Generic

• Handles 9/16" three-strand windlass grade rope and 5/16" G4 ISO American high-test chain
• Electro-polished 316 stainless steel deck unit
• Features FastFit, which makes installation quick and easy and ensures proper drive shaft alignment during installation
• Maximum pull power 1433 lb.
• 12 Volt motor

Rating: 69 ft/min, Boat Size: Up to 44', Line Size: 9/16", Chain: 5/16", Watts: 700

Sold: Each

Compact, stainless-steel windlasses for power and sail boats feature an elegant, low-profile design that conceals a robust, reliable drive train. The worm gearbox, spline shaft and drive train guarantee maximum strength, control and performance with every use. Plus, they deploy rope/chain or all-chain anchor rodes at the touch of a button.
Features emergency manual override and chain. Includes breaker, up/down switch, dual-direction solenoid and clutch handle. 12V.

Rating: 82 ft/min, Boat Size: 50'-70' , Line Size: 5/8", Chain: 3/8", Watts: 1600

Sold: Each

Crankshaft-driven bronze/brass raw water pump with integrated cam. Replaces or supersedes older numbers including 857451, 855722, 856952, 856513, 826456, 841640, and 3860703. Note that replacing an older pump design with the current 857451 may require shorter crankshaft mounting bolts. Replaces OEM crankshaft-mounted raw water / sea water pump used on various Volvo Penta marine engines (such as V-6, V-8, AQ series, 3.0L to 8.1L / 7.4L models like 430, 500, 570, and 740 series). 1-1/4 in. inlet and outlet ports, 2 3/4 in. bolt circle, Bronze housing and cover.

Boat Size: Up to 35', Chain: 6mm & 7mm

• 100% 316 stainless steel deck unit
• Fall Safe anchor lock
• Fast line speed
• Impact-resistant motor cover
• With reed switch and magnet fitted as standard for chain counter applications
• Fits calibrated chains: 6mm DIN766, 1/4" G4 or BBB, 7mm DIN766
• Kit includes: windlass, base gasket seal, mounting studs, contactor, circuit breaker and rocker switch
• 5 year warranty

Sold: Each

Crank Driven Water Pump Bracket Bracket Only.

Fits 430-68-5001 pump.
Fits the small block Chevy engine.

Beret Soft Mantles, 2 per pack

Aids valve grinding and seating operations to remove burrs, surface defects, carbon, gum, and corrosion. Mixes with water to form an easy to use paste.

Size: 1.5 oz. tube, Case: 12

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 34-1/2", Top Width: 29/64", OEM #: 57-74271T

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 37", Top Width: 29/64", OEM #: 57-65607T

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 40", Top Width: 29/64", OEM #: 57-32850, 57-69143T, OMC 311606

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 41", Top Width: 29/64", OEM #: 57-49043A1, 57-64032A1, 57-98043, Volvo 950813

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 43-1/2", Top Width: 29/64", OEM #: 57-64416, OMC 912509, Volvo 958314, 958359, 958359-2, 966382

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 44", Top Width: 29/64", OEM #: 57-49213A1, 57-45856, OMC 311046

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 45", Top Width: 29/64", OEM #: OMC 914787, Volvo 960336, 3858462

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 45-1/2", Top Width: 29/64", OEM #: OMC 908929, Volvo 3852464

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 46", Top Width: 29/64", OEM #: 57-48120A1, OMC 310953, 909971, Volvo 829207, 950818

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 47", Top Width: 29/64", OEM #: 57-78200A1

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 48", Top Width: 29/64", OEM #: 57-48122

Sold: Each

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

• High strength synthetic cords resist shockload failure.


• The compression section is a special rubber compound that assures smooth and even transfer of load forces to the cords.


• Cogs are molded to precise engineering tolerances to improve flexibility and maintain cord support. Cog geometry provides a large area for air circulation to keep the belt cool and prevent damaging heat build up in the cushion section.


• Rubber edges maintain positive, no-slip contact with pulley grooves.

Eff. Length: 52", Top Width: 29/64", OEM #: 57-33170, Q, 57-37619T, OMC 912714

Sold: Each