Generic

Trim Tab Anode Kit. Includes 2 anodes w/bolts.

Description: 2 Anodes & Bolts, Pack: 2

Sold: Pack

"Airboat-specific trim tab design. 14" wide planing surface provides greater lift and less drag. The hydrodynamically designed side protrusions will not "dig in" during a hard turn which will result in a safer ride. The bent-up rear lip provides lateral strength across the entire trim tab blade. Blade is 12-gauge 304 stainless steel with 2" hinge height and 1/8" diameter hinge pin. The adjustable actuator mounting bracket on the blade allows for proper fit on many different transom angles. In the retracted position, the airboat tab is safely protected when running dry.
Airboat Trim Tab Kits contains:
1) 12-gauge 304 stainless steel trim tab plane
1) #15055-001 actuator with 6' lead & Deutsch plug
1)#30133-002 14' actuator extension wiring harness
1) #15085-001 (116) upper mounting bracket with gland seal
Owner's/installation manual & stainless steel mounting hardware
Switch sold separately (15095001)"

• Airboat Trim Tab Kits contains:


• 1) 12-gauge 304 stainless steel trim tab plane


• 1) #15055-001 actuator with 6' lead & Deutsch plug


• 1)#30133-002 14' actuator extension wiring harness


• 1) #15085-001 (116) upper mounting bracket with gland seal


• Owner's/installation manual & stainless steel mounting hardware


• Switch sold separately (15095001)

Size: 9"L x 14"W"

Sold: Each

Span x Chord: 12" x 9", Boat Size: 15'-19'

"Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")."

Includes: "TC1 (1/2"- 7/8" span) and a T3: 5/8" x 2-3/4" rod", Finish: Stainless

Sold: Each

"Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")."

Includes: "TC1 (1/2"- 7/8" span) coupler lock and a T3: 5/8" x 2-3/4" rod", Finish: Chrome

Sold: Each

"Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")."

Includes: "TC2 (2-1/2" span) and a T3: 5/8" x 2-3/4" rod", Finish: Chrome

Sold: Each

"Easy operation - 1/4 turn locks & unlocks head. Can't pop open or be falsely locked. Exclusive design incorporates O-Rings and water tight cap to help seal out dirt and corrosion in the lock head mechanism. Full length solid forged lock pin can't pull out. Fits Class III trailer receivers (2" x 2")."

Includes: "TC2 (2-1/2" span) and a T3: 5/8" x 2-3/4" rod", Finish: Stainless

Sold: Each

Universal trolling motor bracket for clamp-on type trolling motors. Designed for motor to be removed when boat is under engine power or being trailered. Made of cast aluminum with seasoned wood mounting block. Maximum thrust of 36 pounds.

Rating: 36 lbs Thrust

Sold: Each

TRS Tie Bar Saddle

Contains 100% Carnauba wax, U.V. sunlight inhibitors and fluorocarbon polymer resins. Stays liquid longer and can be applied to larger areas at a time. Can be applied in extreme heat without caking. One application lasts a whole season.

Description: True Wax Sealant, Size: 16 oz., Case: 12

Stainless steel trumpet tube cover fits all Sea-Dog air horns and the Max Blast electric trumpet horns. Keeps green water and bugs from getting into the trumpet tube, and snaps over the end of the tube - No tools necessary. 304 Stainless.

Size: " 3-15/16" ? 2-3/16"

Sold: Each

TSW Water Temp & Speed Sensor

Description: Temp/Speed Sensor, Model: TS W

Sold: Each

Impact-resistant and waterproof (non-submersion) the Tube light is designed & tested to withstand use in marine and other outdoor environments. TACO's T-top Tube Light makes it easy to upgrade to LED. The T-top Tube light is a great replacement light and will fit most standard florescent T-top light housings. With its sleek, finished appearance and mounting clamps (included) the Tube Light can be used as-is and easily mounted to T-tops.

Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on standard 12V batteries. Its generous 18' length of safe shielded cable is great for use on tops, bridges and towers of all sizes.

Size: 20" x 2"

Sold: Each

Impact-resistant and waterproof (non-submersion) the Tube light is designed & tested to withstand use in marine and other outdoor environments. TACO's T-top Tube Light makes it easy to upgrade to LED. The T-top Tube light is a great replacement light and will fit most standard florescent T-top light housings. With its sleek, finished appearance and mounting clamps (included) the Tube Light can be used as-is and easily mounted to T-tops.

Highly efficient, the LED T-top light offers long 100,000-hour operating life with virtually no drain on standard 12V batteries. Its generous 18' length of safe shielded cable is great for use on tops, bridges and towers of all sizes.

Size: 20" x 2"

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 3", Length: 4"

Sold: Each

For exhaust hose, elbows, hump hose & reducers. Fire retardant/heat resistant USA made (install minimum 2' downstream from point of cooling water injection.) 200° max continuous operating temperatures.

OD: 4", Length: 6"

Sold: Each

"Cast 316 Stainless steel.
Attaches to any 1" OD stainless tubing with two 1/4"-28 set screws (included) to create custom antenna mounts. Threaded for standard 1"-#14 threads.

Size: 2" L", Case: 5

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: Tube Mounting Clip 15mm

Sold: Each

"All SeaStar manual hydraulic steering systems utilize the same style of fittings for all applications. These are 3/8" compression fittings which utilize a 9/16"-24 extra fine thread."

Type: "Tube Nut 3/8", Material: Brass, Bag: 6

Sold: Bag