755-3533 Replacement Coil Bracket - Polished
|
|
420-913215 Replacement Cotter Pin for Hardin Generation 2 Offshore Sea Strainer - 1/2" Shaft
Designed to fit Hardin Offshore Generation 2 (420-913222) Sea Strainers only.
|
|
620-32515 This kit contains the fittings and bolts to install a pair of manifolds on a big block Chevy Cyclone exhaust system.
|
|
620-32520 This kit contains the fittings, gaskets and bolts to install a single riser on a big block Chevy Cyclone exhaust system.
|
|
125-460500 Replacement Exhaust Manifold Adapter Bolt Covers - Pack of 16
This package of replacement covers will help you replace lost of missing ones. These covers are made from 6061-T6 billet
aluminum. Sold in packs of 16.
|
|
137-9038 Power Steering Filter Element for 137-9037
- Replacment filter element only.
|
|
137-9022 Replacement Filter Only
for Intercooler Fine Mesh Sand & Sea Strainer This unit uses a rugged and durable all stainless steel micron filter element to keep sand and small particles out while still allowing for maximum water flow.
|
|
625-7763 Replacement inlet fitting for Hardin thermostatic oil adapters, 625-7703, 625-7704.
|
|
420-4000
- Replacement Fittings and Hose for Hardin/Gil Manifolds
- Kit does not come assembled.
- All Hardware 316L Stainless Steel
|
|
755-5922 Replacement Fuel Pump Fitting -8 JIC to 5/8"-18
|
|
620-45754 Replacement gasket for breather models 620-45756 and 620-45757.
|
|
137-9549
Used to mount Mayfair wing plates. SOLD EACH!
|
|
130-1015 This is a replacement clip for the attaching the hose to the cap on Hardin Marine Sport-Tech Drive Showers.
|
|
410-1506 This hose is a replacement hose for the one included in the 620-300100 Crossover Kit. 9" overall length on the long run, 4" overall length on the short run
|
|
500-1010 Replacement Impeller for 3/4" Magnaflow Water Pump
This is a 12 vane impeller for use with the 3/4" Magnaflow water pump. 500-1007 O-Rings Sold Separately. Measures 1-5/8" wide.
|
|
625-4011
- Replaces Impellers on Hardin Ram Force, Multi-Stage, Lifetime Series Pumps.
- D Shaped Shaft AKA "Single Flat"
- 8 Vane Impeller
- Replacement Impeller For Mercury OEM Sea Pumps
- Replaces OEM Mercruiser # 47-59362T1
|
|
620-913225 Replacement Knob Only for Hardin Offshore Sea Strainers
Designed to fit Hardin Offshore Generation 1 & 2 (420-913222) Sea Strainers only.
|
|
420-913212 Replacement Knob O-Ring or Hardin Offshore Sea Strainers
Designed to fit Hardin Offshore Generation 1 & 2 (420-913222) Sea Strainers only.
|
|
855-L4 Replacement Kill Switch Lanyard
Replacement ignition kill switch lanyard fits 525-368100, 525-368101 and
525-301104. Also Replaces Mercury #8M0092847
|
|
420-913213 Replacement Long Spacer for Hardin Generation 2 Offshore Sea Strainer
Designed to fit Hardin Offshore Generation 2 (420-913222) Sea Strainers only.
|
|
130-1038 Replacement low profile drive shower hose for all Hardin Sport Tech drive showers.
Does not fit Bravo 3 applications.
|
|
130-1039 Replacement low profile drive shower hose for all Hardin Sport Tech drive showers.
Bravo 2 and 3 applications only.
|
|
620-4620 Replacement M66 Rotary Steering Cable (Steering Wheel & Helm Not Included)
Features and Technical Specifications:
- Click here for how to measure for replacement cable
- Cable Entry can be set from either Port or Starboard sides
- Fast connect, simple installation
- All stainless steel cable output ends
- Corrosion resistant materials
- Particularly suitable where clearance is limited
- Minimum steering cable bend radius: 7.9” (200 mm)
- Minimal feedback
- Compact for mounting
- Exceeds EN 28848 safety standards
- Exceeds ABYC P17 safety standards
- Replaces Morse Command 290 Cables (300962, 304411 or 312020)
- Replaces Teleflex SS62 Cables
- Replaces Teleflex SS72 Cables (K66 Installation kit needed)
|
|
620-3620 Replacement M86 Rack and Pinion Steering Cable (Helm Not Included)
Featuresand Technical Specifications:
- Click here for how to measure for replacement cable
- All stainless steel cable output ends
- Made exclusively in corrosion resistant materials
- Minimum steering cable bend radius: 7,9” (200 mm)
- Exceeds EN 28848 safety standards
- Exceeds ABYC P17 safety standards
- Replaces Morse Command 200 Cables (E300619 & E300620)
- Replaces Telflex SS124 Cables only
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Replacement Mercury 525 / 600 / 700 Sea Pump Pulley
All Hardin Marine sea pump pulleys use a mandrel on the pump, then the pulley bolts to the mandrel. Some manufacturers sell you a press-on pulley, these usually work themselves off. Replaces OEM Mercury #899743T
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Replacement Mercury 525 / 600 / 700 Sea Pump Pulley - Grip Coated
All Hardin Marine sea pump pulleys use a mandrel on the pump, then the pulley bolts to the mandrel. Some manufacturers sell you a press-on pulley, these usually work themselves off. This version has a special grip coating on the belt surface to improved contact with the belt. This coating is metallurgically bonded textured metal coating that increases friction, reduces wear, and improves performance. Replaces OEM Mercury #899743T
|
|
625-4140 Replacement Mercury Sea Pump for Mercury 1075 SCi
Built to the highest standards in order to ensure maximum performance this pump is designed to last a lifetime. This pump replaces Design I and II model pumps for Mercury 1075 SCi. Will replace OEM #'s 840048A05 and 841359A01. Pulley is Not Included. Will not replace Design III model pumps. The 3 stage inlet has a stainless down turn inlet.
|
|
