Generic

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 2-7/8", B: 4-1/4", C: 1-5/8", D: 1-1/2", E: 2", Pack: Carded

Sold: Each

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 1-7/8", B: 3-1/2", C: 1-1/8", D: 1-1/8", E: 1-3/8", Pack: Carded

Sold: Each

Size: 10" x 20"

"A low cost method to drain water from virtually anywhere. They have a very low profile head to allow complete drainage. Drains mount easily in a 1-3/8" diameter hole and are secured with the molded nut that is included. Hose barbs fit 3/4" hose for routing of drainage."

:

Sold: Each

This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.

Setback: 10"

This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.

Setback: 12"

This high-tech, high-speed, one piece design features an innovative Rod and Slot lift system to handle the stresses from the heaviest and most powerful V6 outboards on the market. All hydraulics are built into the jack, eliminating the installation of pumps and reservoirs inside the transom as well as hydraulic hoses running through the transom. The high-tech engineered polymer rods are 6 times more abrasion resistant than steel and are manufactured from self-lubricating material. Lifts from top to bottom in 8 seconds and installs in half the time of comparable jacks. Handles all outboards including the powerful Verado V6 motors.

Setback: 8"

"The smallest and lightest hydraulic jack on the market is ideal for shallow water skiffs and flats boats. It has a footprint of only 14-5/8" W x 11-1/2" H with a weight of only 23 lbs. The strong, self-contained actuator takes only 8 seconds to go from top to bottom and has 5" of travel. 3 mounting hole options on the transom side and 2 on the engine side. Optional adapter available to accommodate clamp-on outboard motors if needed."

Setback: 4", Application: 115hp

Sold: Each

"Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors."

Fits: 4" and 8" Models", Color: Black w/SS Bezel

"Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors."

Fits: 6", 10" and 12" Models", Color: Black w/Black Bezel

"Digital LED position gauges fit Atlas hydraulic jack plates. Numbers range from 0-20 and each number indicates a 1/4" rise. Atlas jack plates are predrilled to accept sensors."

Fits: 6", 10" and 12" Models", Color: Black w/SS Bezel

• Shaped inserts fit both Optima^®D27M and D31M series
• Rugged poly tray with 8 mounting slots
• Poly strap with stainless steel buckle
• Resistant to UV and corrosion

"Bolt kit for mounting outboard engine to jack plates. Kit contains:

• 4 each 1/2"-13 x 3" long bolts - stainless steel


• 4 each 1/2"-13 lock nuts - brass with nylon insert


• 8 each 1/2"-flat washers - stainless steel

• 4 each 1/2"-13 x 3" long bolts - stainless steel


• 4 each 1/2"-13 lock nuts - brass with nylon insert


• 8 each 1/2"-flat washers - stainless steel

:

Sold: Pack

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 1-7/8", B: 3-1/2", C: 1-1/8", D: 1-1/8", E: 1-3/8", Pack: Carded

Sold: Each

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 2-7/8", B: 4-1/4", C: 1-5/8", D: 1-1/2", E: 2", Pack: Carded

Sold: Each

High quality UV and chemical resistant virgin polypropelene. Features a finished head and a single pass around nut.

A: 1-1/2", B: 2-1/2", C: 1", D: 3/4", E: 1", Pack: Carded

Sold: Each

"Distributes strain from bends in the hose. Watertight gripper fitting-no leaks. Flange is 2-3/4" diameter and requires 1-1/4" installation hole."

:

Sold: Each

Provides a fully open area to pass wiring and cables through and when rigging is complete. Constructed of rugged black vinyl that resists UV rays, gasoline and oil.

Description: 4-1/2" Cable Boot", Pack: Card

Sold: Each

Molded, UV and weather resistant.

Color: Black, Size: 9/16" x 1-7/8", Pack: 2, Case: 12

Sold: Pack

Molded, UV and weather resistant.

Color: White , Size: 9/16" x 1-7/8", Pack: 2, Case: 12