Components and Accessories - Gaskets, Seals, O-Rings and Studs

RCD STYLE HEX STARTER STANDS (EA.) (POLISHED)

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

RCD STYLE HEX STARTER STANDS (EA.) (POLISHED)

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

(8 ea.) 5/16″ Stainless Steel studs and nuts for 192 and 250 blowers.

• Weight: 7 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: Low Profile

Stud and Nut Kit for TBS 2″ Blower Spacer. Includes: 8 aluminum blower studs. 8 steel 12 point nuts. 2 extra long studs – for use with a linkage kit bracket.

• Weight: 2 lbs
• Dimensions: 6×6×3 in
• 71 / Low Profile: 71 Series

Stud and Nut Kit for TBS 4″ Blower Spacer. Includes: 8 aluminum blower studs. 8 steel 12 point nuts. 2 extra long studs – for use with a linkage kit bracket.

• Weight: 2 lbs
• Dimensions: 6×6×3 in
• 71 / Low Profile: 71 Series

X-LONG STUDS KIT FOR 2″ BLOWER SPACER FOR LINKAGE BRACKET (5.25″ OAL) QTY 2

• Weight: 1 lbs
• Dimensions: 6×6×3 in
• 71 / Low Profile: 71 Series

• Weight: 2 lbs
• Dimensions: 6×6×3 in
• 71 / Low Profile: 71 Series

• Weight: 2 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

12 point steel flanged blower nuts. Eight each come in an order.

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

2.5" center to center. In the event of a backfire, TBS Pop-Off plate reduces the risk of damage to your blower and manifold, by allowing passage of the excessive pressure from the blower through the manifold's Pop-Off plate. *Only works with TBS street intake manifolds. If another brand manifold is drilled for the Pop-Off plate with a 2.5" center to center, TBS Pop-Off Plate will be applicable. If Customer is willing to modify manifold for 2.5" center to center Pop-Off plate, Kit will be compatible.*

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

For use when Bust Panel is not needed for manifold use.

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: 71 Series

Burst Panel for competition manifolds.

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: 71 Series

These Billet Bearing Retainers are machined to replace your worn down bearing retainers that are attached to the bearing plate.

• Weight: 1 lbs
• Dimensions: 14×8×6 in

Everyone’s needs, like everyone’s cars, are unique to your end goal and how they want to achieve it. TBS helps supply those needs with or line of blower spacers giving you more options than before with blower hight when building your ideal set up. Cast Aluminum polished to a mirror-like finish that will include the hardware and gaskets to bring your setup to the height you need.

• Weight: 16 lbs
• Dimensions: 20×14×4 in
• 71 / Low Profile: 71 Series

Aluminum Blower Studs, 7/16" Diameter, 2.880" OAL Kit

Engineered to minimize damage to either manifold or blower housing during unexpected blower explosions, these break-away blower studs are designed to allow separation of manifold and blower. Use of these special studs could save you thousands of dollars! Manufactured from premium-quality aluminum and heat treated to provide the optimum balance between keeping the supercharger in place and breaking under a predetermined amount of force. Kit comes complete with aerospace quality nuts. Aluminum studs are anodized.