retracted Length, 56” Extended Length.
• NOTE: The 620-920016 is only bracket that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

• Lessens stress put on mounting bracket.
• Prevents damage to your mounting bracket.
• Stops the hatch ram from over-contracting.

• 3-position Momentary On/Off/Momentary On
• This switch is designed to be used for hatch rams and actuators.

• Extension is adjustable from 1 to 3 inches longer.
• Comes with mounting hardware.
• Extension for our hatch rams 620-920018, 620-920024, 730-SSA4, 730-SSA8, 730-SSA12, 730-SSA16.
• Inside Diameter is 1.150"

• Highly polished heavy gauge stainless steel.
• Fit Hardin Marine hatch actuators.
• Extension is adjustable from 1 to 3 inches longer.
• ID of extension tube is 1-1/8"
• Fasteners for mounting the bracket to the boat and hatch are NOT included.
• Use with our hatch rams 620-920018, 620-920024, 730-SSA4, 730-SSA8, 730-SSA12, 730-SSA16.

• Lessens stress put on mounting bracket.
• Prevents damage to your mounting bracket.
• Stops the hatch ram from over-contracting.
• Only to be used on 620-921018 and 620-921024.

• Highly polished heavy gauge stainless steel.
• Sold Each.
• Fits Hardin Marine hydraulic hatch actuators.
• Includes a 1/2" stainless steel actuator mounting bolt, washers, bushings and locknut.
• Fasteners for mounting the bracket to the boat and hatch are NOT included.
• Replaces 602-CM100

Replacement electric motor only. Fits many Livorsi hatch ram, Warner Hatch ram, Hardin Hatch ram and Thomson Hatch ram models. Mounting Bolt Center to Center is 2"

NOTE: These are NEW "Old Stock" Items and are NON-RETURNABLE. Make sure this will fit your application before purchasing!