All Exhaust Systems by Engine Model - Big Block Chevy 454 / 502, 7.4L / 8.2L Exhaust Systems

Cyclone Sound-Select™ Header System For GM Big Block Bravo - Fully Polished

This is one of the easiest horsepower enhancing exhaustsystems available today! For boats currently using a switch-able exhaust diverter system, this was designed to replace MerCruiser® big block silent choice systems. This system will save up to 80 lbs compared to cast iron ones. Oil filter bracket, shift control bracket, and ECU brackets sold separately. Gaskets, and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology. These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:

• Standard Mercury Exhaust Hole Locations

Cyclone Low Exit System Header System For GM Big Block Bravo - Fully Polished

This Hardin Marine Cyclone system is designed around an application where an incorporated swim platform creates the need to exit the exhaust in a lower than standard location Through the use of a floating elbow positioning of the exit is somewhat maneuverable, these systems are perfect for limited access applications. Oil filter bracket, shift control bracket, and ECU bracket not included. Gaskets and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology. These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:

• Standard Mercury Exhaust Hole Locations

Cyclone Water Jacketed Header System For GM Big Block Standard Dimension TRS - Fully Polished

This Cyclone wet exhaust series header works perfectly on both stock and modified performance applications This header mixes engine cooling water with the exhaust near the end of the tailpipe That allows you to use a 4" rubber hose connection to attach your transom mounted exhaust tips This is the perfect replacement for your factory exhaust system. Oil filter bracket, shift control bracket, and ECU bracket not included. Gaskets and bolts are included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:

• Standard Mercury Exhaust Hole Locations
• How To Measure For Custom Tailpipes

Cyclone H/P Air Sound-Select Header System For GM Big Block Bravo - Fully Polished

At last, a true high performance header with an air activated diverter built-in This gorgeous, one-piece-design tailpipe is the perfect choice for the power hungry boater who is seeking to reduce noise This system is sold complete with all necessary hose fittings, pump, gaskets, and bolts. Oil filter bracket, shift control bracket, and ECU bracket not included.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology.  These "Cyclone" header systems share 100% 316L stainless steel construction.  All appropriate flanges are laser cut and CNC machined for a perfect gasket seal Each individual exhaust tube is bent to precise, exact tolerances every time.  A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube.  While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion.  But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains.  These systems are available in many configurations to fit every boaters needs.  Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:

• Standard Mercury Exhaust Hole Locations

Cyclone "BIG GUN" System For GM Big Block - Fully Polished

At last the Biggest and the Best System available for the ultimate in performance These systems use an actual 4" internal pipe with a massive 4-1/2" outer shell These systems produce almost non-existent restriction to exhaust flow through the double wall water jacketed transom tail section These systems are referenced as dry tailpipe due to the fact exhaust flow never makes contact with the discharged water Each of these systems are designed for large cubic inch high horsepower and supercharged applications Additional transom sealing rings will need to be purchased separately When only the best will do Cyclone delivers Note: all Big Gun riser/tailpipes are custom built, a simple measurement guide is all that's needed to complete Allow 7-14 working days to build.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology. These "Cyclone" header systems share 100% 316L stainless steel construction. All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and mid range torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts and gaskets making installation a snap.

Additional Information:

• Standard Mercury Exhaust Hole Locations
• How To Measure For Custom Tailpipes

Note:  Pricing indicated includes STANDARD DIMENSION Tailpipes only.  Custom Tailpipes may incur additional charges depending on the length and complexity of the tailpipe required.

Cyclone Dry System For GM Big Block Custom Dimension Dry System - Fully Polished

For those of you seeking the ultimate performance from your large cubic inch, aggressively cammed, naturally aspirated or supercharged engines This double-walled tailpipe discharges all of its cooling water through a 3/4" NPT bung in the side of the tailpipe It keeps the exhaust gas from coming in contact with any discharged water These tailpipes extend through the transom and require the additional purchase of transom sealing rings.

If you are one of thousands of performance boaters seeking the power and styling from stainless steel tubular headers then you're looking at the leader in exhaust technology These "Cyclone" header systems share 100% 316L stainless steel construction All appropriate flanges are laser cut and CNC machined for a perfect gasket seal. Each individual exhaust tube is bent to precise, exact tolerances every time. A computer designed fully welded water inlet manifold provides equal water distribution to each exhaust runner tube. While each set of headers goes through a 1900 degree annealing process that multiplies the durability factor of the header many times over while providing added protection against corrosion. But the heart of these systems lies in the ability to generate loads of additional power. By using CAD-5 Technology to develop a unique staggered tube runner length, these systems are capable of maximizing the broadest low end and midrange torque, all the while yielding incredible peak power gains. These systems are available in many configurations to fit every boaters needs. Rest assured when you lay down your hard earned money because the system comes complete with all necessary mounting bolts, gaskets, and shift and oil filter brackets making installation a snap.

Additional Information:

• Standard Mercury Exhaust Hole Locations
• How To Measure For Custom Tailpipes

Note:  Pricing indicated includes STANDARD DIMENSION Tailpipes only.  Custom Tailpipes may incur additional charges depending on the length and complexity of the tailpipe required.

Cyclone 4.50" "BIG GUN" Below Platform System For GM Big Block - Fully Polished

Description: For those high horsepower supercharged engine applications that require an exhaust exit that's basically 12" lower than a standard Bravo application. These systems feature a 4.-1/2" external pipe with a 4" internal pipe. These systems produce almost non-existent restriction to exhaust flow through the double wall water jacketed transom tail section. These systems are referenced as dry tailpipe due to the fact exhaust flow never makes contact with the discharged water. These systems are VERY LOUD due to unrestricted exhaust flow. Additional transom sealing rings will need to be purchased separately When only the best will do Cyclone delivers Note: all Big Gun riser/tailpipes are custom built, this price is based on the system referenced above. Changes or modifications could cost more. Fill out this simple measurement guide to get started. Allow 7-14 working days to build.

CMI Fusion Integrated Tailpipe Big Block Chevy Exhaust System

This is the all new, salt water rated "Fusion" Performance Header system from CMI. For years Custom Marine has produced custom exhaust systems for just about every Hi-Performance application.  But now CMI has set their sights on offering an affordable Performance Header system for the entry level Hi-Performance market with the new "Fusion" header system. This new header was designed as an affordable upgrade to exhaust manifold systems for engines needing to support upwards of 600 horsepower, while using standard Mercury Bravo exhaust exit locations. These headers are offered in the "Platinum" series finish which features a brushed satin lower section,  then mating it to a highly polished top tailpipe to produce a striking appearance on any engine. By integrating the tailpipe CMI can reduce costs to the user and eliminate costly clamps and gaskets. Premium 316L stainless steel construction, as well as the patented cool collar exhaust flange make for a durable header that will offer years of trouble free service. While the standard version is designed to fit stock Mercruiser Bravo exhaust exit locations, there are also two custom fit tailpipe options available that will allow the header to be assembled at the factory to your boats specifications. Up to a 2" vertical and/or horizontal correction can be made from the stock locations which allows this header to fit a huge range of options. (Additional charges apply)

Note: This system does not have separate tailpipes. It's pipes are set up for standard Bravo hole locations.

CMI 454/502 Direct Mercruiser Replacement E-Top Exhaust System, Polished

The CMI 454/502 E-Top Header Kit is a a true plug and play system. There is no need to purchase additional custom pipes. These are a direct replacement for your stock 454/502 engine. CMI headers offer more water jacketed protection than your stock exhaust can provide. CMI uses the same high quality semi-automated process on these headers as with the entire product line. These headers are fully post annealed to reduce stresses built up in the header during the manufacturing process. Best of all, 454/502 E-Top headers are made to last, they are mandrel bent and formed from hight quality 316L grade material. There are no parts to crack, all CMI collectors are forged from American made Stainless Steel.

Note: All CMI Systems are sold without Talipipes

CMI 454/502 Direct Mercruiser Replacement E-Top Exhaust System, Satin

The CMI 454/502 E-Top Header Kit is a a true plug and play system. There is no need to purchase additional custom pipes. These are a direct replacement for your stock 454/502 engine. CMI headers offer more water jacketed protection than your stock exhaust can provide. CMI uses the same high quality semi-automated process on these headers as with the entire product line. These headers are fully post annealed to reduce stresses built up in the header during the manufacturing process. Best of all, 454/502 E-Top headers are made to last, they are mandrel bent and formed from hight quality 316L grade material. There are no parts to crack, all CMI collectors are forged from American made Stainless Steel.

Note: All CMI Systems are sold without Talipipes

CMI Merc 500 EFI Replacement E-Top Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. All CMI Elbow Top Systems include water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

Note: All CMI Systems are sold without Tailpipes 

CMI Big Block Chevy E-Top Platinum Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for stan¬dard transom layouts and placement of thru-hull exhaust tips. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

Note: All CMI Systems are sold without Tailpipes

CMI Big Block Chevy E-Top Polished Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for stan¬dard transom layouts and placement of thru-hull exhaust tips. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

Note: All CMI Systems are sold without Tailpipes

The picture for this item is shown with a Stainless distribution tree, but this part includes a rubber distribution tree.

CMI Big Block Chevy E-Top Platinum Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for stan¬dard transom layouts and placement of thru-hull exhaust tips. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

This Kit includes an upgrade to a Stainless Steel Water Distribution Tree.

Note: All CMI Systems are sold without Tailpipes

CMI Big Block Chevy E-Top Polished Exhaust System

CMI Elbow Top headers are designed for direct replacement of most stock cast manifolds. Top engine builders and stern drive manufacturers who want to optimize performance of small- or big-block marinized engines prefer CMI Elbow Top headers for their engines. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for stan¬dard transom layouts and placement of thru-hull exhaust tips. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.

This Kit includes an upgrade to a Stainless Steel Water Distribution Tree.

Note: All CMI Systems are sold without Tailpipes

CMI 520 E-Top Satin Exhaust Header System

The satin finished 520 E-top kits offers all the same features as our standard CMI E-Top header. When installed on a Mercury 520 you can expect increases of up to thirty-one horsepower. This are direct replacement headers and will work with the existing exhaust outlets that were installed with your OEM exhaust manifolds. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations. Any Elbow Top System may be purchased with a stainless steel distribution tube upgrade.

• Increases in Horsepower up to 31 HP
• Direct replacement – works with existing exhaust outlets
• Improved mid-range acceleration and torque
• Polished and satin finish available
• Patented “Cool Collar” design
• Mandrel bent and formed from high quality 316L grade stainless steel

CMI 520 E-Top Polished Exhaust Header System

The polished 520 E-top kits offers all the same features as our standard CMI E-Top header. When installed on a Mercury 520 you can expect increases of up to thirty-one horsepower. This are direct replacement headers and will work with the existing exhaust outlets that were installed with your OEM exhaust manifolds. All CMI Elbow Top Systems include rubber water distribution tubes, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations. Any Elbow Top System may be purchased with a stainless steel distribution tube upgrade.

• Increases in Horsepower up to 31 HP
• Direct replacement – works with existing exhaust outlets
• Improved mid-range acceleration and torque
• Polished and satin finish available
• Patented “Cool Collar” design
• Mandrel bent and formed from high quality 316L grade stainless steel

CMI Big Block Chevy Standard Bravo Sport Tube Exhaust System, Polished

CMI Sport Tubes are a superior long tube header designed for both racing or virtually any high-performance application. For big- and small-block applications where maximum scavenging and horsepower are required, CMI Sport Tube headers deliver peak performance and power from naturally aspirated engines that generate more than one horsepower per cubic inch of displacement.

The all polished Sport Tube system is offered with a range of exhaust tailpipe options, as well as CMI's Sound Choice™ selectable silencing system. Each system includes all header attaching bolts, gaskets and cooling fittings required for installation.

Note: All CMI Systems are sold without Tailpipes

CMI Big Block Chevy Sport Tube Exhaust System, 6" Taller, Polished

CMI Sport Tubes are a superior long tube header designed for both racing or virtually any high-performance application. For big- and small-block applications where maximum scavenging and horsepower are required, CMI Sport Tube headers deliver peak performance and power from naturally aspirated engines that generate more than one horsepower per cubic inch of displacement.

The all polished Sport Tube system is offered with a range of exhaust tailpipe options, as well as CMI's Sound Choice™ selectable silencing system. Each system includes all header attaching bolts, gaskets and cooling fittings required for installation.

Note: All CMI Systems are sold without Tailpipes

CMI Big Block Chevy Sport Tube Exhaust System, 9" Taller, Polished

CMI Sport Tubes are a superior long tube header designed for both racing or virtually any high-performance application. For big- and small-block applications where maximum scavenging and horsepower are required, CMI Sport Tube headers deliver peak performance and power from naturally aspirated engines that generate more than one horsepower per cubic inch of displacement.

The all polished Sport Tube system is offered with a range of exhaust tailpipe options, as well as CMI's Sound Choice™ selectable silencing system. Each system includes all header attaching bolts, gaskets and cooling fittings required for installation.

Note: All CMI Systems are sold without Tailpipes