462-232-UG1DP Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished). Hole: 2-3/8", OD: 3-3/8", Color: Black Sold: Pack
|
|
462-232-UG2DP Molded of tough, flexible, vinyl. It is designed for multiple uses in boats, such as cable pass thru, landing net holder, fishing rod support or protector, stern light holder or any number of other uses. For bulk head pass-thru, simply mount and run cables, wires, etc. through to prevent chafing. For land nets, fishing rods, stern light or other items, simply mount and insert items to be protected or held in place. To remove items from utility grommet, simply pull. This utility grommet can be used either horizontal or vertical. Install with four (4) pan head screws (not furnished). Hole: 1-3/4", OD: 2-3/4", Color: Black Sold: Pack
|
|
462-232-JPZ6DP "Built with full 1/2" aluminum with an exclusive Z-Lock design for the ultimate in strength and virtually no side slippage or movement, this jack plate handles all V6 outboards up to 300hp. Easily adjustable with a single center bolt adjustment point." Size: 6"
|
|
462-232-LED3906 + Option(s) Lumens: 1320, LED Colors: White,Blue or Green Size: 3-1/2" x 3/4"
- Six (6) High Intensity Super Bright LEDs
- Newest Generation in LED Technology
- Stainless Steel Bezel for Beauty and Durability
- Surface Mount Installation - No Large Holes
- Resists Rust and Corrosion
- 3/8" Hole for Wire
|
|
464-520080-1 T-HANDLE DRAIN PLUG BRASS
Seadog Snap T-Handle Drain Plugs fit 1" drains.
|
|
464-520085-1 T-Handle Drain Plug SS
Seadog Snap T-Handle Drain Plugs fit 1" drains
|
|

462-1-SH5210P
- This helm can be used in a standard configuration with either the SSC134XX single cable or SSC135XX dual cable. It can also be used with the TFXtreme steering cable SSC154XX to create an HPSTM steering system.
- HPS™ Rack by Seastar Solutions is the best 4-turn way to steer a power-assisted sterndrive or outboard! Ideal for small inboards too, HPS reduces backlash (free-play at the wheel) associated with power steered boats by up to 50%!
- A great choice for ski boats, too!
- It replaces most standard Teleflex/Seastar Solutions Rack & Pinion steering without dash modifications. HPS Rack is available in single cable configuration and is for single station use only.
- Four bolts and nuts secure cable's rack housing to helm.
- Dual cable has one rack housing with two cables attached. Single helm works on both single and dual cable applications (NFB recommended for non-power assist).
- Helm/cable install as unit from back of dash
- Helm requires current generation rack cables (will not bolt up to older style cables)
|
|
462-1-SH91610P Back mount single-cable rack & pinion helm. Requires separate tilt mechanism SH91800P. : Sold: Each
|
|
462-354-4208151 Stamped brass and molded bakelite. Amps: 15
|
|
464-420820-1 Circuit Breaker Thermal AC/DC 20A
Seadog Thermal AC/DC Circuit Breakers are constructed of stamped brass with bolded bakelite.
|
|
462-354-4208301 Stamped brass and molded bakelite. Amps: 30
|
|
462-354-4208061 Stamped brass and molded bakelite. Amps: 6
|
|
462-354-4208081 Stamped brass and molded bakelite. Amps: 8
|
|
462-354-4208101 Stamped brass and molded bakelite.
Amps: 10
Sold: Each
|
|
462-354-4208201 Stamped brass and molded bakelite.
Amps: 20
Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> "Type FD (deep). Molded ridge around face further prevents water from getting between box and cover plate. 4-9/16" high x 2-15/16" wide x 3-1/4" deep. Has a 22 cubic inch capacity." Color: Yellow, Cut Out: "Two 3/4" IPS", Material: Thermoplastic Sold: Each
|
|
462-47-3549 Thermostat 120F Description: 120°, Replaces: Mercury/Mercruiser 14586, Fits: Mariner: 6,8,9.9 (2 cyl.) A197112 Later, Sea Pro 10 D038000 Later, 15 (2 cyl.) B292414 Later, 18XD, 20XD, 25XD B114231 Later, 25 ( 2 cyl.) 25 Sea Pro B238464 Later, 30 (2 cyl.) G055314 Later, 45 Jet, 50, 55, 60 (3 cyl.) G290585 Later Mercury: Sea Pro 10 D038000 Later, 15 (2 cyl.) B292414 Later, 18XD, 20XD, 25XD B114231 Later, 25 ( 2 cyl.) 25 Sea Pro B238464 Later, 30 (2 cyl.) G055314 Later, 45 Jet, 50, 55, 60 (3 cyl.) G290585 Later Sold: Each
|
|
462-47-3543 Thermostat 143 Deg -BRP #435491 Replaces: 393659, 434841 378065 508626, 5005440, Application: 143°- 40-250hp E-tech, 6-55hp, CrossV4,V6, 9.9 4troke(1994-01), 15 4Stroke (1994-01) Sold: Each
|
|
462-47-1989 Thermostat Housing Description: Stainless Steel Termostat Housing, Replaces: 861006A, 87290A4 & fits select Marine Power engines Sold: Each
|
|
462-47-3670 Thermostat Kit Description: T-Stat Kit: OMC 140 (1980-81), 2.5l & 3.0l, 1982-88 Sold: Each
|
|