462-23-5040R7 "For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.
Size: 2-3/8" dia. x 1-7/16" vertical height."
Type: Port, Lens: Red, Housing: Black, Case: 6
Sold: Each
|
|
462-23-5040G7 "For use on boats up to 39.4' (12 m) in length, provides 1-mile visibility. Twist/bayonet lock design secures lens and cover to base. Includes an 8-watt wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Install directly to deck with (2) #10 fasteners. Cover and lens conceal installation fasteners and seal out water. Lights are visible 112.5°.
Size: 2-3/8" dia. x 1-7/16" vertical height."
Type: Starboard, Lens: Green, Housing: Black, Case: 6
Sold: Each
|
|
462-23-5080G7 Pulsar Sidelight w/Raised Base, Green
"For use on boats up to 39.4' (12m) in length, Provides 1 mile visibility. For use where the light must be elevated for visibility above rails and carpeting.
- Twist/bayonet design secures lens and cover to base
- 7" wire leads connect to 12V power supply
- 3" high. Black housing
- Includes 9-watt wedge base lamp
- Sold individually, not as pairs
"
Type: Starboard, Lens: Green
Sold: Each
|
|
462-23-5080R7 Pulsar Sidelight w/Raised Base, Red
"For use on boats up to 39.4' (12m) in length, Provides 1 mile visibility. For use where the light must be elevated for visibility above rails and carpeting.
- Twist/bayonet design secures lens and cover to base
- 7" wire leads connect to 12V power supply
- 3" high. Black housing
- Includes 9-watt wedge base lamp
- Sold individually, not as pairs
"
Type: Port, Lens: Red
Sold: Each
|
|
462-23-20277 The new low profile flush hatch pull is an easy access handle for installation in lids, doors, compartments and hatches. Handle is easy to grip, even with gloved hands. Durable ABS construction with black textured finish. 3-5/8" L x 2-5/16" W
Color: Black, Fastener: #6
|
|
462-23-6724051 Replacement 360 Degree Globe For Series 6700
Replaces: 360 Globe, early models, Fits: 6700, Pkg.: Bulk, Case: 6
Sold: Each
|
|
462-23-9115261 These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover. Description: Replacement Cover f/1670, Black Sold: Each
|
|
462-23-91017B7 Spare Glove
Replaces: All-round, frosted globe, Fits: 5100, 5110, 7100, 7101, 7105, 7109, 7205, 910958 & 910957, Pkg.: Clam Shell, Case: 3
Sold: Each
|
|
462-23-38763 Mounts on transom slightly above water line to provide a water exit for boats with self-bailing cockpits. Flapper valve opens outward to allow water out of boat when necessary but seals back to prevent water from entering. Acetal construction. Accommodates 3875B thru-transom thru-hull connector (screw holes must be drilled for installation). Use as a replacement valve for 3881 thru-transom scupper.
Caution: Thru-hull connectors are designed for installation above the water line only. Size: 2-7/8" dia." Sold: Each
|
|
462-148-SP429RB Shock-Eze, a spring-loaded transom saver, is designed to reduce damaging effects of road shock. Works great for motors with hydraulic trim/tiltDeluxe head with composite heads. - Black coated tube
- Bolt or roller mounting bracket
- Supports weight of the motor
Mount: Roller/Bolt, Length: 31"-40" - Deluxe head with composite heads and back coated tube
- Bolt or roller mounting bracket
Shock-Eze, a spring-loaded transom saver, is designed to reduce damaging effects of road shock. Supports weight of the motor. Works great for motors with hydraulic trim/tilt.
|
|
462-23-66319G7
- Stainless steel. Provide 1-mile visibility for boats up to 39.4' in length
- Includes 8-watt lamp. Installs with (3) #6 fasteners (not included)
- 112.5° Visibility
- Size: 2-1/2"L x 2-1/4"W x 1-1/2"H
Type: Starboard - Deck mount, Lens: Green
|
|
462-23-66319R7 "
- Stainless steel. Provide 1-mile visibility for boats up to 39.4' in length
- Includes 8-watt lamp. Installs with (3) #6 fasteners (not included)
- 112.5° Visibility
- Size: 2-1/2"L x 2-1/4"W x 1-1/2"H
"
Type: Port - Deck Mount, Lens: Red, Case: 6
Sold: Each
|
|
462-23-117 + Option(s) A strong, light weight rope that is used in many different applications. All polypropylene fibers are UV stabilized to provide resistance to fading and degradation from the sun's ultraviolet rays. It floats and is resistant to rot, oils, gasoline and most chemicals. The Monofilament fiber gives the rope a smooth velvety feel.
- 100% Multifilament Polypropylene
- Easy to handle
- Stays flexible throughout its life
- UV resistant floatable line
Colors: Red, Blue, Black
Sold: Each
|
|
462-23-90821 "Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black. Small: For smaller batteries like Series 16 and those used in Jet skis and lawn equipment. Large: For larger applications. 9-3/4" maximum battery height."
Fits: Group 16, OD: 11" L x 7-1/2" W x 8-3/4" H", Case: 12
Sold: Each
|
|
462-23-116704 Formed, chrome-plated steel wire drink holders are ideal for boats, cars, and RVs. Gimbaled surface-mounting bracket keeps drinks level to prevent spills. Includes mounting screws. Size: Standard, can cooler not included, Case: 6 Sold: Each
|
|
462-23-83154
- Ideal for bass boats and runabouts
- Comfortable firm grip, soft, black PVC outer rim and high-impact, one-piece plastic inner core
- Non-magnetic
- Black plastic center cap
- 3-3/8" dish.
- Diameter: 13"
- Fits standard 3/4" tapered shaft.
|
|
462-23-111505 Telescoping adjustment collar has molded ribbing - easy to grip and twist for length adjustment, even when wet. High-quality 6061-T6 aluminum tubing with marine finish and rubber vinyl grips. Hook includes non-marring polyethylene tips Length: 3-1/2" to 5-1/2", Case: 2 Sold: Each
|
|
462-23-38753 Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White. Hose: 1-1/2", Flange: 3", Max Hull Thickness: 1-1/4", Pkg.: Card Sold: Each
|
|
462-23-38743 Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White. Hose: 1-1/8" - 1-1/4", Flange: 2-1/4", Max Hull Thickness: 1-1/4", Pkg.: Card Sold: Each
|
|
462-23-38963 Molded of rugged plastic. Will not rust, corrode, discolor or contribute to electrolysis. Design eliminates hull streaking and allows countersinking wherever a flush fit is required. White. Hose: 3/4", Flange: 2", Max Hull Thickness: 2", Pkg.: Card Sold: Each
|
|
