This Part has options, please click the button below to order.
730-DCFL + Option(s) Livorsi 2-5/8" Fuel Level Gauge 240-33 Ohms, Electric, Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/4" and dash cutout size is 2-5/8".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-GPSS + Option(s) Livorsi Standard 3-3/8" Mega or Race Series GPS Speedometer
- GPS satellite guided analog speedometer
- Provides accuracy with no needle bounce
- No pitot tube needed
- Memory recall retains highest speed
- Accurate readings on stepped or ventilated bottoms
- Connects to the output of some GPS antenna/receivers
- Choose Gauge & Harness Only if you have a receiver or a full kit if you need it all
- Kits include speedometer, compact antenna/receiver, memory recall and harness
- Available in 3 3/8" or 4 5/8" cutouts
- Black, white, platinum or carbon fiber dials
- Choose from eleven rim colors
- Click here to see a comparison on rim types
- Overall gauge width is 3-3/4" and the dash cutout size is 3-3/8"
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-GPSL + Option(s) Livorsi Monster 4-5/8" Mega or Race Series GPS Speedometer
- GPS satellite guided analog speedometer
- Provides accuracy with no needle bounce
- No pitot tube needed
- Memory recall retains highest speed
- Accurate readings on stepped or ventilated bottoms
- Connects to the output of some GPS antenna/receivers
- Choose gauge only or full kit
- Kits include speedometer, compact antenna/receiver, memory recall and harness
- Available in 3 3/8" or 4 5/8" cutouts
- Black, white, platinum or carbon fiber dials
- Choose from eleven rim colors
- Click here to see a comparison on rim types
- Overall gauge width is 5" and the dash cutout size is 4-5/8"
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-GPSSO + Option(s) Livorsi Standard 3-3/8" Mega or Race Series GPS Speedometer with Odometer Kit
This stand alone GPS speedometer is a digital gauge with an analog readout and a built in LCD odometer. Designed to be hassle free, this gauge relies on GPS satellite signals to display accurate speed and miles traveled, so there is no need to calibrate this gauge with gear ratios or tire size.
- Eliminates the need for cables
- No calibration required
- LCD displays odometer and 3 resettable trip odometers
- 10x update for real-time readings
- 120 MPH or 160 MPH
- Dials: black, platinum or white
- Complements Livorsi Vantage View and Mega/Race Series Gauges
This kit includes:
- one gauge
- GPS antenna model# GPSSQ310X
- 1 switch
- 1 harness
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-GPSLO + Option(s) Livorsi Standard 4-5/8" Mega or Race Series GPS Speedometer with Odometer Kit
This stand alone GPS speedometer is a digital gauge with an analog readout and a built in LCD odometer. Designed to be hassle free, this gauge relies on GPS satellite signals to display accurate speed and miles traveled, so there is no need to calibrate this gauge with gear ratios or tire size.
- Eliminates the need for cables
- No calibration required
- LCD displays odometer and 3 resettable trip odometers
- 10x update for real-time readings
- 120 MPH or 160 MPH
- Dials: black, platinum or white
- Complements Livorsi Vantage View and Mega/Race Series Gauges
This kit includes:
- one gauge
- GPS antenna model# GPSSQ310X
- 1 switch
- 1 harness
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-HM + Option(s) Livorsi 2-1/16" Hourmeter Gauge, Electric, Mega & Race Series
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
All Livorsi gauges are encased in all non-ferrous hardware. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".
NOTE: This gauge does not require the DCH plug that standard Mega an Race Series Gauges use.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCSOT + Option(s) LLivorsi 2-1/16" Oil Temperature 140-340° F, Electric, Industrial Series with Plug-In Connectors
Livorsi Marine's brand new line of Industrial Series gauges featuring SAE Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 3-3/8" that you can mix & match to create a custom look. These gauges feature SAE stepped rims Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Industrial Series gauges are only available in Standard sizes.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCSOT + Option(s) Livorsi 2-1/16" Oil Temperature 140-340° F, Electric Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCOT + Option(s) Livorsi 2-5/8" Oil Temperature 140-340° F, Electric, Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/4" and dash cutout size is 2-5/8".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-STMM22 + Option(s) Livorsi Marine Standard Four Handle Throttle / Shifter Controls
All Livorsi Shifter are made to order and take 3-4 weeks to build!
- Four Handle version measures 5-17/32" Wide x 7-3/4" Long x 8-1/8" Deep.
- Made of Billet Aluminum and Stainless Steel
- Enclosed Wiring in the Handle
- Flat Base Plate standard, or optional contour plate available.
- Adjustable Lever Resistance while still installed
- Available with Bent Handles only.
- Optional Base Plate bezels are available separately.
- Uses 33C or 43C Cables.
If you need assistance in configuring your controls, give our tech staff a call and we can help walk you through it.
Bravo Shift Cable Adjustment Guidance
|
|
This Part has options, please click the button below to order.
730-STMM33 + Option(s) Livorsi Marine Standard Six Handle Throttle / Shifter Controls
All Livorsi Shifter are made to order and take 3-4 weeks to build!
- Six Handle version measures 7-9/16" Wide x 7-3/4" Long x 8-1/8" Deep.
- Made of Billet Aluminum and Stainless Steel
- Enclosed Wiring in the Handle
- Flat Base Plate standard, or optional contoured plate available.
- Adjustable Lever Resistance while still installed
- Available with Bent Handles only.
- Optional Base Plate bezels are available separately.
- Uses 33C or 43C cables
If you need assistance in configuring your controls, give our tech staff a call and we can help walk you through it.
Bravo Shift Cable Adjustment Guidance
|
|
This Part has options, please click the button below to order.
730-STMM11 + Option(s) Livorsi Marine Standard Two Handle Throttle / Shifter Controls
All Livorsi Shifter are made to order and take 3-4 weeks to build!
- Two Handle version measures 3-11/32" Wide x 7-3/4" Long x 8-1/8" Deep.
- Made of Billet Aluminum and Stainless Steel
- Enclosed Wiring in the Handle
- Flat Base Plate standard, or optional contour base plate available.
- Adjustable Lever Resistance while still installed
- Available with Bent Handles only.
- Optional Base Plate bezels are available separately.
- Uses 33C or 43C Cables
If you need assistance in configuring your controls, give our tech staff a call and we can help walk you through it.
Bravo Shift Cable Adjustment Guidance
|
|
This Part has options, please click the button below to order.
730-DCSTT + Option(s) Livorsi 2-1/16" Transmission Temperature 140-340° F, Electric Industrial Series with Plug-In Connectors
Livorsi Marine's brand new line of Industrial Series gauges featuring SAE Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 3-3/8" that you can mix & match to create a custom look. These gauges feature SAE stepped rims. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Industrial Series gauges are only available in Standard sizes.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCSTT + Option(s) Livorsi 2-1/16" Transmission Temperature 140-340° F, Electric Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCTT + Option(s) Livorsi 2-5/8" Transmission Temperature 140-340° F, Electric, Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/4" and dash cutout size is 2-5/8".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCSTMM + Option(s) Livorsi 2-1/16" Trimmeter, Mercury & Yamaha 10-90 ohms, Electric, Industrial Series with Plug-In Connectors
Livorsi Marine's brand new line of Industrial Series gauges featuring SAE Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 3-3/8" that you can mix & match to create a custom look. These gauges feature SAE stepped rims. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Industrial Series gauges are only available in Standard sizes. Only works with 2 wire trim senders, does not work with 3 wire senders.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCSTMM + Option(s) Livorsi 2-1/16" Trimmeter, Mercury & Yamaha 10-90 ohms, Electric, Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16". Only works with 2 wire trim senders, does not work with 3 wire senders.
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCTMM + Option(s) Livorsi 2-5/8" Trimmeter, Mercury & Yamaha 10-90 ohms, Electric, Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/4" and dash cutout size is 2-5/8". Only works with 2 wire trim senders, does not work with 3 wire senders.
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCSTMO + Option(s)
Livorsi 2-1/16" Trimmeter, OMC 88-1 ohms, Electric, Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/8" and dash cutout size is 2-1/16".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|
This Part has options, please click the button below to order.
730-DCTMO + Option(s) Livorsi 2-5/8" Trimmeter, OMC 88-1 ohms, Electric, Mega & Race Series with Plug-In Connectors
Livorsi Marine's brand new line of performance gauges featuring the new Mega & Race Rims with Plug-In Connectors. This new series is a whole new family of gauges from 2" to 5" that you can mix & match to create a custom look. These gauges feature newly designed rims. The Mega rim has a bold strong look, making your gauges standout. It has less height to the rim,giving it higher visibility from an angle, an important factor when operating your boat. The Race rim has a sleek look, that make your gauges stand out. Click here to see a comparison on rim types.
Livorsi Marine gauges are now easier than ever to install! The Plug-In feature on these instruments significantly decreases rigging time. The DCH plug-in connectors are waterproof and resist salt corrosion. All Livorsi gauges are encased in all non-ferrous hardware. These gauges include state-of-the-art red L.E.D. lights, for easy viewing in low light conditions. Mega & Race gauges are available in Standard or Monster sizes. Have freedom with this new series, mix and match 2-1/16" with 2-5/8" and 3-3/8" or 4-5/8" speedos and tachs! Create the look you want, with the gauges you want.
Overall gauge width is 2-3/4" and dash cutout size is 2-5/8".
NOTE: Required DCH connectors are sold separately and will be added to your order along with the gauge.
ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.
Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!
|
|