Components and Accessories - Gaskets, Seals, O-Rings and Studs

Eight pack of O-rings for LS intake ports.

• Weight: 0.1 lbs
• Dimensions: 4×4×.3 in
• Engine Model: LS 1/LS 3

O-Ring designed for TBS snout.

• Weight: 0.1 lbs
• Dimensions: 4×4×.1 in

O-ring material designed to work with all of The Blower Shop's fitted applications, this is a 1/8″ o-ring and is sold per foot.

• Weight: 0.1 lbs
• Dimensions: 4×4×.125 in

1.175 RUBBER SEAL This rotor shaft seal is the standard diameter of 1.175 and has a single rubber lip. 1.312 RUBBER SEAL This seal has a larger diameter I.D. for use with rotor shaft wear rings. The seal I.D. is 1.312″

• Weight: 0.1 lbs
• Dimensions: 2×2×.5 in
• Seal Diameter: 1.175 Rubber Seal, 1.312 Rubber Seal
• 71 / Low Profile: 71 Series

1.175 RUBBER SEAL This rotor shaft seal is the standard diameter of 1.175 and has a single rubber lip. 1.312 RUBBER SEAL This seal has a larger diameter I.D. for use with rotor shaft wear rings. The seal I.D. is 1.312″

• Weight: 0.1 lbs
• Dimensions: 2×2×.5 in
• Seal Diameter: 1.175 Rubber Seal, 1.312 Rubber Seal
• 71 / Low Profile: 71 Series

1.175 DOUBLE LIP TEF. SEAL This is a standard diameter 1.175″ double lip teflon rotor shaft seal. These are used in race blowers. 1.312 DOUBLE LIP TEF. SEAL

• Weight: 0.1 lbs
• Dimensions: 2×2×.5 in
• Seal Diameter: 1.175 Double Lip Teflon Seal, 1.312 Double Lip Teflon Seal
• 71 / Low Profile: 71 Series

1.312 DOUBLE LIP TEF. SEAL

• Weight: 0.1 lbs
• Dimensions: 2×2×.5 in
• Seal Diameter: 1.175 Double Lip Teflon Seal, 1.312 Double Lip Teflon Seal
• 71 / Low Profile: 71 Series

Double Lip Teflon Snout Seal (1.50″ x 2.50″ x .50″) made from premium materials.

• Weight: 0.1 lbs
• Dimensions: 2.5×2.5×.5 in
• 71 / Low Profile: 71 Series

XR SERIES 1.50″ DOUBLE LIP TEF. SEAL. This is specifically for a TBS XR1 blower.

• Weight: 0.2 lbs
• Dimensions: 2×2×.5 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

• Weight: 0.1 lbs
• Dimensions: 1.5×1.5×.5 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

The race rear bearing & seal kit includes (2) double row shielded bearings and (2) standard diameter rotor shaft seals.

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

Seal Wear Ring When your standard diameter rotor shaft seal surface has been grooved from years of use, these seal wear rings help make it new again. Use of these seal wear rings require a larger diameter rotor shaft seal 1.312. Use TBS part #1091

• Weight: 0.2 lbs
• Dimensions: 3×1.5×.5 in
• 71 / Low Profile: 71 Series

TBS 192/250 DOUBLE ROW BEARING AND SEAL KIT

• Weight: 2 lbs
• Dimensions: 12×8×2 in
• 71 / Low Profile: Low Profile

Small Block Chevy intake gaskets .060″ think. This product comes as a pair.

• Weight: 0.1 lbs
• Dimensions: 19×3×.1 in
• Small Block Number: Small Block 1205, Small Block 1206

Small Block Chevy intake gaskets .060″ think. This product comes as a pair.

• Weight: 0.1 lbs
• Dimensions: 19×3×.125 in
• Small Block Number: Small Block 1205, Small Block 1206

Big Block Chevy intake gaskets in a .060″ thickness. This product comes as a pair.

• Weight: 0.1 lbs
• Dimensions: 19×3×.1 in
• Gasket Thickness: .060, .125

• Weight: 1 lbs
• Dimensions: 4×4×4 in

Rear cover Gasket for the B&M Mega 420. The blower shop has most supercharger gaskets that are needed for almost every manufacturer.

• Dimensions: 13×8×.05 in

5/16-18 X 3 1/2" STEEL STUD (EA.) [STD FRONT PLATE]

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series