200 Foot Pound Bottom Mount Starter - Fits Both Small & Big Block Chevy Engines

This is the best choice for highly modified engines or where heat soak or space limitation is a concern. 200 lbs. of torque. 4.4:1 gear reduction ratio. Cranking power for up to 18:1 compression. Machined Billet Block Adapter, Clears Most Oil Pans. Includes two mounting bolts.

USCG Approved (SAE J1171)

AFR MAGNUM BBC Aluminum Cylinder Heads - Fully Assembled Heads (Pair)

AFR's MAGNUM line of cylinder heads for the big block Chevy are available in Rectangular Ports with 305cc, 325cc,  345cc, 357cc, 377cc and 385cc runners. All heads are made with A356 aluminum and are equipped with high quality components throughout. Component upgrades and different machining options are available to customize your AFR heads for your specific build. hile the combustion chambers are offered with partial or full CNC machining with a bowl blend. Capable of flowing 390 CFM at 0.700" of lift. These AFR heads are assembled (with parts).

• With some domed aftermarket pistons, it may be necessary to slightly clearance or modify the piston due to our more efficient heart shaped combustion chamber design. Most of the newer designed dome profiles will clear. AFR strongly recommends material be removed from the piston and not the cylinder head. Our combustion chamber shapes are very critical to flow and altering the cylinder head can adversely affect flow and power production. It is the customers responsibility to verify proper piston to head clearance.
• Heads are designed for 3/8" pushrods. Larger pushrods will not fit without clearancing and is not recommended since some areas are very thin. AFR recommends the use of .120" thick-wall pushrods.
• For ideal geometry and wipe pattern AFR strongly recommends stud mount rockers part for applications below 7400 RPM and .790 lift. For applications above these limits shaft mount rockers are typically advised.

AFR MAGNUM BBC Aluminum Cylinder Heads - Bare Heads (Pair)

AFR's MAGNUM line of cylinder heads for the big block Chevy are available in Rectangular Ports with 305cc, 325cc,  345cc, 357cc, 377cc and 385cc runners. All heads are made with A356 aluminum and are equipped with high quality components throughout. Component upgrades and different machining options are available to customize your AFR heads for your specific build. hile the combustion chambers are offered with partial or full CNC machining with a bowl blend. Capable of flowing 390 CFM at 0.700" of lift. These AFR heads are bare (without parts).

• With some domed aftermarket pistons, it may be necessary to slightly clearance or modify the piston due to our more efficient heart shaped combustion chamber design. Most of the newer designed dome profiles will clear. AFR strongly recommends material be removed from the piston and not the cylinder head. Our combustion chamber shapes are very critical to flow and altering the cylinder head can adversely affect flow and power production. It is the customers responsibility to verify proper piston to head clearance.
• Heads are designed for 3/8" pushrods. Larger pushrods will not fit without clearancing and is not recommended since some areas are very thin. AFR recommends the use of .120" thick-wall pushrods.
• For ideal geometry and wipe pattern AFR strongly recommends stud mount rockers part for applications below 7400 RPM and .790 lift. For applications above these limits shaft mount rockers are typically advised.

BBC 1.900 x 1.850 Square Port MLS Exhaust Manifold Gaskets - Sold in Pairs

• Port Style: Stock
• Gasket Material: Multi-layer steel
• Port Height (in): 1.900 in.
• Port Width (in): 1.850 in.
• Thickness (in): 0.030 in.

The Cometic Severe Duty Multi Layer Series exhaust gaskets are comprised of three separate layers of stainless and steel. Cometic uses stainless steel for increased strength and its ability to rebound from heat compression, plus excellent corrosion resistance. The outer layers of the gasket are embossed and coated. This is designed to meet the demands of a variety of harsh sealing environments, load conditions and surface finishes.

The Severe Duty MLS exhaust gasket is ideal for both aluminum heads & cast iron heads as well as cast iron and aluminum blocks. The composition of MLS gaskets will also withstand the shearing forces created by aluminum heads on cast iron blocks. No re-torque is required and by design promotes an even torque load across the sealing surface.

Sold in Pairs

Take the hassle out of getting the correct parts and adapters to relocate your oil filter. This kit includes the correct fittings, hose, block adapter and remote filter head for a 1000HP BBC Gen. 4 application. The Xtreme edition kit includes the HP remote oil filter head,  and push on hose with the appropriate fittings.

Note: Uses -12 AN fittings.

Take the hassle out of getting the correct parts and adapters to relocate your oil filter. This kit includes the correct fittings, hose, block adapter and remote filter head for a BBC Gen. 4 application. The Xtreme edition kit includes the HP remote oil filter head,  and nylon braided hose with the appropriate fittings.

Note: Uses -12 AN fittings.

Take the hassle out of getting the correct parts and adapters to relocate your oil filter. This kit includes the correct fittings, hose, block adapter and remote filter head for a BBC Gen. 4 application. The standard edition kit includes the HP remote oil filter head, thermostatic adapter and push on hose with the appropriate fittings.

Note: Uses -12 AN fittings.

Take the hassle out of getting the correct parts and adapters to relocate your oil filter. This kit includes the correct fittings, hose, block adapter and remote filter head for a BBC Gen. 4 application. The Xtreme edition kit includes the HP remote oil filter head, thermostatic adapter and nylon braided hose with the appropriate fittings.

Note: Uses -12 AN fittings.

Take the hassle out of getting the correct parts and adapters to relocate your oil filter. This kit includes the correct fittings, hose, block adapter and remote filter head for a BBC Gen. 5/6 application. The standard edition kit includes push on hose and the appropriate fittings.

Note: Uses -12 AN fittings.