462-239-0057907 Weight: 16-1/2 lbs., Boat Size: 30'
|
|
462-189-01674001 These cartridge pumps are equipped with the Ultima electronic float switch with patented Mirus field effect detector cells for problem free automatic operation. Easy-to-install Dura-Port discharge ports eliminate stress cracking caused by over-tightened hose clamps. Pumps include both a straight and a 90° smooth elbow and a removable check valve. Made in USA. " - Prewired to digital, on demand ultima switch
- High volume pump more GPH than competitive pumps
- Low amp draw, approximately an amp less draw than similar options
- Comes with 1-1/8" & 1-1/4" internally threaded duraports
- Includes removable check valve
- Adaptable to Rule bases
- 3 Year warranty
" GPH: 1600, Hose: 1-1/8" & 1-1/4", Volts: 12, Amps: 7
|
|
462-639-230818 Insulation grip. (.250 Tab Size).
Wire Range: 16-14, Connection: Female, Color: Blue
|
|
This Part has options, please click the button below to order.
MULTIPLE PART NUMBER OPTIONS. CLICK PART OPTIONS FOR MORE INFO -> Tinned copper for maximum current flow and corrosion resistance. Adhesive lined heat shrink tubing shrinks to form a tight seal and the ultimate in vibration and strain relief. Wire Range: 16-14, Fastener: 8, Pack: 25 Sold: Each
|
|
462-639-230819 Insulation grip. (.250 Tab Size).
Wire Range: 16-14, Connection: Male, Color: Blue
|
|
462-122-RP18 "Durable orange polyurethane. Will not mark or discolor boat. Cut and abrasion resistant. Will not "flat spot" even after months of storage. Roller is unaffected by grease, oil, gasoline, exhaust fumes, salt, etc. No bushings to pop out. Continuous bearings and reinforcing tubes on rollers over 7" long are completely enclosed in polyurethane. Shafts should be greased at installation." Size: 18", Hole: 5/8", Reinforcing Tube: Yes, Case: 15 Sold: Each
|
|
695-AO18MOTO 18 Pack Saddle Bags
AO Coolers Soft Cooler is perfect for boating, fishing, hunting, parties, sporting events, picnics, and more. Bringing an item for dinner or a potlock? Use this cooler to keep things warm as well. The cooler even meets airplane carry-on requirements. It features a removable shoulder strap, clip-down ends, and a side pocket for dry items. AO Coolers are guaranteed to never leak or sweat and have twice the insulation of other soft-sided coolers. The inner insulation is 3/4-inch thick, high-density, closed cell foam. The combination creates a cooler that will hold ice for 24 hours in 120-degree heat. With our soft exterior, it won’t scratch up your gel coat or tear up any upholstery.
|
|
462-58-4402 Rock hard outer shell, seamless & almost indestructible. Core is 3 lb. high density polyurethane foam. All eyebolts are hot-dipped galvanized medium carbon steel. Eyebolts are permanently bonded inside buoy preventing wear and eventual loss of floatation. Dia.: 18", Buoyancy: 90 lbs., Case: 1
|
|
462-1-HO5118 "Can be used with all SeaStar systems except BayStar, Capilano and 3-line inboard systems. Includes 2 hoses. ID of 5/16". Not for use with SeaStar Pro systems." Length: 18', Box: 2 Sold: Box
|
|
462-58-4402T25 Premium Mark V. Toughest plastics available today. Rock hard outer shell of a nominal 1/8" thickness. The core is 2 lb. high density polyurethane foam. 2" blue band around buoy. Dia.: 18", Tube: 2.5", Buoyancy: 87 lbs., Case: 1 Premium Mark V. Rock hard outer shell of a nominal 1/8" thickness. The core is 2 lb. high density polyurethane foam. 2" blue PVC band around buoy.
|
|
462-218-F10W Unique vinyl valve seals securely Even wall thickness for maximum strength and durability Multiple ribbed reinforced ropeholds Twin-eye design for vertical or horizontal use Designed for use in permanent unprotected moorings, pilings, locks and concrete walls Size: 18" x 50", Case: 2 - Unique vinyl valve seals securely
- Even wall thickness for maximum strength and durability
- Multiple ribbed reinforced ropeholds
- Twin-eye design for vertical or horizontal use
- Designed for use in permanent unprotected moorings, pilings, locks and concrete walls
|
|
462-354-2541181 "Formed 304 stainless steel. 2" Rail height."
Size: 18-1/2", Tube: 3/4" OD"
Sold: Each
|
|
462-661-7198 Self trimming molded rubber bezel.
Sold: Each
|
|
462-57-DV372 1-pc. Replacement Drive Gear Description: 1-pc. Drive Gear Replacement Sold: Each
|
|
462-38-44442 Bronze and imported. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 1" x 3/4"
|
|
462-38-44208 2 " Bronze 45 Degree Street Elbow NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" NOT TO BE USED IN POTABLE WATER SYSTEMS.
|
|
462-354-151560 Formed 316 stainless steel. A: 1/4" , B: 2-3/8" , C: 5/16" , D: 5/16" , Pkg.: Bulk
|
|
462-354-1515601 Formed 316 stainless steel. A: 1/4" , B: 2-3/8" , C: 5/16" , D: 5/16" , Pkg.: Card
|
|
462-38-44108 Brass 90° with female/female threads. NOT TO BE USED IN POTABLE WATER SYSTEMS. Size: 2" Sold: Each
|
|
462-606-252V2004 Ultimate quality corrugated silicone marine exhaust and water hose. Very high temp. 4 to 6 ply polyester reinforcement 350?F (177?C). Wire helix and corrugations allow for excellent flexibility. Dramatically exceeds all standards and lasts up to 6 times longer than black rubber. SAE J2006, ABYC and NMMA. 10 year warranty. ID: 2", Length: 12'
|
|