• Highly polished heavy gauge stainless steel.
• Sold Each.
• Fits Hardin Marine hydraulic hatch actuators.
• Includes a 1/2" stainless steel actuator mounting bolt, washers, bushings and locknut.
• Fasteners for mounting the bracket to the boat and hatch are NOT included.
• Replaces 602-CM100

• Lessens stress put on mounting bracket.
• Prevents damage to your mounting bracket.
• Stops the hatch ram from over-contracting.
• Only to be used on 620-921018 and 620-921024.

• Marine grade stainless steel & aluminum construction
• 12 DC sealed electric motors, 2-wire simple hook-ups
• Compact Size, Light Weight, for Maximum Lifting Capacity
• Two Standard Length Cylinders with Simple Pin Mounts
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer
• Smooth Quiet Responsive Hydraulic Action with No-Coasting
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free
• Operating Temperatures 10 to 165 Degrees F
• System can Operate with Environmentally Responsible Fluid
• 18" Model  Dimensions: 26” Retracted Length, 44” Extended Length.
• NOTE: The 620-920016 is only bracket kit that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

• Marine grade stainless steel & aluminum construction.
• 12 DC sealed electric motors, 2-wire simple hook-ups.
• Compact Size, Light Weight, for Maximum Lifting Capacity.
• Two Standard Length Cylinders with Simple Pin Mounts.
• Heavy Duty Aluminum Clevis Mounts for Hatch and Stringer.
• Smooth Quiet Responsive Hydraulic Action with No-Coasting.
• Moving Capacity 500 lbs. on horizontal surface. Will lift 250 lb hatch when mounted vertically.
• 1” Cylinder. 
• System is virtually maintenance free.
• Operating Temperatures 10 to 165 Degrees F.
• System can Operate with Environmentally Responsible Fluid.
• 24" Model Dimensions: 32” Retracted Length, 56” Extended Length.
• NOTE: The 620-920016 is only bracket that will work with this ram. Most Brackets, pins and accelerators sold separately in the section WILL NOT WORK with this actuator. 

This kit includes Seals and O-rings for replacing worn-out ones in a Mayfair hydraulic steering ram.
Includes instructions.

NOTE: Fits 100% of Production Year 2000 and above Mayfair Rams, may work on other rams but NO guarantee.

• Extension is adjustable from 1 to 3 inches longer.
• Comes with mounting hardware.
• Extension for our hatch rams 620-920018, 620-920024, 730-SSA4, 730-SSA8, 730-SSA12, 730-SSA16.
• Inside Diameter is 1.150"

• Lessens stress put on mounting bracket.
• Prevents damage to your mounting bracket.
• Stops the hatch ram from over-contracting.

Mayfair Deluxe Inside Hydraulic Steering Kit - Dual Bravo or Single Bravo With Dual Rams

This kit includes:

• (1) Power Steering Dump Cap
• (1) Banjo Fitting
• (1) Power Steering Reservoir Tank
• Optional: (1) 4 Inch, 6 Inch, 8 Inch Steering Column
• (1) Hydraulic Helm Control Unit
• (4) 3/8" NPT Adapter
• (1) Remote Reservoir Hose Kit
• (82) Feet -6 AN Hydraulic Hose Line
• (13) -6 JIC Brass Hose Ends
• (2) -6 JIC X 1/4" NPT 90 Degree Fittings
• (2) -6 JIC X 3/8" NPT Straight Fittings
• (2) -6 JIC X 1/4" NPT Tee Fittings
• (1) Hi-pressure Power Steering Filter

The Mayfair by Hardin Marine full power steering system is supplied with all the highest quality components that are available today. This system will allow you to go from a Mercury add-on system to a full hydraulic power steering system. This will eliminate any back feed to the steering wheel that comes from a cable assisted steering system. Mayfair by Hardin Marine is now offering these full power steering systems for the new Mercury XR ITS system, and the #6 SSM Speedmaster, and Bravo. Included in the kit is a hydraulic helm control unit, option of no helm column or 4", 6" or 8" extreme billet steering column, remote reservoir, high pressure oil filter assembly, four special o-ring helm fittings, the new billet power steering pump cap, -6 high pressure hydraulic hose, hose ends, and complete instructions.

Mayfair Deluxe Inside Hydraulic Steering Kit -Single Bravo, Single Ram

This kit includes:

• (1) Power Steering Dump Cap
• (1) Banjo Fitting
• (1) Power Steering Reservoir Tank
• Optional: (1) 4 Inch, 6 Inch or 8 inch Steering Column
• (1) Hydraulic Helm Control Unit
• (4) 3/8" NPT Adapter
• (1) Remote Reservoir Hose Kit
• (82) Feet -6 AN Hydraulic Hose Line
• (9) -6 JIC Straight Brass Ends
• (2) -6 JIC X 1/4" NPT 90 Degree Fittings
• (2) -6 JIC X 3/8" NPT Straight Fittings
• (1) Hi-pressure Power Steering Filter

The Mayfair by Hardin Marine full power steering system is supplied with all the highest quality components that are available today. This system will allow you to go from a Mercury add-on system to a full hydraulic power steering system. This will eliminate any back feed to the steering wheel that comes from a cable assisted steering system. Mayfair by Hardin Marine is now offering these full power steering systems for the new Mercury XR ITS system, and the #6 SSM Speedmaster, and Bravo. Included in the kit is a hydraulic helm control unit, option of no helm column or 4", 6" or 8" extreme billet steering column, remote reservoir, high pressure oil filter assembly, four special o-ring helm fittings, the new billet power steering pump cap, -6 high pressure hydraulic hose, hose ends, and complete instructions.

• For Mercury Outboards with Existing Wingplate
• Replacement Ram Assembly
• 9" Stroke Ram
• (2) 16" SS Hoses, (2) Thru Hull Fittings, (2) Ram Fitting Included.