Livorsi Marine

5/16" Cutout LED Warning Light

4 Pin Connector & Wire Harness 18 inch, 3 Pack for Livorsi Single Outboard Engine Gauge Kits

The Plug-In Connector feature which makes Livorsi's new Deutsch gauges unique make installation a breeze, saving you a lot of rigging time & frustration. This 3 pack goes perfectly with one of our Livorsi Engine Gauge Kits.

NOTE: Connectors sold separately from gauges. Most Livorsi Gauges except GPS Speedos and Mechanical Gauges will require this connector!

4 Pin Connector & Wire Harness 18 inch, 5 Pack for Livorsi Gauge Kits

The Plug-In Connector feature which makes Livorsi's new Deutch gauges unique make installation a breeze, saving you a lot of rigging time & frustration. This 5 pack goes perfectly with one of our Livorsi Gauge Kits.

NOTE: Connectors sold separately from gauges. Most Livorsi Gauges except GPS Speedos and Mechanical Gauges will require this connector!

4 Pin Connector & Wire Harness 18 inch, 9 Pack for Livorsi Dual Engine Gauge Kits

The Plug-In Connector feature which makes Livorsi's new Deutsch gauges unique make installation a breeze, saving you a lot of rigging time & frustration. This 9 pack goes perfectly with one of our Livorsi Dual Engine Gauge Kits.

NOTE: Connectors sold separately from gauges. Most Livorsi Gauges except GPS Speedos and Mechanical Gauges will require this connector!

High Vibration Electric Fuel Pressure Sender
0-100 PSI, Autometer or Livorsi Gauges

Quite possibly one of the most important things to monitor while making those high speed runs. Everyone knows fuel pressure is critical so always run the correct senders to watch your gauge. All senders are 1/8" NPT.

High Vibration Electric Fuel or Water Pressure Sender
0-15 PSI, Autometer or Livorsi Gauges

Quite possibly one of the most important things to monitor while making those high speed runs. Everyone knows fuel pressure is critical so always run the correct senders to watch your gauge. All senders are 1/8" NPT.

LED Lights for Livorsi Gauges, Wedge Style. 12.8v. LED lights outshine and outlast incandescent bulbs. NOTE: These do not work with standard DC/DCS 2-1/16" or 2-5/8" gauges. On those gauges the led is soldered to the circuit board. These lights only work on Tachs and Speedos.

These rocker style switches offer the latest in modern styling. Each switch is both dust and moisture protected. This switch is designed to snap into a .830" x 1.450" rectangular hole and is rated at 20 amps. These switches use heavy duty 1/4" connectors.

These rocker style switches offer the latest in modern styling. Each switch is both dust and moisture protected. This switch is designed to snap into a .830" x 1.450" rectangular hole and is rated at 20 amps. These switches use heavy duty 1/4" connectors.

These rocker style switches offer the latest in modern styling. Each switch is both dust and moisture protected. This switch is designed to snap into a .830" x 1.450" rectangular hole and is rated at 20 amps. These switches use heavy duty 1/4" connectors.

Livorsi 2-1-16" Fuel Pressure Gauge 0-100 PSI, Mechanical, Industrial Series 

Livorsi Marine's brand new line of Industrial Series gauges featuring SAE Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 3-3/8" that you can mix & match to create a custom look. These gauges feature SAE stepped rims. Click here to see a comparison on rim types.

Livorsi Marine gauges are now easier than ever to install!  The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion.  All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Industrial Series gauges are only available in Standard sizes.

Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".

NOTE:  Required DCH connectors are sold separately and will be added to your order along with the gauge.

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-1-16" Fuel Pressure Gauge 0-100 PSI, Mechanical, Mega & Race Series 

Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims.  The Mega rim has a bold strong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat.  The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.

All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes.  Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs!  Create the look you want, with the gauges you want.

Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-5/8" Fuel Pressure Gauge 0-100 PSI, Mechanical, Mega & Race Series 

Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims.  The Mega rim has a bold strong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat.  The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.

All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes.  Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs!  Create the look you want, with the gauges you want.

Overall gauge width is 2-3/4" and dash cutout size is 2-5/8".

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-1-16" Oil Pressure Gauge 0-100 PSI, Mechanical, Industrial Series 

Livorsi Marine's brand new line of Industrial Series gauges featuring SAE Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 3-3/8" that you can mix & match to create a custom look. These gauges feature SAE stepped rims. Click here to see a comparison on rim types.

Livorsi Marine gauges are now easier than ever to install!  The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion.  All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Industrial Series gauges are only available in Standard sizes.

Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".

NOTE:  Required DCH connectors are sold separately and will be added to your order along with the gauge.

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-1-16" Oil Pressure Gauge 0-100 PSI, Mechanical, Mega & Race Series 

Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims.  The Mega rim has a bold strong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat.  The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.

All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes.  Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs!  Create the look you want, with the gauges you want.

Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-5/8" Oil Pressure Gauge 0-100 PSI, Mechanical, Mega & Race Series 

Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims.  The Mega rim has a bold strong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat.  The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.

All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes.  Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs!  Create the look you want, with the gauges you want.

Overall gauge width is 2-3/4" and dash cutout size is 2-5/8".

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-5/8" 0-100 PSI Oil Pressure, Electric, Mega & Race Series with Plug-In Connectors 

Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims.  The Mega rim has a bold strong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat.  The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.

Livorsi Marine gauges are now easier than ever to install!  The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion.  All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes.  Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs!  Create the look you want, with the gauges you want.

Overall gauge width is 2-3/4" and dash cutout size is 2-5/8"

NOTE:  Required DCH connectors are sold separately and will be added to your order along with the gauge.

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-1/16" Fuel Pressure Gauge 0-15 PSI, Mechanical, Industrial Series 

Livorsi Marine's brand new line of Industrial Series gauges featuring SAE Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 3-3/8" that you can mix & match to create a custom look. These gauges feature SAE stepped rims. Click here to see a comparison on rim types.

Livorsi Marine gauges are now easier than ever to install!  The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion.  All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Industrial Series gauges are only available in Standard sizes.

Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".

NOTE:  Required DCH connectors are sold separately and will be added to your order along with the gauge.

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Livorsi 2-1/16" Fuel Pressure 0-15 PSI, Electric, Mega & Race Series with Plug-In Connectors 

Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors.  This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims.  The Mega rim has a bold strong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat.  The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.

Livorsi Marine gauges are now easier than ever to install!  The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion.  All Livorsi gauges are encased in all non-ferrous hardware.  These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes.  Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs!  Create the look you want, with the gauges you want.

Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".

NOTE:  Required DCH connectors are sold separately and will be added to your order along with the gauge.

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!