462-35-HM6 Strong, lightweight and have non-conductive plastic clad design which floats. Vinyl clad shaft will not splinter or crack. Unique double-ball design permits pushing, pulling and retrieving without slipping. Guaranteed for 5 years. Red handle. Length: 6', Case: 10
|
|
462-35-CV112 For 1-1/2" flexible hose to reduce back pressure and facilitate easier pumping.
|
|
462-35-PF100SB One piece construction for flat or curved surfaces. Smoked lens with Black interior trim ring.
Size: "ID: 3-1/4" x 21-1/4" / OD: 5-1/2" x 23-1/2"
Sold: Each
|
|
462-35-DP63W "An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners."
ID: 6-3/16", OD: 8-1/8", Hole: 6-1/2", Color: White, Center: Non-Skid
Sold: Each
|
|
462-35-DP81W "An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners."
ID: 7-5/8", OD: 10", Hole: 8-3/8", Color: White, Center: Smooth
Sold: Each
|
|
462-35-DP61W "An extra heavy "O" ring to assure watertight fit. To be installed in areas where internal pressure (oil-canning) is NOT present. Ideal for inspection compartments, for clean out or access to shut off valves, back-up fasteners."
ID: 6-3/16", OD: 8-1/8", Hole: 6-1/2", Color: White, Center: Smooth
Sold: Each
|
|
462-35-PO714DWC20 "Rain Drain™ opening ports are designed primarily for installation where other ports would collect rain and spray. Rain Drain™ ports cut at 5/8" will drain at angles up to 45°. 2" drain spigot. Black frames feature smoke lens, White have clear lens."
Size: "Frame: 9-3/4" x 6-3/4", Cut Out: 7-1/2" x 14-3/8", Color: White
Sold: Each
|
|
462-35-PO512D + Option(s) "Rain Drain™ opening ports are designed primarily for installation where other ports would collect rain and spray. Rain Drain™ ports cut at 5/8" will drain at angles up to 45°. 2" drain spigot. Black frames feature smoke lens, White have clear lens."
Size: "Frame: 7-3/4" x 14-5/8", Cut Out: 5-1/2" x 12-1/2",
Color: Black or White
Sold: Each
|
|
462-35-SA4 "Designed for attaching ventilation hose to deck for use with Beckson "C" series vents." Description: "Screw on for 4" Hose" Sold: Each
|
|
462-35-DP44W Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
ID: 4", OD: 6-1/8", Hole: 5-1/2", Color: White, Center: Diamond
Sold: Each
|
|
462-35-DP62W Beckson screw-out plates provide access without the use of tools, with a single start, non-jamming (no cross-thread), extra strong, self-cleaning buttress thread. They incorporate a self-aligning center and an innovative gasket to assure a watertight seal. A unique back-up sealing wall leaves the plate water resistant, even if the gasket is removed.
ID: 6", OD: 8-1/8", Hole: 6-1/2", Color: White, Center: Non-Skid
Sold: Each
|
|
462-35-318P1FPS3R Float-A-Pump sleeve. Designed specifically with the sea-kayaker in mind. Includes an aluminum reinforcing shaft which prevents the pump shaft from flexing in a rolling sea and won't effect a compass. GPM: 8, Size: 18" L x 1-3/4" Dia.
|
|
462-35-C White ABS vent cap with vent hose adapter that mounts to deck. Vents snaps into place on adapter.
- Description:
C7 for 3" hose"
C8 for 4" hose
- Size: 6-1/4" x 5-1/2" x 2-1/2"
- Sold: Each
|
|
462-35-SC7 PVC. Ideal for areas where vent will be under foot or foul lines. Size: 4-7/8" x 5-1/8" x 2"
|
|
462-35-HH61 HH6: Safety-soft flexible PVC prevents injuries. Designed to hold beverage cans, bottles, air horns, etc. Uses screws to mount. HH61: This is a two step model, molded from soft flexible PVC. The inner step holds cans and air horns like the HH-6, but the outer step holds can with insulators, wine bottles, etc. Uses screws to mount. Size: 3-1/2" D x 3" W x 5" H" Sold: Each
|
|
462-35-HH6 HH6: Safety-soft flexible PVC prevents injuries. Designed to hold beverage cans, bottles, air horns, etc. Uses screws to mount. HH61: This is a two step model, molded from soft flexible PVC. The inner step holds cans and air horns like the HH-6, but the outer step holds can with insulators, wine bottles, etc. Uses screws to mount. Size: 2-3/4" D x 3" W x 4-1/2" H" Sold: Each
|
|
462-35-HH8 Is soft PVC. Design to hold hand held radios or phones. Perfect for storage on board any vehicle. White. : Sold: Each
|
|
462-35-HH81 Perfect for radios, GPS and cellular phones. Color: White Sold: Each
|
|
462-35-118PH Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA. GPM: 6, Description: 10 Stroke/Gal., Size: 18" L x 1-1/4" Dia., Hose: 20" Tube Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal.
|
|
462-35-124PF Self-priming and self-lubricating. Easy to clean. Will not mar boat. Solvent welded construction. Will withstand temperature to 120°. Special all polyvinyl body and shaft. Non-conductive, non-corrosive. With seal. Made in USA. GPM: 10, Description: 6 Stroke/Gal., Size: 24" L x 1-3/4" Dia.", Hose: 24" Flexible" Sold: Each
|
|