462-606-200600048 It is a premium type certified wet exhaust hose for short straight connections. Thick tube and cover with 2 or4 ply reinforcement. Resists heat, ozone, fumes and collapse. Exhaust hose should be double clamped. Exceeds all marine exhaust standards. Blue stripe. 3 year warranty. ID: 6", OD: 6-5/8", Length: 4', Type: 4 ply, Working Pressure: 48#
|
|
462-606-2008004 It is a premium type certified wet exhaust hose for short straight connections. Thick tube and cover with 2 or4 ply reinforcement. Resists heat, ozone, fumes and collapse. Exhaust hose should be double clamped. Exceeds all marine exhaust standards. Blue stripe. 3 year warranty. ID: 8", OD: 8-7/8", Length: 12-1/2', Type: 4 ply, Working Pressure: 42#
|
|
462-606-1461126 Heavy wall vinyl hose with a smooth interior. Low permeation. Hard PVC helix gives exceptional flexibility and bend radius. Not recommended for use below the waterline. Use for holding tank pump out, bilge, drains, live well, etc. White is FDA approved for potable water fill. OPS Temp 10° to +140° F. 2 year warranty. ID: 1-1/2", OD: 1-25/32", Length: 50', Bend: 1-1/2", VAC: 20, Color: Very Light Grey Sold: Each
|
|
462-606-1341006 High temperature, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Resistant to coolants, ozone, cold and heat; and serves a variety of boat and plant pressurized applications. 300 psi, Temp -40°F to 212°F. For below water line intake and discharge applications. 4 spiral. ID: 1", Length: 50'
|
|
462-606-1340126 High temperature, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Resistant to coolants, ozone, cold and heat; and serves a variety of boat and plant pressurized applications. 300 psi, Temp -40°F to 212°F. For below water line intake and discharge applications. 4 spiral. ID: 1/2", Length: 50'
|
|
462-606-1340346 High temperature, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Resistant to coolants, ozone, cold and heat; and serves a variety of boat and plant pressurized applications. 300 psi, Temp -40°F to 212°F. For below water line intake and discharge applications. 4 spiral. ID: 3/4", Length: 50'
|
|
462-606-1340386 High temperature, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Resistant to coolants, ozone, cold and heat; and serves a variety of boat and plant pressurized applications. 300 psi, Temp -40°F to 212°F. For below water line intake and discharge applications. 4 spiral. ID: 3/8", Length: 50'
|
|
462-606-1340586 High temperature, EPDM rubber, polyester reinforced and exceeds SAE J20R3. Resistant to coolants, ozone, cold and heat; and serves a variety of boat and plant pressurized applications. 300 psi, Temp -40°F to 212°F. For below water line intake and discharge applications. 4 spiral. ID: 5/8", Length: 50'
|
|
|
|
462-47-6750 "For 1983 and later Mercruiser applications w/o "quick connect"." Description: Trim Bracket, Stainless Steel. Floor mnt., Replaces: 862548A1, 42419A1 Sold: Each
|
|
615-160-51-0208-08 Trim Cap No.5426
- Availablr: (3) Three
- Condition: not new, old stock
Jacuzzi Eagle Jet Drive Parts
|
|
160-14-1772-08 Trim Cap Bolts
|
|
160-13-0370-07 Trim Cap Gasket
|
|
462-47-6798 Replaces: 69J-43880-00-00, 60V-43880-00-00. Fits: F200, F225 (2004-06), F250 (2005-06), LF200, LF225, LF250, LZ200, LZ225, LZ250 (2004-06) : Sold: Each
|
|
462-338-PR500 Assembly allows Smart Tabs to be set in two different positions without the use of any additional tools. When the bracket handle is in the down position the Smart Tabs will function as trim tabs. When the bracket handle is in the up position they will be fully retracted. The brackets are ideal for use when rack storing a boat, beaching a tender or in very shallow water conditions for example. Note: For use with any Smart Tabs or Mobster Tabs system. : Sold: Each
|
|
462-49-NT2039 Trim ring fits N0039-10FX, N0039-10FXN, N06399-10FX, N1039-10A, N2039-10A hatches.
Description: Trim Ring. Black
Sold: Each
|
|
|
|
160-14-0717-08 Trim Set Screw
|
|
462-47-6241 Always check propeller clearance after installing new trim tab anodes.
Description: Magnesium , Fits: Mercruiser - 31640, 31640A1, 31640 T6, 31640Q 4.<BR>For: R/MR/Alpha One (Sterndrive & Transom Assembly '83-90) & prior drives. Honda 41107-ZW1-0032A
Sold: Each
|
|
462-47-6011 Always check propeller clearance after installing new trim tab anodes.
Fits: Honda - 41107-ZW1-003ZA,
Mercruiser - 31640A1, 31640Q 4, Material: Zinc
Sold: Each
|
|