Components and Accessories - Drive Belts

10 RIB BELT 1305MM (51.38") FOR 192/250 BLOWER

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts: 1320MM (52.0")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts:1335MM (52.55")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 10 Rib Belts:1360MM (53.54")
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The 8mm rounded tooth belt is capable of transferring 40% more horsepower then the 1/2 pitch style. The 8mm belt system is used for both looks and performance. This belt is 2″ wide and works with TBS 8mm pulleys found on The Blower Shop's 192/250 blowers. 1280 8MM 50 (2″ WIDE) BELT (50.4″)

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The 8mm rounded tooth belt is capable of transferring 40% more horsepower then the 1/2 pitch style. The 8mm belt system is used for both looks and performance. This belt is 2″ wide and works with TBS 8mm pulleys found on The Blower Shop's 192/250 blowers. 1360 8MM 50 (2″ WIDE) BELT 53.5″.

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

The 8mm rounded tooth belt is capable of transferring 40% more horsepower then the 1/2 pitch style. The 8mm belt system is used for both looks and performance. TBS recommends that the 8mm belt system should be used in most cases other than The Blower Shop's 192 and 250 Blower options. Tooth Count 1440- 180 teeth

• Weight: 1 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile
• Belt Style: 8MM

5.50″ TBS BELT GUARD ONLY (NO STANDS) [#8605] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands)
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

6.375″ OAL TBS BELT GUARD (FITS 3.90″ TO 4.90″ SNOUT) [#8606] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 3 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

7.375″ OAL TBS BELT GUARD (FITS 4.90″ TO 5.90″ SNOUT) [#8607] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 3 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

8.375″ OAL TBS BELT GUARD (FITS 5.90″ TO 6.90″ SNOUT) [#8608] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 3 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

9.375″ OAL TBS BELT GUARD (FITS 6.90″ TO 7.90″ SNOUT) [#8609] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

10.375″ OAL TBS BELT GUARD (FITS 7.90″ TO 8.90″ SNOUT) [#8610] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

11.375″ OAL TBS BELT GUARD (FITS 8.90″ TO 9.90″ SNOUT) [#8611] With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract the possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor. Features : – Easily mounts to existing hardware – Works with Roots style blowers – Accommodates pulleys up to 7″ in diameter – NHRA / IHRA Required Belt Guard Chart: #8605: Fits snouts 3.90” and smaller No stands. 5/16 – 18 x 2.5” [x4] #8606: Fits 3.90” – 4.90” snout. 7/8” stands [x4] 5/16 – 18 x 3.5” [x4] #8607: Fits 4.90” – 5.90” snout. 1 7/8” stands [x4] 5/16 – 18 x 4.5” [x4] #8608: Fits 5.90” – 6.90” snout. 2 7/8” stands [x4] 5/16 – 18 x 5.5” [x4] GUARDS BELOW USE BELT GUARD STUDS #8609: Fits 6.90” – 7.90” snout. 3 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8610: Fits 7.90” – 8.90” snout. 4 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4] #8611: Fits 8.90” – 9.90” snout. 5 7/8” stands [x4] Belt guard studs [x4] 5/16 – 18 x 1” [x4]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• Length: 5 1/2 Inch (No Stands), 6 3/8 Inch, 7 3/8 Inch, 8 3/8 Inch, 9 3/8 Inch, 10 3/8 Inch, 11 3/8 Inch, TBS XR (Only) No Stands – BLACK
• 71 / Low Profile: 71 Series
• Finish: Polished, Black Hard Anodized

TBS 192/250 BELT GUARD (FITS SHORT & MEDIUM LENGTH SNOUTS) KIT INCLUDES 4qty (3.750” STANDS) 4qty (2.750” STANDS) AS WELL AS BELT GUARD FRONT AND REAR BRACKETS, CENTER STANDS AND ALL HARDWARE TO INSTALL. PRODUCT NOTE (THIS BELT GUARD WILL WORK WITH 8MM & SERPENTINE DRIVE SYSTEMS) With belt failure being a problem among supercharged motors, TBS has developed its own billet Belt Guard to counteract any possible damage. Assembled with an assortment of stand lengths it can accommodate room for all of The Blower Shop's snout lengths. The Blower Shop's Polished Belt Guards are machined from 6061 billet aluminum and utilize stainless steel hardware. A TBS Belt Guard is designed to protect vital components in the event of a belt failure, this is a must have for street rods and show cars alike. No additional mounting hardware is needed to secure these safety belt guards to your blown motor.

• Weight: 4 lbs
• Dimensions: 7×7×3 in
• 71 / Low Profile: Low Profile

TBS XR SERIES BELT GUARD (STANDS NOT INCLUDED) BLACK ANODIZED [#8601] 8601 XR Belt Guard is designed to bolt to a TBS XR-1 Front Cover or a #8604 clamp on belt guard bracket. This pattern is the same as on an SSI or Kobelco 3 Bolt Cover. This is a Belt Guard only and does NOT have provisions for a starter mount. Includes: Inner and outer Belt guard Frames (4 Each) Center Stands with Hardware (3 Each) 3/8-16 x 3/4″ Flat Heads XR Series Belt Guards Stand Chart: No Spacer: Fits 3.90” snout (or 5.45” overall) when mounted to front cover. Includes: 3/8 – 16 x 3/4″ Flat Head [x3] #8630 – .20” Spacer: Fits 5.15” snout (or 5.65” overall) when mounted to front cover. Includes: .20 Spacer [x3] 3/8 – 16 x 1” Flat Head [x3] #8631 – 1.20” Spacer: Fits 5.90” snout (or 6.65” overall) when mounted to front cover. Includes: 1.20” Spacer [x3] 3/8 – 16 x 2” Flat Head [x3] #8632 – 2” XR Stand: Fits 6.90” snout (or 7.45” overall) when mounted to front cover. Includes: 2” XR Stand [x3] 3/8 – 16 x 1” Flat Head [x3] 3/8 – 16 x 1.5” stud [x3] #8633 – 3” XR Stand: Fits 7.90” snout (or 8.45” overall) when mounted to front cover. Includes: 3” XR Stand [x3] 3/8 – 16 x 1” Flat Head [x3] 3/8 – 16 x 1.5” stud [x3] #8604 – Clamp for XR Belt Guard: Fits 5.90” – 8.40” Snouts. Includes: Belt Guard Clamp [x1] 1/4 – 20 x 1” S.H.C.S. [x2] *Installed in clamp. 3/8 – 16 x 3/4″ Flat Head [x3]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• 71 / Low Profile: 71 Series
• XR / Race: XR