462-383-1200300 2" Exhaust Thru-Hull, White w/Flapper Color: White, Hose: 2" , Length: 4-1/2"
|
|
462-379-00BBV200LP Bronze, full flow drain & grounding screw. Hard chrome bronze ball and vinyl coated stainless steel handle. Pipe: 2" IPS
|
|
462-274-203380 Waterproof and sealed. Round, clearance/side marker light with flush mounted rubber grommet designed for quick and easy installation. Rugged ABS base that has the acrylic lens sonic welded to the base. 2-Wire 6" pigtails. These replacement lights are 2" in diameter and require a rubber grommet (not included) for mounting. Lens: Amber , Size: 2" Dia.
|
|
462-3-99181 Sport/Diver Ladder Transom Extension Shim, 2" Description: 2" Transom Mt. Extension Shim, Size: 2-3/4?W x 3-5/8?H x 2"D
|
|
462-37-7710810 Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type. Made in U.S.A. NOT TO BE USED IN POTABLE WATER SYSTEMS. Pipe: 2" IPS, Case: 1 Comes with mounting pads. Use where full flow is required. Bronze body. Chromium plated ball. Reinforced TFE seats & stuffing box ring. Blow out stem design. Stainless steel lever and nut. Meets WW-V-35C Type II. BRZ style type.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-354-154250 Stainless Steel Snap Hook
A: 2", B: 7/16", C: 1/4"
Sold: Each
|
|
462-34-ARG2000SBSPP Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass. NOT TO BE USED IN POTABLE WATER SYSTEMS. Ports: 2" NPT, Basket: Stainless, A: 14", B: 7.3", C: 7.8", D: 2.8" Standard single strainers. No tie rods or leaks under pressure or vacuum. Quick and easy mounting system allowing removal of strainer without tools. #304 Stainless steel filter basket. O-ring seals at strainer cap and between strainer head and sight glass. See-thru screw-on strainer cap allows easy, no-tools maintenance. Spanner wrench holes in cover allow the use of SW-2531 wrench. Install with pipe or hose. Do not use chemical or abrasive cleaners on sight glass.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-34-TH200W Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut. NOT TO BE USED IN POTABLE WATER SYSTEMS. Thread: G 2", A: 3.90", B: 0.30", C: 3.33" Should have threaded portion cut to proper length considering hull and butt block thickness. Consider thread depth when using a seacock. Sealant is recommended between hull and thru-hull flange. Has locknut with bonding screw. Comes with nut.NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-383-1500008 Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better. Use above or below the waterline. A1: 2, A2: 2, B: 2, D: 6.35, F: 1.5, H: 6.13 Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. For Gas/Diesel fuel type inboards, sailboats & generator applications. Sound rating: Better. Use above or below the waterline. Exceeds ABYC specifications.
|
|
462-88-1462000 Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.Do not use ethylene glycol based antifreeze in hose. Do not use in pressurized water systems. ID: 2", Length: 100' Shields Vac Extra Heavy Duty/Commercial Grade Hose has a smooth cover and clear FDA formula PVC with a white vinyl helix. It is rated for full vacuum and is resistant to mild chemicals and saltwater. This hose is primarily used for bilge pump intake and discharge, potable water tank fill, drains (sinks, shower, and scupper), livewell intake and drain, and sanitation (intake, vent and pump out). This hose is utilized for below the waterline connections.
|
|
This Part has options, please click the button below to order.
542-130-7489-02CN 2" x 10-5/8" Onan Heat Exchanger
|
|
This Part has options, please click the button below to order.
542-46578CN 2" x 17" Westerbeke Heat Exchanger w/mounts CuNi
|
|
462-383-1200333 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 2" x 6" W x 5-3/4" H
|
|
This Part has options, please click the button below to order.
542-816074-T 2" x 21" Mercruiser Engine Oil Cooler
Engine Oil Cooler 465 500 Bulldog 525 SC GenV Race Sterndrive
|
|
This Part has options, please click the button below to order.
542-24865265 2" x 32-½" Perkins Heat Exchanger Bowman
|
|
462-383-1500107 Extremely effective in reducing engine exhaust noise and preventing water from returning to the engine. High strength design provides a significant safety margin over other existing fiberglass lift mufflers. Exceeds ABYC specifications. For Gas/Diesel fuel type Inboards, Sailboats & Generator applications. Sound rating: Better, Use above or below the waterline. A1: 2, A2: 2, B: 2, D: 10.04, E: 5.3, F: 2.5 Sold: Each
|
|
462-383-1500043 For inboards, sailboats and generator applications. Gas/Diesel fuel types. For above or below the waterline. A1: 2, A2: 2, B: 2, C: 14.0", D: 8.36" dia., E: 6.18 offset
|
|
462-239-0057901 Patterned after anchors used to secure oil rigs in the North Sea. Can be used very effectively in a variety of sea beds and remains stable under a variety of tide and wind conditions. Stows easily. Cast Steel. Weight: 2.2 lbs., Boat Size: 10'
|
|
462-57-70216 Three-bolt mount
Kit includes wiring harness to replace conventional starter - Three-bolt mount
- Kit includes wiring harness to replace conventional starter
Description: Replaces: O.M.C. 988012, will also replace ARCO Part #70116 Sold: Each
|
|
462-383-1200215 These fittings are made of the same fiberglass and fire retardant resins used to make Vernatube. Fittings, couplings and elbows are lightweight, strong, non-corroding and durable. OD: 2-1/2", Length: 7-3/4" Sold: Each
|
|
