620-10050 455 Olds Bellhousing, Top Mount Starter
Oldsmobile 1964-84, top mount starter bell housing.
|
|
620-10001 Berkeley / Dominator Bellhousing Adapter With Strap
This adapter is used on most Borg Warner bellhousings with a 6 bolt pattern to adapt to a 3 point jet drive application with a standard jet H-Bar 1310 driveline. 5" deep and fits a 4-7/8" rubber bearing cap mount ring.
|
|
430-531066 Chevy Bellhousing Borg Bottom Mount Starter Only
This Bellhousing allows the connection of the Velvet drive transmission by Borg Warner to a Chevy V-6 , small block and big block engines. For uses with bottom mount starter only. This Bellhousing is not machined for rear mount engine plate.
|
|
620-91151 Cover for Bellhousing Starter Hole, Raw Finsish. 4.12" bolt hole center to center. 5-1/4" Long, 3-3/4" Wide, 1/8" Height.
|
|
This Part has options, please click the button below to order.
755-8053 Dual Cooler Flywheel Housing Kits - Dual Cooler Flywheel Housing (Bellhousing Only, No Cooler Kits)
This is just one more example of how Keith Eickert Performance Products has taken a proven design and once again improved it even further. Here are a few of the key features that the Keith Eickert Dual Cooler Flywheel Housings offer. The traditional water crossover feature that caused so many problems (factory style bellhousings) with delivering enough water to the opposite engine side coolers has been eliminated. Torsional strengthening ribs have been added for unmatched strength and durability. This is a common failure point in a factory style bellhousing on high horsepower applications. Now the water is transferred through a 1-1/4" stainless transfer tube crossover system allowing complete unrestricted water flow to the oil cooler chambers. The improved water flow and cooling features don't stop there, the best part is the convenience of so many plumbing options from the top, bottom or back side for single or dual pass cooling options. The flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC machining, next each unit is hardcoat anodized for maximum corrosion resistance. Kits include a dual cooler flywheel housing, oil cooler cover plates, cooler adapter nuts, and stainless steel hardware. Oil plumbing sold separately.
Note: This bellhousing fits Chevrolet engines only. To be used with the Top Mount Starter #620-10060
For Replacement Parts, Click here.
|
|
This Part has options, please click the button below to order.
755-8054 Dual Cooler Flywheel Housing Kits - Dual Cooler Bellhousing with 13 Plate Port Cooler and 8 Plate Starboard Cooler
This is just one more example of how Keith Eickert Performance Products has
taken a proven design and once again improved it even further. Here are a
few of the key features that the Keith Eickert Dual Cooler Flywheel Housings
offer. The traditional water crossover feature that caused so many
problems (factory style bellhousings) with delivering enough water to the
opposite engine side coolers has been eliminated. Torsional strengthing
ribs have been added for unmatched strength and durability. This is a
common failure point in a factory style bellhousing on high horsepower
applications. Now the water is transferred through a 1-1/4" stainless
transfer tube crossover system allowing complete unrestricted water flow to the
oil cooler chambers. The improved water flow and cooling features don't stop
there, the best part is the convenience of so many plumbing options from the
top, bottom or back side for single or dual pass cooling options. The
flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC
machining, next each unit is hardcoat anodized for maximum corrosion resistance.
Kits include a dual cooler flywheel housing, high-flow multi-plate oil coolers,
oil cooler cover plates, cooler adapter nuts, and stainless steel hardware.
Oil plumbing sold separately.
Note: To be used with the Top Mount Starter #620-10060
|
|
This Part has options, please click the button below to order.
755-8060 Dual Cooler Flywheel Housing Kits - Dual Cooler Bellhousing with Dual 8 Plate Coolers
This is just one more example of how Keith Eickert Performance Products has
taken a proven design and once again improved it even further. Here are a
few of the key features that the Keith Eickert Dual Cooler Flywheel Housings
offer. The traditional water crossover feature that caused so many
problems (factory style bellhousings) with delivering enough water to the
opposite engine side coolers has been eliminated. Torsional strengthing
ribs have been added for unmatched strength and durability. This is a
common failure point in a factory style bellhousing on high horsepower
applications. Now the water is transferred through a 1-1/4" stainless
transfer tube crossover system allowing complete unrestricted water flow to the
oil cooler chambers. The improved water flow and cooling features don't stop
there, the best part is the convenience of so many plumbing options from the
top, bottom or back side for single or dual pass cooling options. The
flywheel housing is cast from 356-T6 aluminum and heat treated prior to CNC
machining, next each unit is hardcoat anodized for maximum corrosion resistance.
Kits include a dual cooler flywheel housing, high-flow multi-plate oil coolers,
oil cooler cover plates, cooler adapter nuts, and stainless steel hardware.
Oil plumbing sold separately.
Note: To be used with the Top Mount Starter #620-10060
|
|
620-91200 Mercury Bravo Bellhousing Kit
This kit includes a stock replacement bellhousing that replaces MerCruiser #865657A04, and an HP Coupler!
|
|
620-91150
- Bell Housing Style Engine Mount.
- Secure engine mount to Jet Pump.
- Ultimate in Top Mounting Starter Applications.
- Inspection cover 620-91146 included along with an SS mounting bolt kit.
|
|
421-04-2295B IMCO Heavy Duty Bravo Bellhousing
IMCO's new flywheel
bellhousing is a direct replacement for installations using Bravo, XR, XZ
and IMCO XTreme Advantage SC drives. The new bellhousing is
reinforced in all critical areas with additional gusseting around the
motor mount area. There is a flange at the top of the housing for
accessory mounting. Better....and still affordable.
|
|
620-10100 Polished Aluminum LS, Small & Big Block Chevy Bellhousing / Flywheel Cover
This is a fabricated billet style bellhousing traditionally used with plate
style engine mounts. The high quality construction allows attachment of
drive guards and covers. The bolt center to center diagonally across the opening is 6-1/2"
|
|
500-1640 Borg Warner Bellhousing Small & Big Block Chevy
This bellhousing allows the connection of any of the popular engine configurations to the velvet drive style transmission by Borg Warner. The depth of the bellhousing is 4-1/8th inches. This is a direct replacement of the bell housing MerCruiser made for inboard applications.
|
|
This Part has options, please click the button below to order.
620-10000 Tri-Starter Chevy Bellhousing
This bellhousing gives you three options for mounting a starter, which will allow you to perfect your starter setup. Torsional strengthening ribs have been added for superior durability and strength. This flywheel is cast from 356-T6 aluminum and then CNC machined. This bellhousing is thick enough to be machined for a 1/4" race plate. Has standard Borg Warner bolt pattern.
|
|
150-S01449 Rubber Mount
For use with Berkeley Bearing Cap and three point mount system
|
|
150-S15380 Three Point Bellhousing Strap
Replacement Strap for the 3 point bellhousing.
center to center measurment: 6-3/8"
|
|
620-91147 Bellhousing Inspection Hole Cover, 2-Bolt Pie Shaped, 3-1/2" Bolt Centers
Here are our cast aluminum starter and inspection hole covers to fit most
popular flywheel covers and bellhousings.
|
|
620-91149 Bellhousing Inspection Hole Cover, 4-Bolt Square 3-1/2" x 3-3/8" Bolt Centers
Here are our cast aluminum starter and inspection hole covers to fit most
popular flywheel covers and bellhousings.
|
|
700-21810 Motor Mount Bolt Kit replaces MerCruiser part # 10-97934A1
Kit Contains:
Part # |
MerCruiser # |
Description |
|
Part # |
MerCruiser # |
Description |
700-19310 |
10-97934 |
Bolt |
|
700-19320 |
12-35777 |
Washer |
700-19330 |
13-33734 |
Lockwasher |
|
700-19340 |
23-99299 |
Spacer |
700-19350 |
11-863332 |
Nut |
|
700-30020 |
12-32834 |
Fibre Washer |
|
|