Livorsi Marine

Anchor Buddy Anchor Line

• Stretches from 14 to 50 feet
• Takes the shock out of your anchor line
• Makes it much easier to anchor offshore
• Also works great for anchoring in rough water

Anchor Buddy takes the shock out of your anchor line and makes it much easier to anchor offshore. Simply drop anchor about 30' out and proceed to shore; Anchor Buddy stretches, while your anchor stays set. As you pay out your bow line, Anchor Buddy retracts, anchoring your boat safely offshore. Stretches from 14' to 50'.

4 Pin Connector & Wire Harness 18 inch

The Plug-In Connector feature which makes Livorsi's new Deutch gaugesuniquemake installation a breeze, saving you a lot of rigging time &frustration.

NOTE: Connectors sold separately from gauges. Most Livorsi Gauges except GPS Speedos and Mechanical Gauges will require this connector!

• Oversized Loops
• Made of Water resistant polyprolene
• Extremely Flexible & Resists Knotting
• Will not Mildew
• Floats
• Available in 15 and 20 foot lengths

NEW OLD STOCK, SOLD AS IS NO RETURNS

High Temperature Sender 1 / 4" NPT. 5 available.

LED Pop-up Bow Light Cup

Livorsi 16"L X 12"W 750 Series Trim Tabs

• Available in 11 powder coat colors and private labeling
• Mil-Spec hard coat anodized topped with a powder coat finish to prevent corrosion
• Models are available for performance boats, center consoles, cruisers, run-abouts, workboats and military boats
• For use on boats 20 - 50 feet
• Choose between LED electronic position indication (plug and play) or mechanical position indication (uses 33C cables)
• Electronic models are compatible with NMEA 2000® compliant systems and Mercury VesselView®
• The electronic IP68 sensor plugs directly to Livorsi's LED Position Indicator
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Bolt patterns include Mercury and a smaller Livorsi bolt pattern for center consoles
• All hinge pins and hardware are stainless steel
• Adjustable transom angles without the use of special tools
• Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals
• These cylinders may be serviced
• Five anodes for complete saltwater protection

These kits Include:

• Two billet tabs
• Two pumps
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

Livorsi 13.5" wide x 15.5" long 850 Series Trim Tabs

• Available in 11 powder coat colors and private labeling
• Mil-Spec hard coat anodized topped with a powder coat finish to prevent corrosion
• Models are available for performance boats, center consoles, cruisers, run-abouts, workboats and military boats
• For use on boats 20 - 50 feet
• Choose between LED electronic position indication (plug and play) or mechanical position indication (uses 33C cables)
• Electronic models are compatible with NMEA 2000® compliant systems and Mercury VesselView®
• The electronic IP68 sensor plugs directly to Livorsi's LED Position Indicator
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Livorsi bolt pattern for center consoles
• All hinge pins and hardware are stainless steel
• Adjustable transom angles without the use of special tools
• Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals
• These cylinders may be serviced
• Five anodes for complete saltwater protection

These kits Include:

• Two billet tabs
• Two pumps
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

Livorsi 14" wide (9.25" wide at end of tab) x 19" long 950 Series Trim Tabs

• Available in 11 powder coat colors and private labeling
• Mil-Spec hard coat anodized topped with a powder coat finish to prevent corrosion
• Models are available for performance boats, center consoles, cruisers, run-abouts, workboats and military boats
• For use on boats 20 - 50 feet
• Choose between LED electronic position indication (plug and play) or mechanical position indication (uses 33C cables)
• Electronic models are compatible with NMEA 2000® compliant systems and Mercury VesselView®
• The electronic IP68 sensor plugs directly to Livorsi's LED Position Indicator
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Bolt patterns include Mercury and a smaller Livorsi bolt pattern for center consoles
• All hinge pins and hardware are stainless steel
• Adjustable transom angles without the use of special tools
• Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals
• These cylinders may be serviced
• Five anodes for complete saltwater protection

These kits Include:

• Two billet tabs
• Two pumps
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

Livorsi 15" wide x 24" long 1100 Series Trim Tabs

• These tabs are suitable for Catamaran Tunnel Tabs, Heavy Cruisers, Performance Boats, Workboats & Military Boats
• Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals
• Electronic 5V sender can read position on Livorsi LED Indicator or NMEA2000 devices with gateway
• Available with optional 4” , 6” or 10” LED lights in white, blue, red, green or RGB
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Five anodes for complete saltwater protection
• All hinge pins and hardware are stainless steel
  
• Adjust transom angles without the use of special tools
• Standard equipment in Contender, Yellowfin, Intrepid, Fountain, Donzi, Blackwater, Deep Impact, Renegade, SeaVee, Military and many others

These kits Include:

• Billet tab(s)
• Pump(s)
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

Livorsi 16.5" wide x 30" long 1850 Series Trim Tabs

• Help boats plane out quickly
• Significantly limits bow rise
• The built-in electronic position sensor is compatible with N2K displays & Livorsi LED Indicator
• Made with billet aluminum, anodized & painted construction
• 100% made in the USA
• 1650’s and 1850’s are stepped bottom tabs that provide less drag in the water
• Available in 11 powder coat colors & with private labeling
• Optional 4” or 6” LED lights in white, blue, red, or green.
• For use on boats 20 – 50 feet
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Five anodes for complete saltwater protection
• All hinge pins and hardware are stainless steel
• Adjust transom angles without the use of special tools
• Hydraulic cylinders designed for 1200 PSI working pressure with dual seals, cylinders may be serviced
• Plug and play LED electronic position indicators

These kits Include:

• Billet tab(s)
• Pump(s)
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

Livorsi 18.5" wide x 30" long 1850 Series Trim Tabs

• Help boats plane out quickly
• Significantly limits bow rise
• The built-in electronic position sensor is compatible with N2K displays & Livorsi LED Indicator
• Made with billet aluminum, anodized & painted construction
• 100% made in the USA
• 1650’s and 1850’s are stepped bottom tabs that provide less drag in the water
• Available in 11 powder coat colors & with private labeling
• Optional 4” or 6” LED lights in white, blue, red, or green.
• For use on boats 20 – 50 feet
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Five anodes for complete saltwater protection
• All hinge pins and hardware are stainless steel
• Adjust transom angles without the use of special tools
• Hydraulic cylinders designed for 1200 PSI working pressure with dual seals, cylinders may be serviced
• Plug and play LED electronic position indicators

These kits Include:

• Billet tab(s)
• Pump(s)
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

Livorsi 21" X 10" 1050 Series Trim Tabs

• Available in 11 powder coat colors and private labeling
• Mil-Spec hard coat anodized topped with a powder coat finish to prevent corrosion
• Models are available for performance boats, center consoles, cruisers, run-abouts, workboats and military boats
• For use on boats 20 - 50 feet
• Choose between LED electronic position indication (plug and play) or mechanical position indication (uses 33C cables)
• Electronic models are compatible with NMEA 2000® compliant systems and Mercury VesselView®
• The electronic IP68 sensor plugs directly to Livorsi's LED Position Indicator
• Tabs are CNC machined from billet aluminum, no casting
• Tabs are Mil-Spec hard coat anodized to prevent corrosion
• Bolt patterns include Mercury and a smaller Livorsi bolt pattern for center consoles
• All hinge pins and hardware are stainless steel
• Adjustable transom angles without the use of special tools
• Hydraulic cylinders are designed for 1500 PSI working pressure with dual seals
• These cylinders may be serviced
• Five anodes for complete saltwater protection

These kits Include:

• Two billet tabs
• Two pumps
• Mounting hardware
• Harnesses
• Thru hull fittings
• Stainless steel braided hoses and trim switches are purchased separately.
  Four hoses are needed for one kit, two per cylinder.

Replacement Transducer for Livorsi DFG series Depth Sounders. Works in either Shoot-Thru or Transom Mount applications. Includes epoxy for Shoot Thru mount. Only for use with Livorsi DFG series or equivalent Hawkeye D10D model Depth Sounders. This kit is the same at 730-TTR, it just includes epoxy, which the TTR kit does not.

Livorsi Marine's brand new line of performance gauges featuring the new Mega& Race Rims with Plug-In Connectors.  This new series is a whole new familyof gauges from 2" to 5" that you can mix & match to create a custom look.

Livorsi Marine gauges are now easier than ever to install!  The Plug-Infeature on these instruments significantly decreases rigging time.  Theplug-in connectors are waterproof and resist salt corrosion.  Gauges areencased in all non-ferrous hardware.  These gauges include state-of-the-artL.E.D. lighting, for easy viewing in low light conditions.

These gauges feature newly designed rims.  The Mega rim has a boldstrong look, making your gauges standout.  It has less height to the rim,giving it higher visibility from an angle, an important factor when operatingyour boat.  The Race rim has a sleek look, that make your gauges standout.

Overall gauge width is 3-3/4" and dash cutout size is 3-3/8".

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!

Convert your electronic automotive speedometer into a GPS speedometer with this GPS Pulse Antenna. The antenna receives GPS satellite signals and outputs the information to 8,000 or 16,000 pulse signal to your existing speedometer. This antenna eliminates connections to the transmission or the need to calibrate to your vehicles tire size.

This fast update antenna receives signals 10Hz (10 per second) driving your speedometer to display your true speed (no pointer lag). This antenna is a stand alone device, which does not require a membership fee for GPS service. The antenna can be mounted under the dash or in an other hidden area as long as you verify the speedometer is working properly before permanently mounting the antenna.

Accuracy and ease of installation makes this GPS Pulse Antenna an affordable solution if you are looking to upgrade to a GPS speedometer system.Convert your electronic automotive speedometer into a GPS speedometer with this GPS Pulse Antenna. The antenna receives GPS satellite signals and outputs the information to 8,000 or 16,000 pulse signal to your existing speedometer. This antenna eliminates connections to the transmission or the need to calibrate to your vehicles tire size.

This fast update antenna receives signals 10Hz (10 per second) driving your speedometer to display your true speed (no pointer lag). This antenna is a stand alone device, which does not require a membership fee for GPS service. The antenna can be mounted under the dash or in an other hidden area as long as you verify the speedometer is working properly before permanently mounting the antenna.

Accuracy and ease of installation makes this GPS Pulse Antenna an affordable solution if you are looking to upgrade to a GPS speedometer system.

Standard 1-second 1 HZ update with 4 ft harness and ring terminals,2 3/4" L x 2 3/8" W x 7/8" H. This receiver is used on Livorsi GPS gauges made prior to July 2015.

We've decided to take some of the guess work our of your next gauge set purchase. By combining the nine most popular gauges we are able to offer you the very best gauges at the very best value. The industrial series gauges are only available in the Standard size. The Industrial Series is characterized by the SAE Rim. Industrial Gauges are only available in Standard Sizes

Gauge sets include:

• (2) 3-3/8" 6000 RPM Tachometer
• (2) 2-1/16" Oil Pressure
• (2) 2-1/16" Water Temperature
• (1) 2-1/16" Fuel Level
• (2) 2-1/16" Voltmeter

Note:  Plug-In Connectors are sold separately.

ALL LIVORSI GAUGES ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 2-3 WEEKS.

These gauges are available with a WHITE or BLACK face, and WHITE, BLACK or STAINLESS STEEL rims.

Need help measuring your gauges so you know what to look for when you finally upgrade to a more polished set? Check out this handy tutorial!