Generic

Fuel Pump Yamaha #68V-13907-00

Replaces: 68V-13907-00, 68V-13907-03

Sold: Each

Connector: Tank Fitting - Male, Fits: 88896, Material: Machined brass, Thread: 1/4" NPT, Hose: -, OEM #: OMC 502867

Attwood fuel tank fittings and hose fittings are suitable for use with leaded, unleaded, ethanol blended and alcohol-blended fuels. Clamps are not included. Use thread sealant tape on all threads.
LP = Low Permeation

Connector: Tank Fitting - Male, Fits: 88966, Material: Machined brass, Thread: 1/4" NPT", Hose: 0, OEM #: Yamaha 6Y1-24305-04

Sold: Each

"This hold-down kit is manufactured from poly strapping to provide superior strength and good looks. The quick release buckle makes it simple to remove and replace container. The hold-down strap unit comes complete with two 62" poly straps equipped with quick release buckles, four footman loops and mounting hardware."

Length: 62"

Sold: Pack

"Replace aging fuel tanks and maximize your fuel capacity space with a Moeller below-deck, permanent tank. Tank system installation kit contains all the parts to install the fuel-fill and through-hull ventilation system. Includes deck fill, hose clamps, chrome/brass thru-hull vent, 1-1/2" fuel fill hose, and 25" of 5/8" vent hose with 5/8" brass hose barb."

Description: Permanent Fuel Tank Installation Kit

Sold: Each

"Eliminates dangerous welding. Complete kit contains everything required for making professional-quality permanent repairs in just minutes. Includes state-of-the-art components and easy-to-follow instructions with photographs to make quick permanent repairs to leaks in all types of metal fuel tanks. It repairs cracks up to 4" (10cm) long and holes up to 3/8" (9mm) in diameter. Repair will be complete when the resin cures in 30 minutes. Tank may be refilled after 30 minutes or when the repair is tack free. Repairs can be made ideally at temperatures from 50° F to 75° F (10° C to 24° C). Repairs made at lower temperatures will take longer to cure. (THIS PRODUCT IS NOT FOR USE ON PLASTIC FUEL TANKS)."

Size: 1 oz

Sold: Each

Compact bracket and separator kit for outboards up to 115hp with 10 micron.

Contains: Bracket: 7774/Filter: 7865, Replaces: Yamaha MAR-MINIF-LT-AS

Sold: Each

Fuel/Water Separator Assembly

Contains: High Capacity Filter.
Replaces Volvo 3847644

Sold: Each

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Johnson/Evinrude, Rating: B1-15

Sold: Each

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Mercury, ('98 & Newer), Rating: B1-15

Sold: Each

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Mercury, Rating: B1-15

Sold: Each

"EPA/CARB COMPLIANT.
Assemblies use a compounded, tough and pliable UV-resistant hose. Promotes maximum fuel flow. All fuel lines, primer bulbs, and fittings are 3/8" unless noted otherwise. Includes fittings built to OEM specifications for replacement parts. Uses o-ring construction on all fittings for tight, leak-free connections."

Application: Yamaha, Rating: B1-15

Sold: Each

• For year-round use
• Special premium low silicate formula
• Safe for all engines including aluminum
• Contains corrosion inhibitors which protect against rust and corrosion of aluminum, copper, solder and brass
• Green in color
• Ethylene glycol base

Size: Gallon, Case: 6

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 100

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 150

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 175

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 200

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 250

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 300

Sold: Each

Tin-plated connector blades for corrosion resistance. Visible indication of blown condition. Interrupt capacity is 6000 Amps DC and 32 volts DC maximum. Ignition protected- safe for installation aboard gasoline powered boats.

Size: 3.185'' x .89'', Amps: 350

Sold: Each