462-11-69724P Stylish White bezel design, black on white graphics, accurate and reliable, these tough instruments look good on all types of boats. Domed glass sheds water and resists scratching. Instruments available for most outboards, stern drives and gasoline-powered inboards.
Features:
- Enhanced illumination: through-dial and perimeter lighting for excellent readability at night
- U.S. and metric scales, with ISO symbols, where appropriate
- Optional add-on eyebrow or square bezels available
- Includes Tach, Voltmeter, Oil Pressure & Water Temp
Stylish White bezel design, black on white graphics, accurate and reliable, these tough instruments look good on all types of boats. Domed glass sheds water and resists scratching. Instruments available for most outboards, stern drives and gasoline-powered inboards. Features:- Enhanced illumination: through-dial and perimeter lighting for excellent readability at night
- U.S. and metric scales, with ISO symbols, where appropriate
- Optional add-on eyebrow or square bezels available
Size: 0, Type: Inboard 4 Gauge Set - Tach (to 7,000 rpm), Voltmeter (8-18 VDC 12-volt systems), Oil Pressure (0-80 psi), Water Temp (120°-240°F), Sender Code: C, D, F Sold: Each
|
|
462-11-69723P Stylish White bezel design, black on white graphics, accurate and reliable, these tough instruments look good on all types of boats. Domed glass sheds water and resists scratching. Instruments available for most outboards, stern drives and gasoline-powered inboards.
Features:
- Enhanced illumination: through-dial and perimeter lighting for excellent readability at night
- U.S. and metric scales, with ISO symbols, where appropriate
- Optional add-on eyebrow or square bezels available
- Includes Tach, Voltmeter
Stylish White bezel design, black on white graphics, accurate and reliable, these tough instruments look good on all types of boats. Domed glass sheds water and resists scratching. Instruments available for most outboards, stern drives and gasoline-powered inboards. Features:- Enhanced illumination: through-dial and perimeter lighting for excellent readability at night
- U.S. and metric scales, with ISO symbols, where appropriate
- Optional add-on eyebrow or square bezels available
Size: 0, Type: Outboard 2 Gauge Set - Tach (to 7,000 rpm), Voltmeter (8-18 VDC 12-volt systems), Sender Code: C, D, F Sold: Each
|
|
462-1-HO6001 Twin Engine, Single Cylinder Tie Bar Description: Twin Engine/1 Cylinder Sold: Each
|
|
462-1-HO6002 Twin Engine, Twin Cylinder Tie Bar Description: Twin Engine/2 Cylinder Sold: Each
|
|
462-1-CH5300P Twin Control - Dual Function Top Mount Lever
Combines classic binnacle styling with dual function levers, a neutral safety switch, and an engine warm-up feature. Now features longer shift travel for certain MerCruisers or longer runs with many bends in cable mounting. Uses 3300/33C cables (single & dual lever) and 4300/43 type cables (single lever only).
|
|
462-354-2271411 White. Fastener #6 RH.
A: 1-1/4", B: 5/8", C: 15"/16", D: 1", E: 1/4", Pack: 1 set
Sold: Pack
|
|
462-1-CH5200P Twin S Single Function
Ideal for single or dual station inboard, I/O, and O/B applications. Single function control - each lever controls throttle OR shift. Utilize 3300/33C or 4300/43C type cables. Adjustable throttle friction and shift detent feel. Optional neutral safety switch and clutch detent kit available.
|
|
462-354-0792331 "Twin shanks eliminate the possibility of twisting or rotating. Die cast chrome zinc head with a chrome plated steel shaft. Thread is 5/16"-18 UNC."
A: 5/16", B: 2-15/16", C: 1-1/8", D: 5-1/4", E: 1-5/8"
Sold: Each
|
|
560-74026 McGard Stern Drive Locks - Twin Speedmaster Stern Drive Lock
- Overall Lock Length: .775"
- Thread Size 5/8" - 18
- Hex Size 3/4"
- Set of 2 Locks, 1 Key, 2 Caps and 1 Thread Lock Adhesive
Stern Drive Applications: MerCruiser III SSM, IV SSM, V SSM, VI SSM, NXT
Stern drive theft is on the rise, don't take a chance on losing your favorite outdrive or prop, for that matter be safe not sorry. Simply replace one of the stern drive mounting nuts with a McGard lock. Stern drive locks are fully machined from high quality stainless steel and through-hardened. This proven design features a free-spinning collar that turns if attacked by gripping tools without loosening the lock. Give yourself the best protection available against stern drive theft. Ask for McGard Marine Locks by name.
|
|
462-371-74019 Simply replace one of the sterndrive mounting nuts for theft protection. Stainless steel with free-spinning collar that will turn if attacked by gripping tools. No assembly required. Fits Mercruiser®; Alpha, Bravo I-III (Incl. X & XR), Blackhawk, OMC Cobra & King Cobra, and Volvo SX & DP-S stern drives. 74019 twin drive set includes 2 locks and 1 key. Carded for pegboard or for P.O.P. merchandiser. Description: Twin Stern Drive, Finish: Stainless Sold: Each
|
|
560-74025 McGard Stern Drive Locks - Twin Drive Lock
- Overall Lock Length: .750"
- Thread Size: M12 x 1.25
- Hex Size: 5/8"
- Set of 2 Locks, 1 Key and 2 Caps
Stern Drive Applications: Yamaha
Stern drive theft is on the rise, don't take a chance on losing your favorite outdrive or prop, for
that matter be safe not sorry. Simply replace one of the stern drive mounting nuts with a McGard lock. Stern drive locks are fully machined from high quality stainless steel and through-hardened. This proven design features a free-spinning collar that turns if attacked by gripping tools without loosening the lock. Give yourself the best protection available against stern drive theft. Ask for McGard Marine Locks by name.
|
|
462-35-DP50B Watertight, overlapping cover conceals fasteners for a clean, modern look. Three separate sealing rings assure a watertight closure. Twist threads are non-jamming, self-cleaning, and lift the center for easy removal. High impact, marine quality plastic with UV inhibitors. ID: 5", OD: 7", Hole: 5-1/2" , Color: Black
|
|
462-35-DP50W Watertight, overlapping cover conceals fasteners for a clean, modern look. Three separate sealing rings assure a watertight closure. Twist threads are non-jamming, self-cleaning, and lift the center for easy removal. High impact, marine quality plastic with UV inhibitors. ID: 5", OD: 7", Hole: 5-1/2" , Color: White
|
|
620-70161 Twist-In Chrome Breather
Some of these are marked "Ansen", some are unmarked.
|
|
462-354-2212061 Machined AISI 304 stainless steel. A unique plastic bushing in the eye prevents accidental unhooking due to vibration. Extra staple commonly used for securing doors in the open position. A: 2-3/8" , B: 1" , C: 11/16" , D: 1-1/16" , Fastener: #8 FH
|
|
462-354-2212071 Machined AISI 304 stainless steel. A unique plastic bushing in the eye prevents accidental unhooking due to vibration. Extra staple commonly used for securing doors in the open position. A: 3-1/4" , B: 1" , C: 11/16" , D: 1-1/16" , Fastener: #8 FH
|
|
462-354-2212081 Machined AISI 304 stainless steel. A unique plastic bushing in the eye prevents accidental unhooking due to vibration. Extra staple commonly used for securing doors in the open position. A: 3-15/16" , B: 1" , C: 11/16" , D: 1-1/16" , Fastener: #8 FH
|
|
462-1-AP1233 Fixed flow, reversible pump set that uses an internal hydraulic gear pump, producing very little vibration or noise.
- Long life DC motor (i.e. long life brushes)
- Compact design
- Simplified installation
- Low power consumption
- ABYC, CE and J1171 compliant
- Superior corrosion resistance
- Quiet operation
- Mounting bracket included
- Stand alone or mounts to SeaStar Power Assist unit
|
|
462-606-3650126 Barrier lined low permeation A1-15 marine fuel hose. 2 spiral reinforcement with barrier liner on inside surface of tube. Resistant to fuels, fire, heat, cold, ozone, aging and permeation. CE certified, CARB & EPA compliant. SAE J1527, USCG type A1, ISO 7840 A1, ABYC H-24 & H-33. 5 year warranty. ID: 1/2", OD: 13/16", Length: 50', Bend: 2-1/2", Working Pressure: 100#
|
|
462-606-3650146 Barrier lined low permeation A1-15 marine fuel hose. 2 spiral reinforcement with barrier liner on inside surface of tube. Resistant to fuels, fire, heat, cold, ozone, aging and permeation. CE certified, CARB & EPA compliant. SAE J1527, USCG type A1, ISO 7840 A1, ABYC H-24 & H-33. 5 year warranty. ID: 1/4", OD: 17/32", Length: 50', Bend: 1-1/2", Working Pressure: 100#
|
|
