Generic

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 400

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 50

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 500

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 60

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 750

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 80

Sold: Each

Fast-acting type fuses ideal for electronic devices. Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Maximum voltage: 32 volts DC. Interrupt capacity: 1000 Amperes DC.

Size: .75'' x .75''

Use with SFE, AGC, or MDL fuses up to 20 Amp
Common bus bar connects hot side of fuses for power feed
Separate bus bar for ground or unfused common hot feed
Brass fuse clips, 8-32 stud terminals

• Use with SFE, AGC, or MDL fuses up to 20 Amp


• Common bus bar connects hot side of fuses for power feed


• Separate bus bar for ground or unfused common hot feed


• Brass fuse clips, 8-32 stud terminals

Gang: 6, Fuse: SFE, AGC, MDL

Sold: Each

Use with SFE, AGC, or MDL fuses up to 20 Amp
Common bus bar connects hot side of fuses for power feed
Separate bus bar for ground or unfused common hot feed
Brass fuse clips, 8-32 stud terminals

• Use with SFE, AGC, or MDL fuses up to 20 Amp


• Common bus bar connects hot side of fuses for power feed


• Separate bus bar for ground or unfused common hot feed


• Brass fuse clips, 8-32 stud terminals

Gang: 4, Fuse: SFE, AGC, MDL

Sold: Each

Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.

Gang: 6, Fuse: AGC/MDL, Neg Bus: Yes, Size: 3.5'' x 5.0''

Sold: Each

Clear insulating cover with label recesses for standard Blue Sea System labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements and stores spare fuses. Nickel-plated metal components and copper contact clips. Rated for 32V max, 100 amps max per block, 30 amps max per circuit. Uses AGC, MDL and all other 3AG glass fuses.

Gang: 6 , Fuse: AGC/MDL, Neg Bus: No, Size: 3.5'' x 5.0''

Sold: Each

"Accepts wide range of ANL Fuse amperages for a versatile ignition protected fusing system. Tin-plated copper bus and stainless steel hardware. A 5/16" (M8) stud terminals. Insulation cover with breakouts allow cable access from all directions. Maximum rating: 32 Volts DC."

Amps: 35-300A, Fuse: ANL, Stud: 5/16" - 18 (M8)", Size: 4.5'' x 1.5''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 12, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3.32'' x 6.47''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 6, Fuse: ATO/ATC, Neg Bus: Yes, Size: 3.32'' x 4.89''

Sold: Each

Clear insulating cover with label recess for small Blue Sea Systems' labels. Cover insulates all conductive parts, satisfying ABYC/USCG requirements. Tin-plated copper buses and fuse clips give 30 Ampere rating per circuit. Rated for 32 Volts DC, 100 Ampere maximum per block. Accepts ATO and ATC fast acting blade type fuses and plug-in style circuit breakers. Thermoplastic base and polycarbonate cover.

Gang: 6, Fuse: ATO/ATC, Neg Bus: No, Size: 3.32'' x 3.65''

Sold: Each

Fuse Block ST Blade 12 12 W/GRD/CVR

Blue Sea Systems Screw Terminal Blade Fuse Blocks have a compact construction that is designed to consolidate branch circuits. This design eliminates the hassle of inline fuses for electronics and other appliances. The available clear insulating cover provides storage for spare fuses, accepts small format labels for identification, and meets ABYC/USCG insulation requirements.

Features:
• Can be used for 24 hour circuits
• Accepts ring or spade type terminals
• 32 VDC
• 30 amps per circuit; 100 amps per block
• ATO/ATC fuses

Fuse Block STblade Bottom 4 circuit Kit

The Blue Sea Systems ST-Blade Battery Terminal Mount Fuse Block Kit is designed to allow easy installation of 4 ATO/ATC fused circuits. It features a ST-Blade battery terminal mount fuse block with 4 screw terminals for securing wire and mounts on the battery terminal stud. It also has a battery positive ground bar with 4 screw terminals.

Features:
• Maximum amperage: 100/Block, 30/Circuit
• Maximum voltage: 32VDC
• Circuits: 4
• Mounting: Clearance for 3/8" stud
• Screw terminal type: #8-32 Screw with captive star lock washer
Included:
• ST-Blade battery terminal mount fuse block
• ATO/ATC 15A Fuse
• (8) Nylon insulated ring terminals
• Battery terminal mount busbar
• Insulating covers

"Solid brass busbar safely carries up to 150A. Two 1/4" -20 diameter brass stud with hex nuts. 8-32 round head screws for attaching wires. Moisture repellent thermoplastic insulator base. 2 mounting holes. Safely carries up to 150 amps."

Gang: 10, Size: 5-3/4" L x 1-1/4" W x 1-1/32" H ", Pack: Clamshell

Sold: Each

Designed to accept automative style spade-terminal fuses. ATO/ATC.
Bulk packed

Rating: 30A, Gauge: 12, Fuse: 30A

Sold: Each

Push in cap is made of stamped brass and molded bakelite.

: