Generic

These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.

Description: Flange, Size: 2'', Color: Black

Model: Rigging flange w/fuel hose port

Model: Rigging flange w/fuel hose union

These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.

Description: Hose, Size: 2'' x 50', Color: Black

Sold: Each

These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.

Description: Hose, Size: 2'' x 50', Color: White

Sold: Each

These components provide an excellent system to protect cables and wiring from dirt, abrasion, sun and water. The rigging flange serves to connect the rigging hose from the engine to the boat. The flange is internally threaded to retain the rigging hose and to make rigging adjustments easy. The back side of the flange is textured to allow inverted mounting. The rigging hose is durable, flexible, and kink resistant and is commonly found on many new boats.

Description: Hose, Size: 2'' x 50', Color: Gray

Sold: Each

Ignition Kill Switch w/Lanyard

• Meets all requirements for emergency stop switches


• Strong coiled lanyard


• Isolated circuits on dual units to prevent feedback


• Mounts anywhere - requires 1-1/2" hole

Description: Single Outboard

Sold: Each

Size: 4-1/4" OD x 3-1/2" D, Hole: 3-3/4", Case: 12

• High Quality UV and Chemical Resistant Virgin Polypro


• Sized to Fit All Marine Hose

A: 1-3/8, B: 4-1/2", C: 3", D: 3/4" extended", E: 1", Color: White

Sold: Each

• High Quality UV and Chemical Resistant Virgin Polypro


• Sized to Fit All Marine Hose

A: 1-7/8", B: 5-3/8", C: 3-3/8", D: 1-1/8" extended", E: 1-3/8", Color: White

Sold: Each

A: 2-7/8", B: 2-3/4", C: 1", D: 1-1/2" short, E: 2", Color: White

• High Quality UV and Chemical Resistant Virgin Polypro


• Sized to Fit All Marine Hose

A: 1-7/8", B: 3-1/2", C: 1-3/4", D: 1-1/8", E: 1-3/8", Color: White

Sold: Each

• High Quality UV and Chemical Resistant Virgin Polypro


• Sized to Fit All Marine Hose

A: 2-7/8", B: 3-1/2", C: 1-3/4", D: 1-1/2", E: 2", Color: White

Sold: Each

These hatches provide an attractive and economical way to access horizontal or vertical storage areas. Watertight lid overlapping frame. Two separate seals on frame and lid. No visible fasteners. Corrosion-free integrated hinge. Hinges allow 180° opening.

ID: 9-5/16" x 14-3/16", OD: 12-3/4" x 17-3/4", Size: 13" x 17", Color: Polar White

Eliminates or reduces right hand steering torque caused by jacked-up transom heights and high pitched propellers. Inexpensive, simple to install and does not reduce speed. Cast aluminum construction complete with installation hardware and instructions.

:

Sold: Each

"Distributes the stress of the motor mounting bolts
High quality cast aluminum
3/8" thickness"

• Distributes the stress of the motor mounting bolts


• High quality cast aluminum


• 3/8" thickness

Description: 10" Bolt Hole Pattern"

Sold: Each

"Distributes the stress of the motor mounting bolts
High quality cast aluminum
3/8" thickness"

• Distributes the stress of the motor mounting bolts


• High quality cast aluminum


• 3/8" thickness

Description: 13" Bolt Hole Pattern"

Sold: Each

Put a trim switch or hydraulic jack plate anywhere you want with this versatile switch. The Transom Trim Control Switch provides a weatherproof tilt control system at the stern area of the boat to facilitate placing motor support in position with one person. Switch can also be used for remote adjustment of hydraulic jack plates. The switch housing is molded black plastic with raised white letters and may be mounted on any flat surface, comes with 18" pigtail wire and installation instructions.Trim switch for outboards or stern drives

• Hydraulic jack plate switch
• Puts tilt & trim control anywhere you want it
• Waterproof push button switches
• UV stable molded housing

Protects trolling motors from damage. Mounting box allows for a simple 4 screw installation in any location. Kit includes breaker, 3' of 8-Ga wire to battery, mounting box, fasteners & second ring terminal for attaching trolling motor wire.

Amps: 50

Sold: Each

Machined from 300 series stainless steel, the Troll-Tamer™ Trolling Motor Stabilizer Lock is designed to securely hold the trolling motor in place to prevent damage to the trolling motor and boat. No more worries about inadequate hold down devices, it has been designed and tested in the nastiest conditions by top touring pros.

• Prevents Damage to Trolling Motors
• Locks Motor to Deck Securely
• Locking Pin with Quick Release Toe Kick Base
• All Stainless Steel ? No Rust or Corrosion

Description: Minn Kota Fortrex Lock, Height: 2-3/4" - 4-1/2"