Hardin Marine

Y-Pipe E Cover Plate

This cover plate is used when you remove the Y-pipe assembly and need to cover the exhaust port that has been left exposed. These are stainless steel cover plates, not aluminum units. Designed to last a lifetime.

Aluminum Engine Mount Rails

Kit includes pair of 1/4 inch thick rails measuring 3" wide x 5" tall x 8" long. You can use either the 3" side or 5" side as the top. Includes hardware as shown.

This is kit includes a Big Block Chevy front motor mount plate, a pair of mounting feet and two mounting rails and all hardware needed. Ideal for jet boat set ups where the rear of the engine is mounted on the jet pump. Will work for other applications as well.

Made from 3/8" thick 6061-T6 Aluminum that can be easily polished or anodized to match your existing hardware. Left oversized to fit any application or accessories. Has 4x 1/2" mounting holes and timing cover cutout. Approx. size 26" wide x 11-7/8" tall x 3/8" thick.

Made from 3/8" thick 6061-T6 Aluminum that can be easily polished or anodized to match your existing hardware. Left oversized to fit any application or accessories. Has 7x mounting holes, crank and starter hole. Approx. size 28" wide x 16" tall x 3/8" thick

• NEW 12V 3-Wire Motor/Reservoir/Pump for Mayfair Trim Tabs
• Pump has a gear set that produces Low Flow Rate with High PSI
• Pump can be also be used to drive K-Plane Trim Tabs
• Supplied with Right Side Fill Reservoir
• No bracket included.
• Uses 10w30 oil

• NEW 24V 3-Wire Motor/Reservoir/Pump for Mayfair Trim Tabs
• Pump has a gear set that produces Low Flow Rate with High PSI
• Pump can also be used to drive K-Plane Trim Tabs
• Supplied with Right Side Fill Reservoir
• No bracket included.
• Uses 10w30 oil

Delco Style Alternator, Serpentine, 12V, 70-AMP

• NEW 12V, 70-AMP
• Fits Pleasurecraft
• 2" Mounting Foot
• Includes 50mm Serpentine Pulley

Mercury Trim Tac Actuator Kit, Post 11/2004 (Pair)

• Stainless Steel cover for 33C cables or 1/4" speedometer hose
• These covers are available in polished or powder-coated
• Overall length is 3 1/2", mounting holes are 1-7/8" on center.

Tie bars take 7-10 days to build and are NON-RETURNABLE

Hardin Marine Water or Oil Temperature Sender - 2019 and Later Model Gauges
1/8" NPT sender with 1/4", 3/8" and 1/2" NPT bushing kit, Oil and Water Temp Sender

These electric temperature senders feature a brass non-corrosive body that allows the sender to transfer temperature extremely accurately. These senders include bushing kits to fit multiple size applications.

High Vibration Electric Oil Pressure Sender
0-100 PSI, for Hardin Marine Gauges 2019 and later

These heavy duty oil pressure senders are designed to take the high vibration and punishment performance engines dish out, while providing superb accuracy. These senders are 1/8" NPT.

Hardin Marine Water Temperature Sender and Oil Pressure Sender Kit - 2019 and Later Model Gauges
1/8" NPT sender with 1/4", 3/8" and 1/2" NPT bushing kit, Water Temp Sender, and Oil Pressure Senders

This kit includes all the senders you need to complete a new installation of a Hardin Marine 5 Gauge Combo Set.

Hardin Marine Water Temperature Sender and Oil Pressure Sender Kit - 2019 and Later Model Gauges
1/8" NPT sender with 1/4", 3/8" and 1/2" NPT bushing kit, Water Temp Sender, and Oil Pressure Senders

This kit includes all the senders you need to complete a new installation of a Hardin Marine 9 Gauge Combo Set.

Oil Pressure Sender adapter

This unique -10 female to -10 Male fitting with a 1/8"npt female port allows a oil pressure sender or warning sender to be conveniently added to any external -10 oil pressure line line using -10 plumbing.

Used with Hardin Marine Filter Heads 625-7701, 625-7702, 625-7711, 625-7712, 625-7713, 625-7714, 625-7721, 625-7722, 625-7731, 625-7732, 625-7741, 625-7742.

Used with Hardin Marine Filter Heads 625-7701, 625-7702, 625-7711, 625-7712, 625-7713, 625-7714, 625-7721, 625-7722, 625-7731, 625-7732, 625-7741, 625-7742.