Full Hydraulic Kits - Mayfair Marine

Mayfair's Full Hydraulic Steering Kit for Single Bravo with Single 9" Stroke Ram (17-3/4" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.

• 316L Stainless Steel modular wing plate steering mount.
• Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
• The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
• The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
• This arrangement gives additional support for even tighter, firmer steering control. 
• No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
• These new systems fit all generations of Bravo outdrives including the new "Slope Back" style. 
• it is recommended to use external power steering on boats which run in excess of 70 MPH.
• There are some boats that run 60 MPH that would benefit from the use of external power steering.
• Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2",  7-1/2"and 9-1/2" lengths!
• 80 ft. of hydraulic hose is included. See related parts if you need additional hose.

This kit includes:

• (1) 137-9150 - Inside Hydraulic Steering Kit -Single Bravo, Single Ram
• (1) 137-9259 - Mayfair Steering Ram Assembly 9" Stroke
• (1) 137-9443 - Mayfair Gen II Hydraulic Steering Wing Plate
• (1) 137-9XXX - Choice of Steering Post

Mayfair's Full Hydraulic Steering Kit for Single Bravo with Dual 9" Stroke Rams (17-3/4" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.

• 316L Stainless Steel modular wing plate steering mount.
• Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
• The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
• The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
• This arrangement gives additional support for even tighter, firmer steering control. 
• No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
• These new systems fit all generations of Bravo outdrives including the new "Slope Back" style. 
• it is recommended to use external power steering on boats which run in excess of 70 MPH.
• There are some boats that run 60 MPH that would benefit from the use of external power steering.
• Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2",  7-1/2"and 9-1/2" lengths!
• 80 ft. of hydraulic hose is included. See related parts if you need additional hose.

This kit includes:

• (1) 137-9151 - Inside Hydraulic Steering Kit - Dual Bravo or Single Bravo With Dual Ram
• (2) 137-9259 - Mayfair Steering Ram Assembly 9" Stroke
• (1) 137-9443 - Mayfair Gen II Hydraulic Steering Wing Plate
• (1) 137-9XXX - Choice of Steering Post

Mayfair's Full Hydraulic Steering Kit for Dual Bravo with Dual 9" Stroke Rams (17-3/4" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.

• 316L Stainless Steel modular wing plate steering mount.
• Ram Mounting Location is 17-3/4" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
• The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
• The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
• This arrangement gives additional support for even tighter, firmer steering control. 
• No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
• These new systems fit all generations of Bravo outdrives including the new "Slope Back" style. 
• it is recommended to use external power steering on boats which run in excess of 70 MPH.
• There are some boats that run 60 MPH that would benefit from the use of external power steering.
• Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2",  7-1/2"and 9-1/2" lengths!
• 80 ft. of hydraulic hose is included. See related parts if you need additional hose.

This kit includes:

• (1) 137-9151 - Inside Hydraulic Steering Kit - Dual Bravo or Single Bravo With Dual Ram
• (2) 137-9259 - Mayfair Steering Ram Assembly 9" Stroke
• (2) 137-9443 - Mayfair Gen II Hydraulic Steering Wing Plate
• (1) 137-9XXX - Choice of Steering Post

Mayfair's Full Hydraulic Steering Kit for Single Bravo with Single 7" Stroke Ram for Narrow Mounts (9" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.

• 316L Stainless Steel modular wing plate steering mount.
• Ram Mounting Location is 9" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
• The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
• The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
• This arrangement gives additional support for even tighter, firmer steering control. 
• No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
• These new systems fit all generations of Bravo outdrives including the new "Slope Back" style. 
• it is recommended to use external power steering on boats which run in excess of 70 MPH.
• There are some boats that run 60 MPH that would benefit from the use of external power steering.
• Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2",  7-1/2"and 9-1/2" lengths!
• 80 ft. of hydraulic hose is included. See related parts if you need additional hose.

This kit includes:

• (1) 137-9150 - Inside Hydraulic Steering Kit -Single Bravo, Single Ram
• (1) 137-9268 - Mayfair Steering Ram Assembly 7" Stroke
• (1) 137-9443 - Mayfair Gen II Hydraulic Steering Wing Plate
• (1) 137-9XXX - Choice of Steering Post

Mayfair's Full Hydraulic Steering Kit for Single Bravo with Dual 7" Stroke Rams for Narrow Mounts (9" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.

• 316L Stainless Steel modular wing plate steering mount.
• Ram Mounting Location is 9" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
• The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
• The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
• This arrangement gives additional support for even tighter, firmer steering control. 
• No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
• These new systems fit all generations of Bravo outdrives including the new "Slope Back" style. 
• it is recommended to use external power steering on boats which run in excess of 70 MPH.
• There are some boats that run 60 MPH that would benefit from the use of external power steering.
• Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2",  7-1/2"and 9-1/2" lengths!
• 80 ft. of hydraulic hose is included. See related parts if you need additional hose.

This kit includes:

• (1) 137-9151 - Inside Hydraulic Steering Kit - Dual Bravo or Single Bravo With Dual Ram
• (2) 137-9268 - Mayfair Steering Ram Assembly 7" Stroke
• (1) 137-9443 - Mayfair Gen II Hydraulic Steering Wing Plate
• (1) 137-9XXX - Choice of Steering Post

Mayfair's Full Hydraulic Steering Kit for Dual Bravos with Dual 7" Stroke Rams for Narrow Mounts (9" from Gimbal Housing) featuring the 316L Stainless Steel Modular Wing Plate that requires no modification to your outdrive.

• 316L Stainless Steel modular wing plate steering mount.
• Ram Mounting Location is 9" from the side of the Gimbal Housing allows for system to fit in applications where space is at a premium.
• The wing plate steering mount design incorporates dual side links and a single rear load cap that bolt together.
• The rear load cap captures the outdrives rear end cap while the side links attach to the outdrives four mounting points at the Gimbal housing.
• This arrangement gives additional support for even tighter, firmer steering control. 
• No dis-assembly of your outdrives rear end cap (Voids Factory Warranties) is required.
• These new systems fit all generations of Bravo outdrives including the new "Slope Back" style. 
• it is recommended to use external power steering on boats which run in excess of 70 MPH.
• There are some boats that run 60 MPH that would benefit from the use of external power steering.
• Your choice of 4", 6" or 8" fixed steering posts, or upgrade to tilt steering post in standard 5-1/2",  7-1/2"and 9-1/2" lengths!
• 80 ft. of hydraulic hose is included. See related parts if you need additional hose.

This kit includes:

• (1) 137-9151 - Inside Hydraulic Steering Kit - Dual Bravo or Single Bravo With Dual Ram
• (2) 137-9268 - Mayfair Steering Ram Assembly 7" Stroke
• (2) 137-9443 - Mayfair Gen II Hydraulic Steering Wing Plate
• (1) 137-9XXX - Choice of Steering Post

This is a replacement Mayfair Gen II Modular Hydraulic Steering Wingplate. Made from 316L Stainless Steel and highly polished.

This fits the Bravo drives both the square back and the slope back models.

Click here to see part drawing and replacement parts breakdown