Components and Accessories - Carburetor Adapters

Billet Dual Carburetor Adaptor - Side Saddle

Billet Dual Dominator Adaptor - Side Saddle

The Blower Shop™ Forward Injector Adapter, with 4 injector ports on each side is built out of the same aircraft grade aluminum as The Blower Shop's industry leading roots superchargers. Polished to a mirror like finish, they not only match The Blower Shop's line of show quality polished blowers but they complete the seamless transition between the injector hat and the supercharger. TBS Forward Injector adapter is made from6061 billet aluminum that is O-ringed on both sides so no gaskets or messy silicone has to be used. Specifically engineered to ram the air/fuel into your blower system resulting in more horsepower and higher air/fuel volume. It goes up 2″ and forward 3″. **Black anodizing available upon request. Special order, please call for details.**

• Weight: 6 lbs
• Dimensions: 6×6×24 in
• Finish: Polished, Black Hard Anodized
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI

The Blower Shop™ Reverse Injector Adapter, also known as a Reverse Injector Spacer is built out of the same aircraft grade aluminum as The Blower Shop's industry leading roots superchargers. Polished to a mirror like finish, they not only match The Blower Shop's line of show quality polished blowers but they complete the seamless transition between the injector hat and the supercharger.TBS Reverse Injector adapter is made from 1.00″ billet aluminum that is O-ringed on both sides so no gaskets or messy silicone has to be used. **Black anodizing available upon request. Special order, please call for details.**

• Weight: 6 lbs
• Dimensions: 7×1.5×17 in
• Finish: Polished, Black Hard Anodized
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI

The Blower Shop™ Reverse Injector Adapter, with 4 injector ports on each side is built out of the same aircraft grade aluminum as The Blower Shop's industry-leading roots superchargers. Polished to a mirror-like finish, they not only match The Blower Shop's line of show quality polished blowers but they complete the seamless transition between the injector hat and the supercharger. TBS Reverse Injector adapter is made from 6061 billet aluminum that is O-ringed on both sides so no gaskets or messy silicone has to be used. It goes up 2″ and forward 3″. **Black anodizing available upon request. Special order, please call for details.**

• Weight: 6 lbs
• Dimensions: 6×6×24 in
• Finish: Polished, Black Hard Anodized
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI

The Blower Shop™ Forward Carburetor Spacer is built out of the same aircraft grade aluminum as The Blower Shop's industry-leading roots superchargers. Polished to a mirror-like finish, they not only match The Blower Shop's line of show quality polished blowers but they complete the seamless transition between the carburetors and the supercharger. TBS Forward Carburetor Spacers are made from 6061 billet aluminum that is O-ringed on both sides so no gaskets or messy silicone has to be used. Specifically engineered to ram the air/fuel into your blower system resulting in more horsepower and higher air/fuel volume. Designed to push the carbs forward and change how the air and fuel mix. Get the most efficiency possible on your Supercharger. It goes 2″ up and 2″ forward. **Black anodizing available upon request. Special order, please call for details.**

• Weight: 6 lbs
• Dimensions: 6×6×24 in
• Finish: Standard Polished, Also Available Black Hard Anodized by Special Order
• 71 / Low Profile: 71 Series
• Fuel Delivery: Carb

TBS Carburetor Adapters are CNC machined with the highest level of precision. Polished to a mirror like finish, they not only match The Blower Shop's line of show quality polished blowers, but they complete the seamless transition between the carburetor and the supercharger. **Black anodizing available upon request. Special order, please call for details.**

• Weight: 2 lbs
• Dimensions: 7×1.5×15 in
• 71 / Low Profile: Low Profile
• Fuel Delivery: Carb

• Weight: 4 lbs
• Dimensions: 16×12×3 in
• 71 / Low Profile: Low Profile
• Fuel Delivery: EFI

Aeroflow Throttle Stop Designed to limit the throttle during a burnout, these Throttle Stops are machined from billet aluminum and hard anodized, easily removable within seconds thanks to the quick release pin.

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• Color: Polished, Black
• 71 / Low Profile: 71 Series

THROTTLE STOP (BLACK) – AEROFLOW

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

Click here for examples of Bosch style injectors that will work with all TBS EFI products.

• Weight: 15 lbs
• Dimensions: 16×12×3 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI

Click here for examples of Bosch style injectors that will work with all TBS EFI products.

• Weight: 15 lbs
• Dimensions: 16×12×3 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI

EFI FUEL RAILS ONLY

• Weight: 5 lbs
• Dimensions: 16×12×3 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: EFI

Feature an adjustable heim end design and needle bearings for long life and smooth throttle operation. To prevent slippage the shaft and arms are serrated and there is also a set of two extra long steel studs to mount the lower cable bracket to the left side of the blower. Click Here For Instructions

• Weight: 4 lbs
• Dimensions: 14×4×2 in
• Linkage Kits: 250 Dual Sideways Kit, Dual Inline (8 5/8") Kit, Dual Sideways (4150 / 4500)
• 71 / Low Profile: 71 Series
• Fuel Delivery: Carb

Feature an adjustable heim end design and needle bearings for long life and smooth throttle operation. To prevent slippage the shaft and arms are serrated and there is also a set of two extra long steel studs to mount the lower cable bracket to the left side of the blower. Click Here For Instructions

• Weight: 3 lbs
• Dimensions: 14×4×2 in
• Linkage Kits: 250 Dual Sideways Kit, Dual Inline (8 5/8") Kit, Dual Sideways (4150 / 4500)
• 71 / Low Profile: 71 Series
• Fuel Delivery: Carb

For Kuhl, Hampton dual carb adapters where the carbs go up and forward, rear carb goes up and back. Centerline to centerline 12″ – 12 1/4″ Not the rod out of the 4350 linkage kit.

• Weight: 1 lbs
• Dimensions: 15×7×2 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: Carb

X-LONG LINKAGE ROD FOR 2.0" TALL FORWARD CARB SPACER

• Weight: 2 lbs
• Dimensions: 15×7×2 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: Carb

The Morse Throttle Cable Bracket connects 3300 series inboard cables directly to the linkage bracket mounted on the side of your blower. Each bracket has six 3/16″ diameter holes on 1/2″ centers, 3/8″ apart. Click Here For Linkage Kit Instructions

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

This Bridal is for a Dual Inlet Fuel Line and is manufactured from stainless steel polished tubing with AN fittings. Provides a single fuel connection for 4150 style carb plumbing at the front or rear of the blower carb.

• Weight: 1 lbs
• Dimensions: 15×7×2 in
• Finish: Polished S.S tubing., Anodized Black fittings
• 71 / Low Profile: 71 Series
• Fuel Delivery: Carb

BRIDAL FOR DUAL INLET FUEL LINE KIT ANODIZED BLACK FITTINGS (FITS P/N 4372-AB)

• Weight: 3 lbs
• Dimensions: 15×7×2 in
• 71 / Low Profile: 71 Series
• Fuel Delivery: Carb

DUAL INLET 4150 FUEL LINE KIT ANODIZED BLACK FITTINGS (HOLLEY)

• Weight: 3 lbs
• Dimensions: 16×9×3 in

These dual inlet 4500 fuel line kit is made from 1/2″ stainless steel polished fuel line tubing. With AN8 fittings these provide a single fuel connection per carburetor to supply fuel to both carburetor bowls.

• Weight: 3 lbs
• Dimensions: 14×8×6 in