Hardin Marine

• Replaces Mercury OEM #32-842756005
• Made in the USA
• SOLD PER FOOT
• Available in Black only.

This Replacement Hose for Mercury #32-842756005 HOSE fits the following models:

• Mercury Outboard 200HP 200HP 1B912786 & Up BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI Pro XS 1B752547 THRU 2B535608 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 0T997974 THRU 1E000796 BOTTOM COWL
• Mercury Outboard 300HP 300HP DFI XS 1E052058 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP DFI 1B504989 THRU 1B912785 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Pro XS 1B426561 THRU 1B752546 BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI 1B504989 THRU 2B535086 BOTTOM COWL
• Mercury Outboard 300HP 300HP DFI XS 1E001867 THRU 1E052057 BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI Sport XS 1E002584 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP Pro XS 1B912786 & Up BOTTOM COWL
• Mercury Outboard 250HP 250HP 1B528615 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP DFI 1B912786 THRU 2B535571 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI 1B528615 THRU 2B535086 BOTTOM COWL
• Mercury Outboard 200HP 200HP DFI Pro XS 1B504989 THRU 1B912785 BOTTOM COWL
• Mercury Outboard 250HP 250HP 1E003046 & Up BOTTOM COWL
• Mercury Outboard 200HP 200HP Pro XS 1B912786 THRU 2B535571 BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI XS 1E002584 & Up BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Sport XS 1E051824 THRU 1E052994 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 1E002342 THRU 1E051113 BOTTOM COWL
• Mercury Outboard 175HP 175HP DSI 1E052967 & Up BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI Sport XS 1E000797 THRU 1E002583 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Pro XS 1B752547 THRU 2B535608 BOTTOM COWL
• Mercury Outboard 250HP 250HP Pro XS 1B752547 & Up BOTTOM COWL
• Mercury Outboard 225HP 225HP DFI 1B426561 THRU 1B752546 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 1E053158 & Up BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI Sport XS 1E002342 THRU 1E051823 BOTTOM COWL
• Mercury Outboard 225HP 225HP Pro XS 1B426561 THRU 1B752546 BOTTOM COWL
• Mercury Outboard 250HP 250HP DFI XS 1E000797 THRU 1E002341 BOTTOM COWL

200 Foot Pound Bottom Mount Starter - Fits 455 Olds Engines

This is the best choice for highly modified engines or where heat soak or space limitation is a concern. 200 lbs. of torque. 4.4:1 gear reduction ratio. Cranking power for up to 18:1 compression. Machined Billet Block Adapter, Clears Most Oil Pans.

USCG Approved (SAE J1171)

200 Foot Pound Bottom Mount Starter - Fits Both Small & Big Block Chevy Engines

This is the best choice for highly modified engines or where heat soak or space limitation is a concern. 200 lbs. of torque. 4.4:1 gear reduction ratio. Cranking power for up to 18:1 compression. Machined Billet Block Adapter, Clears Most Oil Pans.

USCG Approved (SAE J1171)

Bottom Mount 200 Foot Pound Starter - Fits ford 460 Engines

Features:
• Bottom Mount
• 164 Tooth

USCG Approved (SAE J1171)

2-1/2" to 3" I.D. External Salisbury Flapper

These are excellent American-made flaps that will not curl like cheap import copies. These are a must for boats with a very close distance between exhaust ports and the water line Clamp is included. This flap has a 3" ID and must be cut down for 2-1/2" applications. Sold each.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 250 square inches of lift surface.
• Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
• Includes trim pumps (137-8021) with bulkhead brackets.
• Includes Trim Hoses
• Includes Trim Switch Panel.
• For Boats 25-40 Ft.
• Black Standard Color
• Custom Colors Available may take up to 6 weeks (Call for options or color choices not shown)
• NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
• NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 250 square inches of lift surface.
• For Boats 25-40 Ft.
• Black Standard Color
• Custom Colors Available may take up to 2 weeks (Call for options)
• NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
• NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 250 square inches of lift surface.
• Includes trim pumps (137-8200) and bulkhead brackets.
• Includes Trim Hoses
• Includes Trim Switch Panel.
• For 25-40 Ft. Boat Lengths
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.
• Black Standard Color
• Custom Colors Available may take up to 6 weeks (Call for options or colors not shown)

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 250 square inches of lift surface.
• ONE PORT Trim Tab Only, kit comes as shown.
• For 25-40 Ft. Boat Lengths
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 250 square inches of lift surface.
• ONE StarboardTrim Tab Only, kit comes as shown.
• For 25-40 Ft. Boat Lengths
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 250 square inches of lift surface.
• Trim Tabs Only, kit comes as shown.
• For 25-40 Ft. Boat Lengths
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.

Powdercoated 22mm (7/8") Bezel, fits 22MM LED Push Button Switches (See Related Parts). 7/8" I.D, 1-3/8" O.D

See what each of our powder-coated finishes (both flat and glossy) look like under different lighting here!

• 24" Stroke.
• Overall Length Closed is 31-1/4".
• Strong eyelet mount allows a wide range of angles for easy installation.
• Marine grade stainless steel housing
• Sealed precision die cast housing.
• 12 VDC
• Safe working dynamic load limit of 400 lbs.*
• Static Limit of 500 lbs.*
• Heavy duty, sealed ball bearing motor allows for locking of hatches, won’t open at high speeds
• Replaces Livorsi SSA24 actuator.
• NOTE: Please verify your dimensions. Actuators that have been installed are NON returnable!

*Static loading refers to the load on an actuator when it is in a fixed or stationary condition. The static load capacity of an actuator refers to how much weight the actuator can safely hold without back driving or causing damage. Dynamic load is the load the actuator sees when it is powered and extending or retracting. The dynamic load capacity of an actuator refers to how much the actuator can push or pull. Placing an actuator closer to the hatch hinge point will require the actuator to work harder than installing it further out.

24 Volt 3-Wire Trim Pump Motor

We carry a selection of new trim pumps for your outdrives, trim tabs and hatch rams. Floor mount trim pump for the stock stern drive package and high performance mount for the offshore racer. We also stock new replacement reservoir tanks and electric trim motors for replacement. These are what the factory uses, just not the factory price.

• Marine grade stainless steel & aluminum construction.
• 12 DC sealed electric motors, 2-wire simple hook-ups.
• Compact Size, Light Weight, for Maximum Lifting Capacity.
• Two Standard Length Cylinders with Simple Pin Mounts.
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer.
• Smooth Quiet Responsive Hydraulic Action with No-Coasting.
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250 lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free.
• Operating Temperatures 10 to 165 Degrees F.
• System can Operate with Environmentally Responsible Fluid.
• 24" Model Dimensions: 32” Retracted Length, 56” Extended Length.
• NOTE: The 620-920016 is only bracket that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

25 Foot Nylon 1/8" Hose Kit - Used with Mechanical Boost or Oil Pressure Senders & Gauges

25' Replacement Inner Cable Kit

Includes 25' braided cable, spring, guides and ends. Replaces cables on both new N-Control Foot Throttles or older In-Control Foot Throttles.

This hose allows you to make only very slight bends due to its corrugated design used in extreme-duty applications. It has a reinforcing wire threaded through the wall to increase strength.

All exhaust hose is sold by the inch, i.e add quantity of 24 for 24 in. (2 ft.) of hose.

This hose allows you to make only very slight bends due to its hardwall design used in extreme-duty applications. It looks exactly like the softwall hose except it has a reinforcing wire threaded through the wall to increase strength.

All exhaust hose is sold by the inch, i.e add quantity of 24 for 24 in. (2 ft.) of hose.

This is top quality soft wall exhaust hose It's pliable construction makes it easier to work with than hard wall hose.

All exhaust hose is sold by the inch, i.e add quantity of 24 for 24 in. (2 ft.) of hose.

Hose comes in maximum of 12.5 feet sections. Please specify if you want sections cut into specific lengths when ordering over 12 feet.

• Constructed of Polished Stainless Steel.
• Directly replace old aluminum tips.
• Includes rubber flap and steel mounting hardware with these tips.
• Sold Individually.
• 2-7/8" hose.
• 4.093" Bolt Circle

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 300 square inches of lift surface.
• Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
• Includes trim pumps (137-8023) with bulkhead brackets.
• Includes Trim Hoses
• Includes Trim Switch Panel.
• For 25-40 Ft. Boat Lengths
• 85 lb. box, 36x16x12.
• Black Standard Color
• Custom Colors Available may take up to 6 weeks (Call for options or color choices not shown)
• NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
• NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Includes Electronic Sensors for the Mayfair LED Trim Indicator Systems
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 300 square inches of lift surface.
• For 25-40 Ft. Boat Lengths
• 85 lb. box, 36x16x12.
• Black Standard Color
• Custom Colors Available may take up to 2 weeks (Call for options)
• NOTE: In order to complete this system to your Garmin, or other Smartcraft / NMEA2000 compatible screen you must purchase the 137-8659 adapter box.
• NOTE: If not using a Smartcraft / NMEA2000 type screen display above, you must purchase a corresponding Mayfair Indicator System to display the position readout from your trim tabs.

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 300 square inches of lift surface.
• Includes trim pumps with bulkhead brackets.
• Includes Trim Hoses
• Includes Trim Switch Panel.
• For 25-40 Ft. Boats
• 85 lb. box, 36x16x12.
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.
• Black Standard Color
• Custom Colors Available may take up to 6 weeks (Call for options or color choices not shown)

• Made from high strength 535 Aluminum Magnesium alloy.
• All 316 Stainless Steel hardware.
• 1-1/2" Piston bore.
• Two way hydraulics for improved performance.
• Zinc Anodes to prevent corrosion.
• Over 300 square inches of lift surface.
• For 25-40 Ft. Boats
• Includes installation hardware for a 33c cable, for mechanical trim indicator systems.