Outdrives and Accessories - Outboard Aftermarket Parts

• Replaces Mercury OEM #32-842756005
• Made in the USA
• SOLD PER FOOT
• Available in Black only.

Fixed Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - White - Hose Not Included

Outboard Swivel Thru Hull Rigging Flange Kit - Fits 2" ID / 2.5" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector, (4) #10 attachment screws, 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Swivel Rigging Connector Only - Fits 2" ID / 2.5" OD Hose - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

Outboard Swivel Thru Hull Rigging Flange Kit - Fits Large 2.5" ID / 3" OD Hose

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin's new  non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 3/4" tall flange has a 5" diameter OEM factory mounting foot print. and requires a 3-3/8” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2-1/2" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished or powdercoated Stainless Steel trim ring both individually or as a kit with rigging hose.

Kits include a Transom swivel connector, (4) #10 attachment screws, 5' long 2-1/2' diameter premium corrugated black, gray or white rigging hose that is durable, flexible, and kink resistant to provide an excellent protection for cables and wiring from dirt, abrasion, sun and water. Our rigging hose is the hose of choice for most OEM boat builders.

Swivel Rigging Connector Only - Fits Large 2.5" ID / 3" OD Hose Version - Hose Not Included

While the rest of the world is stuck in just one spot Hardin Marine has taken on the challenge to design the freedom of movement for your outboards rigging hose connection. With more movement than ever from today's popular outboard engines when being trimmed or stored for travel the industry has been faced with kinked rigging hoses and cowling damage due to the rigid hoes connection option that has only been available until now.

Hardin new non-corrosive 2264 Delrin directional swivel hose connection provides 12 degrees of angle for hose/ tube movement and a water tight seal. With hidden non-exposed mounting hardware this unit features the ultimate in a clean smooth finish.

Attachment of the rigging hose couldn't be easier as the unit is threaded so that the rigging hose screws counter clockwise into the swivel ball connector requiring no additional hardware for hose attachment for the ultimate in finished appearance.

The 1" tall flange has a 5.37" diameter mounting foot print. and requires a 4” hole to install with (4) #10 fasteners (NOT included). The Connector assembly measures 2.36" overall installed height.

This Multi angle rigging tube connector is available in a OEM black finish or with an optional polished Stainless Steel, or powder coated trim ring both individually or as a kit with rigging hose.

New Pro-Flex Marine rigging hose is the most desirable in the industry. The combination of copolymer materials and two-part helically wound construction makes this rigging hose superior to others in the market. The new PRO-FLEX has all the characteristics riggers are looking for plus ultraviolet protection, smooth inner bore, crush resistance, flexibility, durability, light weight, and interlocking design.

SPECIAL FEATURES

• Two part helically wound 
• Doublewall smooth inner bore
• Special Proprietary UV protection 
• Smoothbore and crush resistant
• Flexibility and durability 
• Light-weight and interlocking design
• Produced from a proprietary polyolefin copolymer formulation using the highest quality material
• State-of-the-art automation blending process that ensures product consistency 
• Weight / ft 0.40lbs 
• Centerline bend Radius 4.5" with our 2" rigging hose 
• Made in the USA
• SOLD PER FOOT

****NOTE**** Our hose is performance based, doublewall rigging hose and is manufactured to exacting tolerance and size as the OEM like Mercury Racing, SEVEN Marine, Yamaha etc...

New Pro-Flex Marine rigging hose is the most desirable in the industry. The combination of copolymer materials and two-part helically wound construction makes this rigging hose superior to others in the market. The new PRO-FLEX has all the characteristics riggers are looking for plus ultraviolet protection, smooth inner bore, crush resistance, flexibility, durability, light weight, and interlocking design.

SPECIAL FEATURES

• Two part helically wound 
• UV protection 
• Smoothbore and crush resistant
• Flexibility and durability 
• Light-weight and interlocking design
• Produced from a proprietary polyolefin copolymer formulation using the highest quality material
• State-of-the-art automation blending process that ensures product consistency 
• Weight / ft 0.40lbs 
• Centerline bend Radius 4.5" with our 2" rigging hose 
• Made in the USA
• SOLD PER FOOT
• Currently only black, gray and white colors available. Check back soon for other colors.

****NOTE**** Our hose is performance based, doublewall rigging hose and is manufactured to exacting tolerance and size as the OEM like Mercury Racing,SEVEN Marine, etc...

****CAUTION***** Single wall and Import Hose and uses different thread pitch example: TH Marine.