Generic

Length: 12" , Fastener: #8, Pack: 2

Description: LS2: Supports 10 lbs, Size: 7/16? diam. x 8-1/2? L, Fastener: #8

FishTrax™ 1 handheld fish finder is packed full of features that will help you take your fishing to the next level. VariableZone™ Water Temperature gives you instant water temperature readings and the Fish Depth Scale allowing lets you know exactly how far down the fish is. The VirtuView™ display on your Fish Finder depicts bottom structure with a series of rock indicators.
The FishTrax™ Intelligent Sonar detects depth, locates fish, and defines bottom contour, composition and structure. Simply toss the sonar sensor in the water (or place it inside the hull of your boat) and power the display on.
Includes: FishTrax™ 1 ICON Display and Airmar^® Floatable, Trollable, Boat Mountable Transducer.

:

Sold: Each

Chrome plated bronze.

• Spigot is 1-1/4"
• inside: 2-1/8 x 4-1/8"
• Size: 4-1/4" dia. x 6" dia.
• Fastener: 1/4"

The flushest underwater light on the market, designed to be exchanged without hauling should service be needed. XFM features an exceptionally low profile giving it virtually unlimited hull mounting options and can be retrofitted into most existing underwater lighting hole cutouts, offering immediate benefits of no startup power surge, low heat, minimal maintenance and incredible light output.

• Xchangeable from Inside the Hull
• Plug & Play Lighting System
• Innovative Aluminum Bronze Design
• Tritonium™ Marine Growth Resistant
• Ideal for Attracting Bait and Fish
• 40,000+ Hour Life

Head Gasket

Description: Johnson/Evinrude (OMC) #330818

Sold: Each

Head Gasket

Description: Head Gasket: Yamaha V-4, YM 6E5-11181-02-00

Sold: Each

Head Gasket

Description: Head Gasket: E/J V4 120-140hp '88-96, OMC# 340115

Sold: Each

Head Gasket

Description: Head Gasket: Yamaha V-6, YM 6G5-11181-00-00

Sold: Each

HEAD SCREW NYLON 1/4" Black

Seadog Head Screws have injection molded heads and stainless steel shafts.

Features:
• Head screw: 1/4"-20 x 7/8"
• Length: 1-3/8"

Head Screw Nylon 1/4" White

Seadog Head Screws have injection molded heads and stainless steel shafts. Available in black or white.

• Head screw: 1/4"-20 x 7/8"
• Length: 1-3/8"

Cast Stainless Steel Header Water Pressure T-Valve

The T-Valve is a spring/ball style water flow check valve designed to control the flow and time of release of the water into water injected exhaust headers thus rendering the headers dryer and hot at an idle when properly adjusted and allow water flow at the appropriately tuned higher engine RPM's. -8 AN Male Ports

Heat Exchanger CuNi Yanmar 4 x 19 Verify Length

Verify Length Before Ordering.

"Powder coated/stainless steel. Crimps 22-10 gauge heat shrink terminals. 9" Long.

The Quick Connect system can be used by anyone to install additional outlets or to replumb your boat or recreational vehicle. Whale Quick Connect fittings offer many benefits, all ensuring a high integrity plumbing system. The pipework's flexibility enables tight bends to be formed, hence reducing both the number of fittings and time required at installation. Whale Quick Connectsemi-rigid pipework offers the integrity of metal, but the usability of plastic, and is fully tested and recommended for use with the complete range of Whale fittings.

• Unique ?Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative ?cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

• Unique 'Double Gripper' design provides secure lifelong pipework retention even at excessive pressures


• The innovative 'cage collet' eliminates leaks where fittings are installed close to tight bends


• Collet has internal support ring ensuring o ring seal is held in position and does not distort or leak under pressure


• High integrity single piece moulding improves the strength of the fittings


• Outer sleeve incorporates collet cover, thus preventing accidental pipework release


• Collet clips are not necessary and therefore reduce installation time


• Pipework includes measured cut marks, designed to be a visual guide to ensure that fittings are pushed fully home

Description: "Heat Connector 1/2" Male -1/2" Female"

Sold: Each

Used for engine cooling, ice box, sink, shower drain lines, A/C, bilge and bait box. 2 spiral EPDM hose resists heat, cold, engine water additives and coolants. 50 psi. Max temp of 212° F. Black. 1 year warranty.

ID: 3/4", OD: 1-1/32", Length: 50', Working Pressure: 70#

Used for engine cooling, ice box, sink, shower drain lines, A/C, bilge and bait box. 2 spiral EPDM hose resists heat, cold, engine water additives and coolants. 50 psi. Max temp of 212° F. Black. 1 year warranty.

ID: 5/8", OD: 29/32", Length: 50', Working Pressure: 90#

Barrel collars for shafts - zinc "Heavy Duty"

Heavy Duty Clamp-On Oarlocks Zinc 1/2"

Seadog Heavy Duty Clamp-on Oarlocks are constructed of zinc plated steel and have a 1/2" diameter shaft. The clamp is adjustable to fit most oars. Available in pairs.

• Easily rotates to a towing position with a spring-loaded locking mechanism


• Convenient side crank handle has a large corrugated poly grip handle


• Maneuverability is obtained from offset swivel caster assembly with polypropylene dual wheels


• Complete with all mounting hardware


• Fits square tongues up to 3'' x 5''

Travel: 12", Mount: Bolt-on, Max Load: 1500 lbs.

Sold: Each