Login
See us on:
Visit CP on Facebook Visit CP on Instagram Visit CP on YouTube
Is your boat in the gallery?
Image Gallery  
Instructions & Guides:
Instructions  
Find Parts by Mercury Model:
OEM Part Finder  
What's popular today?
Popular Items  
What are you looking for Today?

Need Help? Call Us:

1-800-225-9871

Outside the USA? Call 707-585-9871

Flywheels, Flexplates & Damper Plates - Damper & Drive Plates

DriveGaurdian Kit, NXT Damper Plate/DriveGaurd
Your Price:
$2,299.99

DriveGuardian Combo Kit, NXT Damper Plate / DriveGuard

221-100

DriveGuardian Kit, NXT Damper Plate/DriveGuard

Direct replacement for the factory NXT damper plate with a 1.375” shaft that has 26 splines. Heavy duty design with 8 springs and a solid backing plate that can withstand more torque than the OEM units.

DriveGuardian NXT is a patented device that improves the reliability of your NXT transmissions and drives. DriveGuardian reduces the torque spikes that are created each time the propeller becomes aerated or exits, and then re-enters the water after hitting a wave. These spikes are generated by the inertia of the rotating engine components and have been measured to be 2X-4X the actual torque output of the engine. These torque spikes far exceed the manufacturer’s torque rating for the NXT transmission and drive, which can lead to broken gears and twisted shafts. DriveGuardian is a torque-limiting clutch that absorbs the damaging torque spikes and protects your entire drivetrain. DriveGuardian has been proven on the racecourse with numerous National and World Championships in offshore powerboat racing.

This is a Packaged Price Deal

Make sure to fill out this calibration questionnaire when ordering.


High Performance Damper Plate
Your Price:
$399.99

High Performance Damper Plate

220-96116

High Performance Damper Plate

Heavy Duty - Similar to the standard duty but designed to take the punishment of a high performance engine. 26 Spline.

  • Overall Dia.: 13-1/4"
  • Spring Housing: 7-1/8"
  • Outer Lip: 9-1/2"
  • Inner Dia: 1-1/4"
  • Spline: 26
  • Thickness: 1-1/16"
OEM: Drive Plate Mercury 816618

Standard Duty Damper Plate
Your Price:
$225.99

Standard Duty Damper Plate

220-96115

Standard Duty Damper Plate

Standard Duty - These plates contain damper springs similar to a car clutch disc. These springs take the shock out of the shift. Not recommended for high performance applications.


DriveGuardian, Bravo
Your Price:
$1,499.99

Ultra HP Bravo Drive Coupler

221-1022

  • Made in the USA, patent pending
  • Anodized billet aluminum for maximum corrosion resistance, even in saltwater environments.
  • 100% rebuildable
  • Direct replacement for the OEM coupler, zero modifications required.
  • Chromoly splines that are stronger than the OEM coupler and can be replaced (for less $$ than purchasing a replacement OEM coupler) when required. 
  • Replaceable Polyurethane dampeners with external wear indicator
  • Rated for 1,000+HP
  • Perfect for diesel engines and applications that see extended idling (which is a common issue for the OEM coupler).
  • Unlike the OEM coupler, will not break loose and spin if the dampening material fails (Get Home Mode)
  • Two year warranty

DriveGuardian NXT
Your Price:
$1,995.99

DriveGuardian NXT

221-1030

DriveGuardian NXT

DriveGuardian NXT is a patented device that improves the reliability of your NXT transmissions and drives. DriveGuardian reduces the torque spikes that are created each time the propeller becomes aerated or exits, and then re-enters the water after hitting a wave. These spikes are generated by the inertia of the rotating engine components and have been measured to be 2X-4X the actual torque output of the engine. These torque spikes far exceed the manufacturer’s torque rating for the NXT transmission and drive, which can lead to broken gears and twisted shafts. DriveGuardian is a torque-limiting clutch that absorbs the damaging torque spikes and protects your entire drivetrain. DriveGuardian has been proven on the racecourse with numerous National and World Championships in offshore powerboat racing.

Prior to shipment, each DriveGuardian is mounted to a specially built dyno and load tested to ensure they meet strict manufacturing standards. Your DriveGuardian is then calibrated for your specific engine and drive combination.

DriveGuardian is manufactured using billet aluminum housings and Kevlar clutch plates. The clutch plates are replaceable and the typical rebuild interval for an offshore performance application is 500-600 hours. DriveGuardian NXT retains the OEM damper plate and is a direct bolt-on with no additional modifications required. Includes a 1-year Manufacturer Warranty.

Make sure to fill out this calibration questionnaire when ordering.


DriveGuardian SSM, Borg
Starting From:
$2,995.99

This Part has options, please click the button below to order.

DriveGuardian SSM, Borg

221-102 + Option(s)

SSM Borg Warner 1.375 x 26

DriveGuardian SSM is a patented device that improves the reliability of your transmissions and drives. DriveGuardian reduces the torque spikes that are created each time the propeller becomes aerated or exits, and then re-enters the water after hitting a wave. These spikes are generated by the inertia of the rotating engine components and have been measured to be 2X-4X the actual torque output of the engine. These torque spikes can easily exceed the ratings of your drivetrain components and lead to overheated transmissions, broken gears and twisted shafts. DriveGuardian is a torque-limiting clutch that absorbs the damaging torque spikes and protects your entire drivetrain. DriveGuardian has been proven on the racecourse with numerous National and World Championships in offshore powerboat racing.

Prior to shipment, each DriveGuardian is mounted to a specially built dyno and load tested to ensure they meet strict manufacturing standards. Your DriveGuardian is then calibrated for your specific engine and drive combination.

DriveGuardian is manufactured using billet aluminum housings, Kevlar clutch plates and include a heavy duty 8-spring damper plate. DriveGuardian replaces the factory flywheel and damper plate assembly and is available for either top or bottom mount starters. Standard units are neutral balance for crankshafts with two-piece rear main seals. Other combinations are available upon request. Installation is a direct bolt-on with no additional modifications required. Includes a 1-year Manufacturer Warranty.

Top or Bottom Mount Available

Make sure to fill out this calibration questionnaire when ordering.


DriveGuardian, Bravo
Your Price:
$2,695.99

DriveGuardian, Bravo

221-1015

Replaces Stock Coupler

DriveGuardian is a patented device that reduces the leading cause of pitted/broken gears and twisted shafts in Bravo sterndrives. DriveGuardian replaces the factory Bravo rubber coupler with a multi-plate torque-limiting clutch that is calibrated to your specific application. The cause of many gear and shaft failures is the enormous torque spike that is generated each time the propeller either partially or fully leaves the water, and then is re-submerged. These spikes are generated by the inertia of the rotating engine components and can be 2X-4X the actual torque output of the engine. Each spike lasts only a fraction of a second and throttling alone cannot eliminate them. Every spike causes stress to the gears and shafts which greatly reduces their usable life.

DriveGuardian has been proven on the racecourse with numerous National and World Championships in offshore powerboat racing.

Prior to shipment, each DriveGuardian is mounted to a specially built dyno and load tested to ensure they meet strict manufacturing standards. Your DriveGuardian is then calibrated for your specific engine and drive combination.

DriveGuardian is manufactured with billet aluminum housings and Kevlar clutch plates. DriveGuardian replaces the stock rubber coupler and installation is a direct bolt-on with no additional modifications required. Includes a 1-year Manufacturer Warranty.

Make sure to fill out this calibration questionnaire when ordering.


DriveGuardian SCS Crashbox
Your Price:
$2,995.00

DriveGuardian SCS Crashbox

221-1035

DriveGuardian SCS Crashbox, Top Mount Starter

DriveGuardian SCS is a patented device that improves the reliability of your drives. DriveGuardian reduces the torque spikes that are created each time the propeller becomes aerated or exits, and then re-enters the water after hitting a wave. These spikes are generated by the inertia of the rotating engine components and have been measured to be 2X-4X the actual torque output of the engine. While the SCS Crashbox has been proven to be nearly indestructible but these torque spikes can easily exceed the ratings of your drive and lead to broken gears and twisted shafts. DriveGuardian is a torque-limiting clutch that absorbs the damaging torque spikes and protects your entire drivetrain. DriveGuardian has been proven on the racecourse with numerous National and World offshore powerboat racing Championships.

Prior to shipment, each DriveGuardian is mounted to a specially built dyno and load tested to ensure they meet strict manufacturing standards. Your DriveGuardian is then calibrated for your specific engine and drive combination.

DriveGuardian is manufactured using billet aluminum housings, Kevlar clutch plates and include a heavy duty 8-spring damper plate. DriveGuardian replaces the factory flywheel and damper plate assembly and is available for either top or bottom mount starters. Standard units are neutral balance for crankshafts with two-piece rear main seals. Other combinations are available upon request. Installation is a direct bolt-on with no additional modifications required. Includes a 1-year Manufacturer Warranty.

Make sure to fill out this calibration questionnaire when ordering.


Heavy Duty Crashbox Damper Plate
Your Price:
$599.99

Heavy Duty Crashbox Damper Plate

221-1005

Heavy Duty Crashbox Damper Plate

  • 13-1/2 outside diameter mounting plate.
  • plate is .100 thick.
  • smaller bolt pattern: (8) 3/8 holes on 9" bolt circle
  • larger bolt pattern: (12) 3/8 holes on 12-5/8 bolt circle
  • part is 1-1/2 overall thickness
  • 2" x 10 Spline

Heavy Duty damper plate with eight cryo-treated springs and chrome moly backing plate. Built to withstand the extreme HP and torque of today’s high performance engines.


Heavy Duty NXT Damper Plate
Your Price:
$995.99

Heavy Duty NXT Damper Plate

221-1010

Heavy Duty NXT Damper Plate

NXT direct replacement Hi-Performance drive plate rated for 2,000 ft-lbs Chromoly hubs and Cryo treated springs. 1.375" 26 spline. HRS-A36 Plate.


ARP Pressure Plate Bolts – Chevy
Your Price:
$32.99

This Part has options, please click the button below to order.

ARP Chevy Pressure Plate Bolt Kit

860-230-2202

ARP Pressure Plate Bolts – Chevy

  • 3/8"-16
  • Chevy 265-502 V8

Engineered for your special application, ARP pressure plate bolt kits are the finest available and feature a large diameter, low profile head. Includes hardened washers. ARP High Performance Series bolts are made from a premium grade chrome moly and hardened to a nominal tensile strength of 180,000 psi. The Pro Series bolts, originally developed for NASCAR competition, are stronger and rated at 200,000 psi. 6/pkg.