Generic

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Tube-Hose Connector 1/2"

Sold: Each

• Tubular stainless steel, buffed to prevent corrosion.
• Easy to mount anywhere there is access to a thru-bolt.
• Made with 2" x 5/16" studs and mounts flush with included hardware.
• Lifetime guarantee.
• Made in the USA.
• Size: 12"

Chrome spray head with water conservation button
Contains all basic shower kit parts, all hoses and wiring
Demand 2.2 gpm DC pump
Universal fitting kit
Flush mount

• Chrome spray head with water conservation button


• Contains all basic shower kit parts, all hoses and wiring


• Demand 2.2 GPM 12V pump


• Universal fitting kit


• Flush mount

:

Sold: Each

Tune up kits include cap and rotor.

Description: 4 Cylinder, Application: Crusader, Indmar, Mercruiser, OMC, Yamaha

Sold: Each

Tune up kits include cap and rotor.

Description: V-8, Application: Crusader, Indmar, Pleasurecraft, Mercruiser

Sold: Each

Includes cap and rotor.

Fits: GM V-8 engines with Delco HEI 1998 and newer (except MPI engines with 555 ECM), OEM #: Mercruiser 808483K2

Sold: Each

Contains: Contact set, condenser, distributor cap and rotor.

Description: 4 cyl. Single Point

Sold: Each

Tune Up Kit Mercruiser And Crusader

Description: OEM# Merc 850484T3, Delco EST - V6

Sold: Each

Application: Mercury Thunderbolt HEI - V-6

Sold: Each

Contains: Contact set, condenser and rotor and distributor cap.

Application: Indmar, Crusader, Fits: V-8 Mallory Single Point

Sold: Each

Contains: Contact set, condenser and rotor and distributor cap.

Application: Chris-Craft, Crusader, Indmar, Mercruiser, OMC Sterndrive/Cobra, Pleasurecraft. Prestolite, Fits: V-8 Single Point Screw Cap

Sold: Each

Replaces: 898253T29. For: Late model V-8 (Alpha/Bravo 350 Mag, 5.0L, & MX 6.2L)

Replaces: 898253T29

Sold: Each

Jaw and jaw, hot galvanized.
Size: 5/16" x 4-1/2" Take-up, Length: 9-1/4" Closed

Jaw and jaw, hot galvanized.
Size: 3/8" x 6" Take-up, Length: 11-1/2" Closed

Jaw and jaw, hot galvanized.
Size: 1/2" x 12" Take-up, Length: 19-1/2" Closed

Smart white and blue graphics on a black dial background, these very low profile bezels follow the curve of the lense to eliminate water trapping. Design with domed glass sheds water and resists scratching. Instruments available for most outboards, stern drives and gasoline-powered inboards.

• Scratch-resistant domed glass lenses


• Perimeter lighting for excellent readability at night


• U.S. and metric scales, with ISO symbols, where appropriate


• Optional add-on eyebrow or square bezels available


• Includes Tach, Voltmeter, Oil Pressure & Water Temp

• Scratch-resistant domed glass lenses


• Perimeter lighting for excellent readability at night


• U.S. and metric scales, with ISO symbols, where appropriate


• Optional add-on eyebrow or square bezels available

Size: 0, Type: Inboard 4 Gauge Set - Tach (to 7,000 rpm), Voltmeter (8-18 VDC 12-volt systems), Oil Pressure (0-80 psi), Water Temp (120°-240°F), Sender Code: C, D, F

Sold: Each

Smart white and red graphics on a black dial background, these very low profile bezels follow the curve of the lenses to eliminate water trapping. Design with domed glass sheds water and resists scratching. Features:

• Instruments available for most outboards, stern drives and gasoline-powered inboards


• Enhanced illumination: through-dial lighting for excellent readability at night


• U.S. and metric scales, with ISO symbols, where appropriate


• Includes Tach, Voltmeter, Oil Pressure & Water Temp

• Instruments available for most outboards, stern drives and gasoline-powered inboards


• Enhanced illumination: through-dial lighting for excellent readability at night


• U.S. and metric scales, with ISO symbols, where appropriate

Size: 0, Type: Inboard 4 Gauge Set - Tach (to 7,000 rpm), Voltmeter (8-18 VDC 12-volt systems), Oil Pressure (0-80 psi), Water Temp (120°-240°F), Sender Code: C, D, F

Sold: Each