462-23-16703 These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover. Type: Black, Hose: 5/8" I.D., Max Hull Thickness: 9/16", Hole: 3/4", Pkg.: Retail These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Installs easily and permanently. Made of flame-retardant black plastic with black vent head/cover.
|
|
462-23-16711 These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover. Type: White, Hose: 5/8" I.D., Max Hull Thickness: 9/16", Hole: 3/4", Pkg.: Bulk These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Installs easily and permanently. Made of flame-retardant black plastic with black vent head/cover.
|
|
462-23-16073 Patented splash-resistant, corrosion-resistant polypropylene. Meets ABYC ventilation specifications. All Attwood fuel tank vents meet or exceed U.S. Coast Guard regulations. Hose: 5/8", Max Hull Thickness: 7/8", Hole: 3/4", Color: Black, Pkg.: Retail Sold: Each
|
|
462-23-660313 316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets. Type: Straight, Hose: 5/8" I.D.", Max Hull Thickness: 7/8", Hole: 1-3/8" Sold: Each
|
|
462-23-660323 316 Stainless Steel. On the exterior, they have a smooth edge over the competition. There is no protruding cap to cause damage- or be damaged by- hull bumps or scrapes. Cap unscrews with hex head wrench for easy cleaning of filter and pressure testing of entire fuel system. Includes two silicone gaskets. Type: 90°, Hose: 5/8" I.D.", Max Hull Thickness: 7/8", Hole: 1-3/8" Sold: Each
|
|
462-23-664193 These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Meets ABYC Standard. Installs easily and permanently. Made of flame-retardant black plastic with choice of black, white, or stainless steel vent head/cover. Type: SS, Hose: 5/8" I.D., Max Hull Thickness: 9/16", Hole: 3/4", Pkg.: Retail These vents help prevent water from entering the fuel tank, yet allow air to vent freely, during normal sea conditions and washdowns. This eliminates the need for an anti-siphon loop in the vent hose. Installs easily and permanently. Made of flame-retardant black plastic with black vent head/cover.
|
|
462-23-145821 The filter funnel features fine mesh filters that filter out most foreign particles. Non-splashing. Lightweight floating polyethylene plastic construction. Description: Short rigid with handle Sold: Each
|
|
462-23-664065 "316 stainless steel for 1-1/2" hose. Imprinted with "Gasoline". Flush cap is slotted for a key and is O-ring sealed. Cap is attached by a SS beaded chain. 3-1/4" long fill neck."
Type: Gas, Hose: 1-1/2" I.D."
Sold: Each
|
|
462-23-116354 Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining. Color: Black, Size: 4" H x 4-3/8" W", Case: 6
|
|
462-23-116314 Self-leveling drink holders with slot for coffee cup handle. For boats, cars, and RVs. Molded plastic. Includes gimbaled surface-mounting bracket. Self-draining. Color: White, Size: 4" H x 4-3/8" W", Case: 6
|
|
462-23-660273 Stainless steel with removable pin so that hatches can be completely removed without removing hinges. Pre-drilled for 8 screws. Skin packed.
Size: 3" x 2-13/16", Fastener: #10
|
|
462-23-124613 Holds hatch or motor box open, bends to close. Flush mounting dimensions: 7/16" diameter spring x 8-3/4" long predrilled for #8 screws. Stainless steel.
|
|
462-23-47304 "Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty" GPH: 1700, Hose: 1-1/8" I.D.", Volts: 12, Amps: 5.1 Sold: Each
|
|
462-23-47604 "Heavy-Duty bilge pumps integrate the highest quality bearings, brushes, alloys and magnets designed to withstand extreme usage cycles. The pump employs an exclusive shaft and motor compartment, reducing wear and significantly extending pump life. Enhanced Stainless steel motor shaft resists corrosion. Advanced resin compositions incorporated in exterior to resist chemicals such as engine oil, aggressive detergents and hose plasticizers. Unsurpassed durability and efficiency in a compact design. Locking tab and base swivel feature for unique mounting positions. Rotating outlet for improved hose installation. 36" wire leads. CE rated. 3-Year Warranty" GPH: 2000, Hose: 1-1/8" I.D.", Volts: 12, Amps: 6 Sold: Each
|
|
462-148-SP424ADJRB - Pro-adjustable head, clear anodized tube
- Supports the cantilevered weight of the motor
- Stabilizes engine and steering mechanism when trailering
- Protects transoms by stabilizing engine and steering mechanism while trailering
- Adjustable toggles with replaceable rubber pads
Mount: Roller/Bolt, Length: 32"-44", Pkg.: Packaged - Pro-adjustable head, clear anodized tube
- Supports the cantilevered weight of the motor
- Stabilizes engine and steering mechanism when trailering
- Protects transoms by stabilizing engine and steering mechanism while trailering
- Adjustable toggles with replaceable rubber pads
|
|
462-23-90841 "Vented. Four cable openings, enlarged to .55" diameter. Large handles with rolled edges. Meet ABYC standard E-10 and USCG specification # 183.420. Polypropylene construction for total acid resistance. Mounting hardware included. Black. Small: For smaller batteries like Series 16 and those used in Jet skis and lawn equipment. Large: For larger applications. 9-3/4" maximum battery height."
Fits: Group 29/31, OD: 18-3/4" L x 9-1/4" W x 10-1/4" H ", Case: 6
Sold: Each
|
|
462-23-554054A7 Provides 2-mile, 360° visibility for boats up to 39.4 feet. 3 watts at 12VDC and rated for 50,000+ hours of use. LED lights are completely sealed and watertight. 10-year warranty. Compatible with both Attwood and Perko bases. Use with 2-pin locking collar pole.
Length: 54"
Sold: Each
|
|
462-23-140647 Complete kit includes: two multi-functional (stop/tail/turn) submersible low-profile LED trailer lights, license plate bracket, wiring harness, installation hardware, and instructions. Ideal replacement or upgrade for most trailers. Conforms to applicable U.S. FMVSS and Canadian CFMVSS standards. : Sold: Each
|
|
462-23-140657 "Complete kit includes two multi-functional (stop/tail/turn) submersible LED trailer lights, license plate bracket, wiring harness, installation hardware and instructions. For use with trailers under 80" wide. Conforms to U.S. FMVSS & Canadian CFMVSS standards" Case: 2 Sold: Each
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Lumens: 800 Volts: 12, Amps: 0.43
- Exclusive Heat-Sync Cooling System with Active Overheat Protection
- Resistant to corrosion, chemicals, and UV Damage
- Extreme impact-resistant lens
- 3" sheathed wire
- Reverse polarity protection
- Fully-sealed waterproof electronics
- Simple installation
- Low-profile design
- CE Certified
|
|
