The Blower Shop

TBS Idler Pulley Assembly TBS Idler Pulleys are machined from 6061 billet aluminum and heat treated for outstanding durability and performance. The 2 inch and 3-inch idler pulley utilize two, single row lubricated sealed ball bearings that are pressed into the idler housing. Polished to the same reflective characteristics as The Blower Shop's Superchargers, all parts will reflect the top of craftsmanship. Each Idler Pulley features “dual offset reversibility” which allows the end user to turn the pulley around to adjust spacing by 1 inch. This means that if the blower snout length is changed, belt spacing will be a simple process. Available in three stand lengths for fitment with varying alignment. Machined raised edges to ensure straight tracking of the blower belt while in a rotation. Each Idler pulley uses two bearings and Grade 8 hardware. **Comes polished by default. Satin finish (cast only) and black hard anodizing is available at an extra charge, but are not available through online orders. Please call us to place special orders.

• Weight: 2 lbs
• Dimensions: 4×4×4 in
• Stand Length: 1 3/4", 1.55", 2 3/4"
• 71 / Low Profile: 71 Series

• Weight: 3 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

TBS Replacement Intercooler Core w/Gaskets (Aluminum). Comes with four gaskets and two o-rings.

TBS XR SERIES BELT GUARD (STANDS NOT INCLUDED) BLACK ANODIZED [#8601] 8601 XR Belt Guard is designed to bolt to a TBS XR-1 Front Cover or a #8604 clamp on belt guard bracket. This pattern is the same as on an SSI or Kobelco 3 Bolt Cover. This is a Belt Guard only and does NOT have provisions for a starter mount. Includes: Inner and outer Belt guard Frames (4 Each) Center Stands with Hardware (3 Each) 3/8-16 x 3/4″ Flat Heads XR Series Belt Guards Stand Chart: No Spacer: Fits 3.90” snout (or 5.45” overall) when mounted to front cover. Includes: 3/8 – 16 x 3/4″ Flat Head [x3] #8630 – .20” Spacer: Fits 5.15” snout (or 5.65” overall) when mounted to front cover. Includes: .20 Spacer [x3] 3/8 – 16 x 1” Flat Head [x3] #8631 – 1.20” Spacer: Fits 5.90” snout (or 6.65” overall) when mounted to front cover. Includes: 1.20” Spacer [x3] 3/8 – 16 x 2” Flat Head [x3] #8632 – 2” XR Stand: Fits 6.90” snout (or 7.45” overall) when mounted to front cover. Includes: 2” XR Stand [x3] 3/8 – 16 x 1” Flat Head [x3] 3/8 – 16 x 1.5” stud [x3] #8633 – 3” XR Stand: Fits 7.90” snout (or 8.45” overall) when mounted to front cover. Includes: 3” XR Stand [x3] 3/8 – 16 x 1” Flat Head [x3] 3/8 – 16 x 1.5” stud [x3] #8604 – Clamp for XR Belt Guard: Fits 5.90” – 8.40” Snouts. Includes: Belt Guard Clamp [x1] 1/4 – 20 x 1” S.H.C.S. [x2] *Installed in clamp. 3/8 – 16 x 3/4″ Flat Head [x3]

• Weight: 4 lbs
• Dimensions: 9×8×4 in
• 71 / Low Profile: 71 Series
• XR / Race: XR

Tee Nut

Inlet gasket with Screen.

• Weight: 2 lbs
• Dimensions: 14×6×1 in
• Single or 10 Pack: Single Inlet Gasket, 10 Pack Inlet Gasket
• 71 / Low Profile: Low Profile

THROTTLE STOP (BLACK) – AEROFLOW

• Weight: 1 lbs
• Dimensions: 4×4×4 in
• 71 / Low Profile: 71 Series

TOP PULLEY 10 RIB Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 10 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

TOP PULLEY 10 RIB Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 10 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

TOP PULLEY 10 RIB Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 10 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

TOP PULLEY 10 RIB Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 10 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

TOP PULLEY 10 RIB Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 10 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

TOP PULLEY 10 RIB Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 10 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

TOP PULLEY 10 RIB Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 10 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 10 RIB Drive

16 RIB TOP PULLEYS Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 16 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 16 RIB Drive

16 RIB TOP PULLEYS Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 1 lbs
• Dimensions: 6×6×4 in
• Top Pulley 16 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 16 RIB Drive

16 RIB TOP PULLEYS Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 2 lbs
• Dimensions: 6×6×4 in
• Top Pulley 16 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 16 RIB Drive

16 RIB TOP PULLEYS Here at The Blower Shop™ we use high quality 6061 billet aluminum to manufacture The Blower Shop's pulleys. These pulleys are machined to a precise specification, to ensure proper fit and performance. We offer an array of sizes to increase or decrease the desired boost. These pulleys are for 192/250 Blowers. 2.85″-4.35″

• Weight: 2 lbs
• Dimensions: 6×6×4 in
• Top Pulley 16 Rib: 2.85", 3.10", 3.35", 3.60", 3.85", 4.10", 4.35"
• 71 / Low Profile: Low Profile
• Belt Style: 16 RIB Drive

This is a replacement Shaft and Coupler for a Weiand or B&M Supercharger. It was the standard shaft for the SBC 142/144 long nose Supercharger package as well as the 177 BBC long nose and Merc 525 (keyed pulley) Supercharger package. This shaft has an OAL of 9.900″ and is designed for an 8 15/16″ – 9 1/16″ shout housing. WEIAND/B&M SNOUT SHAFT DIMENSIONS Kit Includes: – 9.900″ Input Shaft – Gear Coupler and Bolts – 6304 Bearing – Seal (1 ea. Weiand, 1 ea. B&M) – C-Clip – 3/8″-24 Pulley Bolt and Washer with 3/16″ Key

• Weight: 3 lbs
• Dimensions: 12×3×3 in

This is a replacement Shaft and Coupler for a B&M Supercharger. It was the standard shaft for the BBC 174 long water pump Supercharger package. It may work in some Weiand Superchargers as well (please check OAL). This shaft has an OAL of 10.730″ and is designed for a 9 3/4″ long snout housing. WEIAND/B&M SNOUT SHAFT DIMENSIONS Kit Includes: – 10.730″ Input Shaft – Gear Coupler and Bolts – 6304 Bearing – Seal (1 ea. Weiand, 1 ea. B&M) – C-Clip – 3/8″-24 Pulley Bolt and Washer with 3/16″ Key

• Weight: 3 lbs
• Dimensions: 12×3×3 in