Deck & Dash Hardware - Hatch Actuators and Rams - Hydraulic

• Marine grade stainless steel & aluminum construction
• 12 DC sealed electric motors, 2-wire simple hook-ups
• Compact Size, Light Weight, for Maximum Lifting Capacity
• Two Standard Length Cylinders with Simple Pin Mounts
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer
• Smooth Quiet Responsive Hydraulic Action with No-Coasting
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free
• Operating Temperatures 10 to 165 Degrees F
• System can Operate with Environmentally Responsible Fluid
• 18" Model  Dimensions: 26” Retracted Length, 44” Extended Length.
• NOTE: The 620-920016 is only bracket kit that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

• Marine grade stainless steel & aluminum construction.
• 12 DC sealed electric motors, 2-wire simple hook-ups.
• Compact Size, Light Weight, for Maximum Lifting Capacity.
• Two Standard Length Cylinders with Simple Pin Mounts.
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer.
• Smooth Quiet Responsive Hydraulic Action with No-Coasting.
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250 lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free.
• Operating Temperatures 10 to 165 Degrees F.
• System can Operate with Environmentally Responsible Fluid.
• 24" Model Dimensions: 32” Retracted Length, 56” Extended Length.
• NOTE: The 620-920016 is only bracket that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

FOR USE ACTUATING HATCHES OR DOORS
26" Retracted Length With An 18" Stroke
44" Extended Length
6063T832 Hard Coat Anodized Aircraft Grade Aluminum Tube 1" Bore With 5/8" Stainless Steel Shaft.
Double Acting Cylinder, Power-Up/Power-Down
For Mounting Use CM100 Stainless Steel Clevis

32" Retracted Length With A 24" Stroke
56" Extended Length 6063T832 Hard Coat Anodized Aircraft Grade Aluminum Tube 1" Bore With 5/8" Stainless Steel Shaft.
Double Acting Cylinder, Power-Up/Power-Down.

• Highly polished heavy gauge stainless steel.
• Sold Each.
• Fits Hardin Marine hydraulic hatch actuators.
• Includes a 1/2" stainless steel actuator mounting bolt, washers, bushings and locknut.
• Fasteners for mounting the bracket to the boat and hatch are NOT included.
• Replaces 602-CM100

• Stainless steel pin and billet aluminum handle.
• Designed to be used in conjunction with the Hardin Marine hatch rams and mounting brackets.
• Quick and easy way to release the hatch ram for hatch removal or full range opening.
• Can also be used to release the hatch ram in the event of battery failure provided you have an access panel within easy reach of the pin.

• Lessens stress put on mounting bracket.
• Prevents damage to your mounting bracket.
• Stops the hatch ram from over-contracting.
• Only to be used on 620-921018 and 620-921024.

Complete Power Unit with Bulkhead Mount Plate and Relays.
Wired ready to hook up.
This pump is to be used with 2 CYL18 or CYL24 cylinders to make a hatch lift system that can lift up to 1,000 LBS. This system make a great replacement for electric hatch lifters that have failed.
Requires 4 Hoses & 4 CM100 Clevis Mounts