129-27200 1440-8m-75 HTD (56 7" x 2 95") 180 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
129-27230 1600-8m-75 HTD (63" x 2 95") 200 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
129-27255 1760-8m-75 HTD (69 3" x 2 95") 220 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
129-27100 540-H-300 (54" x 3") 108 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
129-27110 570-H-300 (57" x 3") 114 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
129-27120 585-H-300 (58 5" x 3") 117 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
129-27130 600-H-300 (60" x 3") 120 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
129-27140 630-H-300 (63" x 3") 126 Tooth
The belts are listed by their proper
metric identification (length / pitch / width, expressed in millimeters), followed
by the US conversion of length and width, and finally, the tooth count of
the belt The full scale profile schematics shown for each style belt can
further help you in identifying which belt you might be presently using,
plus inform you of the materials used in it's construction Gates
Rubber Company, the manufacturer of these belts, recommends you do
not interchange the HTD and GT belt and pulley profiles
|
|
