625-1249S Replacement O-Ring for Flex Flare Tailpipe Flange 650-44204J
|
|
650-41160 Rope Seal Clamp Assembly Kit
Parts Included:
- (1) Jumper Hose 1" x 6"
- (2) Stainless Steel Hose Clamp #14
- (1) V-Band Clamp for Standard Rope Seal
- (1) 1/4-20 x 3.5" Hex Screw and Nut
- (1) Rope Seal, High Temp
- (1) Bridge Spacer, for 4" ID Tailpipe
|
|
650-28235P Shift Bracket for CMI Gen-X and Hardin Hurricane, Seaward 525 / 700 Exhaust
This is a bracket only for installing yourself on compatible headers.
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> LT / Small Block Chevy E-Top Headers - Polished
CMI Small Block Elbow Top headers are designed for small block LT engine builders and stern drive manufacturers who want to optimize performance of small marinized engines prefer CMI Elbow Top headers for their 450 HP and above engines. They feature large 1 7/8” primaries. CMI E-Top systems offer separated exhaust passages with long individual exhaust tube runners to minimize cylinder to cylinder influence and improve exhaust gas scavenging, which allows the engine to breathe freely and deliver peak performance power. Each header features a permanently attached, non-adjustable exhaust tailpipe configured to meet precise specifications for standard transom layouts and placement of thru-hull exhaust tips. This header kit comes complete with our upgraded stainless steel water distribution tube, cooling water bypass couplings installed on the collector elbow, by-pass hose fittings, attaching cap screws, exhaust port gaskets, hose clamps and cooling water inlet fittings needed for most installations.
ALL CMI HEADERS ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 3-4 WEEKS
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> LT / Small Block Chevy E-Top Headers - Polished
Works as stock Mercury replacement or for most Stern Drives and Jet
boats. 4" Hose connection. Made from 316L Stainless Steel. Bolts
directly in the existing location of your stock manifold.
ALL CMI HEADERS ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 3-4 WEEKS
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> LT / Small Block Chevy E-Top Headers - Satin
Works as stock Mercury replacement or for most Stern Drives and Jet
boats. 4" Hose connection. Made from 316L Stainless Steel. Bolts
directly in the existing location of your stock manifolds. This is a single engine set and will directly replace both manifolds.
ALL CMI HEADERS ARE MADE TO ORDER AND SHIP FROM THE FACTORY IN 3-4 WEEKS
|
|
650-36270 Sport Tube/Sweeper Clamp Kit
This Kit includes:
- (1) Jumper Hose 1.125" ID, 180 Degree
- (2) Stainless Steel Hose Clamp #16
- (1) Sweeper V-Band Clamp
- (1) Sweeper Tail Gasket
|
|
650-41440 Stainless Steel Distributon Tube Kit for Big Tubes
|
|
650-50340 Standard Rope Seal
Rope Seal for CMI Headers, sold each.
Width is 1/2" and Length is 14 1/2"
|
|
|
|
|
|
|
|
650-32050 180 Deg. Jumper Hose I.I 3/4"
|
|
650-32200 180 Deg. Jumper Hose Big Tube, 1-3/8" I.D. - 4-5/8" Center to Center
|
|
650-32100 180 Deg. Jumper Hose, 1-1/8" I.D. - 3-1/4" Center to Center
|
|
650-32030 90 Deg. Hose for Distribution Tube, 3/4" ID on both ends.
|
|
650-34050 Adapter to Header 2-3/8" Big Tube Gasket
Sold Each
|
|
650-34060 Adapter to Header Gasket for 2-1/8", 2-1/4" Big Tube
Sold Each
|
|
650-36210
Big Tube V-Band Clamp / Rope seal type
|
|
650-36150 Big Tube/Big E-Top Clamp, T-Bolt
|
|
|
|
|
